pengenalan
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT EN1 Electric Height Adjustable Standing Desk. Please read this manual thoroughly before use to ensure proper function and safety.
Figure 1: FLEXISPOT EN1 Electric Height Adjustable Standing Desk (White Frame + White Desktop)
Maklumat Keselamatan
Untuk mengelakkan kecederaan atau kerosakan, patuhi langkah berjaga-jaga keselamatan berikut:
- Jangan melebihi kapasiti berat maksimum 154 lbs (70 kg).
- Ensure the desk is stable and level before and during height adjustments.
- Keep hands and objects clear of moving parts during operation.
- Jangan benarkan kanak-kanak mengendalikan meja tanpa pengawasan orang dewasa.
- Gunakan hanya penyesuai kuasa dan komponen yang disediakan.
- If any unusual noise or movement occurs, immediately stop operation and unplug the desk.
For detailed safety guidelines, refer to the "Important Information" section of the product listing.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- Desktop (One-Piece, White)
- Bingkai Meja (Putih)
- Panel Kawalan
- Penyesuai Kuasa
- Alat Perhimpunan
- Manual Arahan
- Cangkuk Fon Kepala
Figure 2: All components included in the FLEXISPOT EN1 Standing Desk package.
Figure 3: The FLEXISPOT EN1 desk may ship in two separate boxes: one for the desktop and one for the frame.
Persediaan dan Perhimpunan
Follow these steps for proper assembly. A detailed installation video is available for visual guidance.
- Buka Pembungkusan Komponen: Keluarkan semua bahagian dari bungkusan dengan berhati-hati dan letakkannya di atas permukaan yang bersih dan rata.
- Pasang Kerangka Meja: Attach the lifting columns to the foot supports using the provided screws and tools. Ensure all connections are secure.
- Lampirkan Desktop: Place the desktop upside down on a soft, protective surface. Align the desk frame with the pre-drilled holes on the underside of the desktop. Secure the frame to the desktop using the provided screws. Note: Some users may need to drill two additional pilot holes for the middle of the desk if not pre-drilled. Use a hand screwdriver for final tightening to avoid overtightening.
- Pasang Panel Kawalan: Mount the control panel to the underside of the desktop in the designated area. Connect the necessary cables from the control panel to the motor and power supply.
- Sambungkan Kuasa: Plug the power adapter into the desk's control box and then into a wall outlet.
- Initial Reset (First Use): After connecting power, perform an initial reset. Press and hold the "Down" button until the desk reaches its lowest position, then release. The desk may move slightly up and down to calibrate.
- Pasang Cangkuk Fon Kepala: Secure the headphone hook to the side of the desk as desired.
Figure 4: Dual-stage legs provide continuous height adjustment and stability.
Video 1: Official FLEXISPOT Standing Desk Installation Guide. This video provides a step-by-step visual walkthrough of the assembly process for your desk.
Arahan Operasi
Your FLEXISPOT EN1 desk features an intuitive control panel for height adjustment and memory presets.
Figure 5: Programmable Control Panel with LED Display, Up/Down buttons, and 4 Height Memory Settings.
Operasi asas:
- Menyelaraskan Tinggi: Gunakan ▲ dan ▼ arrows on the control panel to raise or lower the desk to your desired height. The current height will be displayed on the LED panel.
- Julat Ketinggian: Meja boleh dilaraskan daripada ketinggian minimum 28.9 inci hingga ketinggian maksimum 46.5 inci.
- Operasi senyap: The motor operates quietly, with noise levels below 50 dB.
Pratetap Memori:
Meja ini membolehkan anda menyimpan sehingga empat tetapan ketinggian pilihan untuk diingat semula dengan cepat.
- Tetapkan Kedudukan Memori: Laraskan meja mengikut ketinggian yang anda inginkan. Tekan ke "M" button (or the button with a person icon) followed by one of the numbered memory buttons (1, 2, 3, atau 4). The display will show "S-" followed by the number, indicating the position is saved.
- Ingat Kedudukan Ingatan: Press the corresponding numbered memory button (1, 2, 3, atau 4) untuk menggerakkan meja secara automatik ke ketinggian yang disimpan.
Note: The motor has a protection mechanism that may temporarily stop operation after continuous use (e.g., 2 minutes) to prevent overheating. If this occurs, wait approximately 15 minutes for the motor to cool down before resuming operation.
Penyelenggaraan
Regular maintenance ensures the longevity and smooth operation of your desk.
- Pembersihan: Lap desktop dan bingkai dengan lembut, damp kain. Elakkan pembersih yang melelas atau bahan kimia keras yang boleh merosakkan kemasan.
- Pengurusan Kabel: Periodically check and organize cables to prevent tangling or interference with the desk's movement. The desk includes a headphone hook which can also be used for cable management.
- Pelinciran: The lifting columns are generally maintenance-free. Do not apply lubricants unless specifically instructed by customer support.
- Pengagihan Berat: Agihkan berat secara sama rata ke seluruh meja untuk mengelakkan ketegangan pada motor dan rangka.
Menyelesaikan masalah
Jika anda menghadapi masalah dengan meja anda, rujuk masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Meja tidak bergerak. | Power cable disconnected, motor overheating, control panel issue. | Check power connections. Allow motor to cool down (15 mins). Perform a reset (hold "Down" button). |
| Meja bergerak tidak sekata atau mengeluarkan bunyi yang luar biasa. | Uneven weight distribution, loose connections, obstruction. | Redistribute weight. Check all screws and connections. Remove any obstructions. |
| Meja berhenti pada pertengahan pergerakan. | Overload protection activated, motor overheating. | Reduce weight on desk. Allow motor to cool down (15 mins). |
| Pratetap memori tidak berfungsi. | Pratetap tidak disimpan dengan betul. | Re-save memory positions as per "Operating Instructions". |
If the problem persists, please contact FLEXISPOT customer support.
Spesifikasi
- model: EN1 (156E)
- Dimensi Desktop: 48"D x 24"W (One-Piece)
- Julat Pelarasan Tinggi: 28.9" hingga 46.5"
- Kapasiti Berat: Sehingga 154 paun (70 kg)
- Tahap Bunyi Motor: < 50 dB
- Bahan Bingkai: Keluli Aloi
- Bahan Desktop: Kayu Kejuruteraan
- warna: White Frame + White Desktop
- Ciri Khas: 4 Memory Presets, Headphone Hook
- Perhimpunan: Diperlukan (Alat disertakan)
Figure 6: Key dimensions of the FLEXISPOT EN1 Standing Desk.
Figure 7: Detailed dimensions for the desktop (48"x24") and adjustable height range of the desk frame (28.9"-46.5").
Waranti dan Sokongan
FLEXISPOT provides a limited warranty for this product. For specific warranty details and duration, please refer to the product documentation included with your purchase or visit the official FLEXISPOT webtapak.
Sokongan Pelanggan: If you have any questions during assembly or use, or require technical assistance, please do not hesitate to contact FLEXISPOT customer support. Contact information can typically be found on the product packaging or the official FLEXISPOT webtapak.
Anda juga boleh melawat Kedai FLEXISPOT di Amazon untuk mendapatkan maklumat lanjut dan sumber sokongan.
