Kusta 500014

Lepro Remote Controller for Tunable White LED Strip Light User Manual

Model: 500014

pengenalan

Thank you for choosing the Lepro Remote Controller for your Tunable White LED Strip Light. This manual provides detailed instructions for setting up, operating, and maintaining your remote control to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

Produk Selesaiview

The Lepro Remote Controller is designed to provide convenient control over your tunable white LED strip lights, allowing you to adjust brightness, color temperature, and activate various lighting modes.

Lepro Remote Controller

Imej: Depan view of the Lepro Remote Controller.

Fungsi Butang Kawalan Jauh

Lepro Remote Controller Button Functions

Image: Diagram illustrating the functions of each button on the Lepro Remote Controller.

  • Butang HIDUP/MATI: Power on or off the LED strip light.
  • 60S OFF Button: Activates a 60-second auto-off timer.
  • Brightness +/- Buttons: Laraskan tahap kecerahan cahaya.
  • WW (Warm White) Button: Sets the light to a warm white color temperature.
  • NW (Neutral White) Button: Sets the light to a neutral white color temperature.
  • DW (Daylight White) Button: Sets the light to a daylight white (cool white) color temperature.
  • Colour Temperature +/- Buttons: Fine-tune the color temperature between warm and cool white.
  • Butang MOD: Cycles through fast/slow flash modes.
  • Scene Buttons (Morning/Evening/Night): Activates pre-set lighting scenes.

Persediaan

Pemasangan Bateri

The remote controller requires 1 Lithium Metal battery (included). Before first use, please remove the insulation sheet from the battery compartment.

Remove Insulation Sheet

Image: Illustration showing how to remove the insulation sheet from the battery compartment.

  1. Cari petak bateri di belakang alat kawalan jauh.
  2. Pull out the plastic insulation sheet if it is present.
  3. If replacing the battery, open the battery cover and insert the new battery, ensuring correct polarity (+/-).
  4. Tutup penutup bateri dengan selamat.

Pairing (If Applicable)

This remote control uses Radio Frequency (RF) technology and is typically pre-paired with compatible Lepro tunable white LED strip lights (e.g., models 410098, 410049). If your remote does not respond to the light strip, ensure the light strip is powered on and within the maximum range of 10 meters. No manual pairing procedure is usually required for this model.

Arahan Operasi

Once the battery is installed, you can begin controlling your LED strip light.

  • Hidupkan/Mati Kuasa: Tekan ke ON button to turn the light on, and the DIMATIKAN butang untuk mematikannya.
  • Pelarasan Kecerahan: Gunakan Kecerahan +/- buttons (sun icon with up/down arrows) to increase or decrease the light intensity.
  • Pemilihan Suhu Warna:
    • Tekan WW for Warm White.
    • Tekan NW for Neutral White.
    • Tekan DW for Daylight White (Cool White).
    Color Temperature Examples

    Image: Visual representation of Warm White, Natural White, and Cool White color temperatures.

  • Fine-tuning Color Temperature: Gunakan Colour Temperature +/- buttons (yellow up/down arrows) to incrementally adjust the color temperature.
  • Mod Kilat: Tekan ke MODE button to cycle through different fast/slow flash modes.
  • Mod Pemandangan: Select pre-set scenes using the dedicated buttons:
    • Morning Scene: (Sunrise icon)
    • Evening Scene: (Sunset icon)
    • Pemandangan Malam: (Moon and stars icon)
  • 60-Second Auto Off: Tekan ke 60S DIMATIKAN button to activate a timer that will turn off the light after 60 seconds.

Penyelenggaraan

Pembersihan

To clean the remote controller, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

Penggantian Bateri

If the remote control's range decreases or it becomes unresponsive, the battery may need to be replaced. Refer to the "Battery Installation" section under Setup for instructions.

Nota: Buang bateri terpakai secara bertanggungjawab mengikut peraturan tempatan.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Remote not responding to light strip.
  • Bateri mati atau lemah.
  • Insulation sheet not removed.
  • Jauh berada di luar jangkauan.
  • Light strip is not powered on.
  • Gantikan bateri.
  • Tanggalkan kepingan penebat.
  • Move closer to the light strip (within 10 meters).
  • Ensure the light strip is properly connected and powered.
Limited range of control.
  • Bateri lemah.
  • Obstructions between remote and light strip.
  • Gantikan bateri.
  • Ensure a clear line of sight or reduce obstructions.

Spesifikasi

  • model: 500014
  • Jenama: Kusta
  • Dimensi Produk: 8.5 x 4 x 0.7 cm
  • Berat: 20 g
  • Bateri: 1 bateri Litium Logam (diperlukan)
  • Teknologi Ketersambungan: Frekuensi Radio (RF)
  • Julat Maksimum: 10 Meter
  • Bilangan Butang: 14
  • Peranti Serasi: Lepro LED Strip Light 410098, LED Strip Light 410049

Maklumat Penting

Kitar Semula Mentol

For information on recycling this product and other types of lamps, please consult local recycling guidelines and facilities.

Maklumat Pecah Mentol Lampu dan Pembersihan

In case of breakage or damage to associated light bulbs, follow proper clean-up and disposal procedures as recommended by local authorities. Avoid direct contact with broken glass or internal components.

Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan pelanggan, sila rujuk laman web rasmi Lepro webtapak atau hubungi peruncit anda. Simpan resit pembelian anda sebagai bukti pembelian.

Untuk bantuan lanjut, anda boleh melawati Kedai Lepro di Amazon.

Dokumen Berkaitan - 500014

Praview Manual Pengguna Lampu Jalur LED Pintar Lepro S1
Manual pengguna yang komprehensif untuk Lampu Jalur LED Pintar Lepro S1 (Model: 2A3MAS1), memperincikan pemasangan, operasi dan ciri.
Praview Manual Pengguna Jalur Lampu LED Lepro dan Spesifikasi
Manual pengguna untuk Jalur Lampu LED Lepro (siri Model PR4100067). Termasuk maklumat pemasangan, keselamatan, spesifikasi dan pelupusan.
Praview Lampu Jalur LED Pintar Lepro S1: Panduan Pemasangan, Ciri dan Keselamatan
Panduan komprehensif untuk Lampu Jalur LED Pintar Lepro S1, meliputi pemasangan, sambungan aplikasi, penyepaduan kawalan suara, langkah berjaga-jaga keselamatan, spesifikasi teknikal dan maklumat waranti.
Praview Pemasangan Lampu Bawah LED Pintar Lepro R2 dan Panduan Pengguna
Panduan komprehensif untuk memasang dan menggunakan Lampu Bawah LED Pintar Lepro R2, meliputi sambungan apl, persediaan kawalan suara, pemasangan dan maklumat keselamatan.
Praview Panduan Tetapan Mentol LED Pintar Lepro BR2 dan Panduan Kawalan Suara
Panduan komprehensif untuk menyediakan Mentol LED Pintar Lepro BR2 anda. Ketahui cara menyambung melalui Bluetooth dan WiFi, sepadukan dengan Amazon Alexa dan Google Assistant dan selesaikan masalah biasa. Termasuk spesifikasi teknikal dan maklumat pematuhan peraturan.
Praview Lepro P1 Smart Plug User Guide and Specifications
Comprehensive guide for the Lepro P1 Smart Plug, covering setup, features, safety warnings, and compliance information for Wi-Fi and voice control integration.