Manual Arahan Lampu Jalur LED Lepro LE 50ft RGB 5050

pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro LE 50ft RGB 5050 LED Strip Lights. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Arahan Keselamatan

Pastikan bekalan kuasa diputuskan sebelum pemasangan atau penyelenggaraan.
This product is designed for indoor use only. Avoid exposure to water or high humidity.
Do not connect the LED strip to the power supply while it is still coiled on the reel. Unroll the strip completely before powering on to prevent overheating.
Use only the provided 12V ETL-listed power adapter. Using an incompatible power supply may damage the product and void the warranty.
Do not bend the LED strip at sharp angles (less than 90 degrees) to avoid damaging the circuit board or LEDs.
Jauhkan daripada kanak-kanak.
If any damage is observed on the strip or power adapter, discontinue use immediately and contact customer support.

Kandungan Pakej

Contents of the Lepro LE 50ft RGB 5050 LED Strip Lights package

Image: The complete package contents including two rolls of LED strip lights, a remote control, a power adapter, and fixing clips with screws.

Sila sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

2 x 24.6ft (total 50ft) RGB 5050 LED Strip Lights
1 x IR Remote Controller (44-key)
1 x 12V ETL-listed Power Adapter
1 x Kotak Kawalan
Membetulkan Klip dan Skru
Manual Pengguna (dokumen ini)

Spesifikasi

Nombor Model	410105-RGB-US
Warna Cerah	RGB (Merah, Hijau, Biru)
Jenis Sumber Cahaya	5050 LED
Jumlah Panjang	50 Feet (2 x 24.6ft rolls)
LEDs per Meter	30 LED
Sumber Kuasa	Corded Electric, 12V Adapter
Wattage	36 Watt
Jenis Pengawal	Kawalan Jauh IR (44 kekunci)
Penggunaan Dalaman/Luar	Dalaman Sahaja
bahan	plastik
Dimensi Produk	5.31 x 3.15 x 5.35 inci (pakej)
Berat Barang	14.72 auns

Persediaan & Pemasangan

Ikuti langkah-langkah berikut untuk pemasangan lampu jalur LED anda dengan betul:

Sediakan Permukaan:
Before attaching the LED strip, ensure the installation surface is clean, dry, and smooth. Wipe the surface with a clean cloth to remove dust or debris. This ensures optimal adhesion of the 3M adhesive backing.

Image: A hand wiping a wooden surface with a cloth, illustrating the first step of surface preparation.
Sambungkan Komponen:
Connect the 4-pin connector from the LED strip to the control box. Ensure the arrow mark on the strip's connector aligns with the arrow mark on the control box. Then, connect the DC wire from the power adapter to the control box. Finally, plug the power adapter into a standard electrical outlet.
Image: A visual guide demonstrating how to connect the DC wire to the control box and the 4-pin connector to the LED strip, emphasizing arrow alignment.

Penting: Ensure the "arrow" mark on the LED strip connector and the "12V" mark on the control box are on the same side for correct polarity.
Image: Detail of the RGB light strip, highlighting the 10mm 4-pin connector and the strong 3M self-adhesive backing for installation.
Pasang Jalur LED:
Peel off the protective backing from the 3M adhesive on the back of the LED strip. Carefully press the strip onto the prepared surface, applying firm and even pressure along its entire length. For added security, use the included fixing clips and screws at regular intervals, especially around corners or areas with less adhesion.

Image: A hand demonstrating how to peel and attach the LED strip to a surface, showing the adhesive backing.
Penyediaan Alat Kawalan Jauh:
Before using the remote control, pull out the transparent plastic chip from the battery compartment. This activates the battery.
Image: A close-up showing a hand pulling the transparent plastic chip from the remote control, indicating battery activation.

Installation Demonstration Video

Video: A demonstration of the Lepro LED Strip Lights in various indoor settings, showcasing color changes and potential applications. This video provides visual examples of how the lights can be installed and used to enhance different environments.

Operasi

Your LED strip lights are controlled by the included 44-key IR remote control. Point the remote directly at the IR receiver on the control box for optimal response.

Layout of the 44-key IR remote control for Lepro LED strip lights

Imej: A terperinci view of the 44-key remote control, showing buttons for power, brightness adjustment, RGB color selection, 6 DIY color buttons, and various dynamic modes like Jump, Fade, Quick, Slow, and Auto.

Hidupkan/Mati Kuasa: Tekan ke red power button to turn the lights on or off.
Pelarasan Kecerahan: Gunakan butang anak panah atas dan bawah (above the R, G, B, W buttons) to increase or decrease brightness.
Pilihan Warna: Tekan mana-mana 20 color buttons to select a static color.
Warna DIY:
1. Tekan salah satu DIY1-DIY6 buttons.
2. Gunakan RGB up/down arrows to adjust the intensity of Red, Green, and Blue to create your desired custom color.
3. Press the same DIY button again to save the custom color.
Mod Dinamik:
- LOMPAT 3 / LOMPAT 7: Berkitar melalui 3 atau 7 warna dengan kesan lompatan.
- FADE3 / FADE7: Pudar antara 3 atau 7 warna.
- CEPAT / PERLAHAN: Adjusts the speed of dynamic modes.
- AUTO: Cycles through all available dynamic modes.
- KILAT: Flashes through colors.

Penyelenggaraan

Pembersihan: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
Storan: If storing the lights for an extended period, ensure they are clean and dry. Store in a cool, dry place away from direct sunlight.
Lekatan: If the adhesive begins to lose its stickiness, you can reinforce the strip with additional fixing clips or a suitable adhesive tape (not included).

Menyelesaikan masalah

Masalah	Kemungkinan Punca	Penyelesaian
Lampu tidak menyala.	Power adapter not plugged in. Remote control battery not activated or dead. Connections are loose or incorrect. IR receiver blocked.	Ensure power adapter is securely plugged into an outlet and the control box. Pull out the plastic chip from the remote battery compartment. Replace battery if necessary. Check all 4-pin and DC connections for secure fit and correct polarity (arrow alignment). Ensure no obstructions between the remote and the IR receiver on the control box.
Alat kawalan jauh tidak bertindak balas.	Plastic chip not removed from remote. Bateri jauh hampir habis atau mati. Remote is too far or not pointed at IR receiver.	Remove the transparent plastic chip. Gantikan bateri kawalan jauh (CR2025). Ensure remote is within range and pointed directly at the control box's IR receiver.
Warna tidak betul atau tidak konsisten.	Incorrect 4-pin connection polarity. Damaged LED segment.	Disconnect and reconnect the 4-pin connector, ensuring arrow alignment. If a segment is damaged, it may not be repairable. Contact customer support.
LED strip is falling off the surface.	Surface not properly cleaned. Adhesive worn out.	Re-clean the surface thoroughly before re-applying. Use the included fixing clips and screws, or apply additional adhesive tape (not included) for reinforcement.

Waranti & Sokongan

Lepro products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your LED strip lights, please contact Lepro customer service through the retailer where the product was purchased or visit the official Lepro webtapak.

Please have your model number (410105-RGB-US) and purchase details ready when contacting support.

Lepro 410105-RGB-US