Monoprice 139786

Monoprice 14AWG NEMA 5-15P to IEC 60320 C13 Power Cord User Manual

Model: 139786

pengenalan

This manual provides essential information for the safe and effective use of your Monoprice 14AWG NEMA 5-15P to IEC 60320 C13 Power Cord. This power cord is designed to connect devices with an IEC 60320 C14 panel connector, such as PCs, monitors, scanners, and printers, to a standard North American AC wall outlet. Its 14AWG construction ensures robust power delivery for demanding applications.

Maklumat Keselamatan

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to equipment.

Persediaan

Follow these steps to properly set up your Monoprice power cord:

  1. Identify connectors: Locate the NEMA 5-15P (standard 3-prong wall plug) and the IEC 60320 C13 (female connector for devices) ends of the power cord.
  2. Sambung ke peranti: Insert the IEC 60320 C13 connector into the corresponding male IEC 60320 C14 inlet on your device (e.g., computer power supply, monitor). Ensure a firm connection.
  3. Sambungkan ke sumber kuasa: Plug the NEMA 5-15P end of the power cord into a standard, grounded North American AC wall outlet, UPS, or other compatible AC power source.
Monoprice 3-Prong Power Cord with NEMA 5-15P plug and IEC 60320 C13 connector
Image: The Monoprice 3-Prong Power Cord, featuring the NEMA 5-15P plug and IEC 60320 C13 connector. This image illustrates the overall design and robust construction of the cable.

For a visual comparison of the cable's thickness and quality, please refer to the video below:

Video: This video demonstrates the significant thickness difference between the Monoprice 14AWG power cable and a standard power supply cable, highlighting the superior gauge for enhanced safety and power handling.

Arahan Operasi

Once properly connected, the Monoprice power cord will supply power to your device. No further operational steps are required for the cord itself. Ensure your device's power switch is in the 'On' position if applicable.

Penyelenggaraan

To ensure the longevity and safe operation of your power cord, follow these maintenance guidelines:

Menyelesaikan masalah

If you encounter issues with your power cord, refer to the following table:

MasalahKemungkinan PuncaPenyelesaian
Peranti tidak menerima kuasaSambungan longgarEnsure both ends of the power cord are fully inserted.
Peranti tidak menerima kuasaIsu salur keluar kuasaTest the outlet with another device or check the circuit breaker.
Peranti tidak menerima kuasaKabel kuasa yang rosakInspect the cord for damage. Replace if necessary.
Tali terasa hangatBeban berlebihan atau pengudaraan yang lemahReduce the load on the circuit or ensure adequate airflow around the cord. If the cord is excessively hot, discontinue use immediately.

Spesifikasi

CiriPerincian
Penyambung 1NEMA 5-15P (Male, Grounded)
Penyambung 2IEC 60320 C13 (Female)
Pengukur dawai14 AWG
Penilaian Semasa15 Amps (Maksimum)
Voltage Peringkat125V
Jenis JaketSJT (Service Junior Thermoplastic)
warnaHitam
Dimensi Produk6.5 x 5.5 x 2 inci (pembungkusan)
Berat Barang2.88 auns
Nombor Model139786
PengeluarMonoprice

Waranti dan Sokongan

Monoprice products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Monoprice website. For technical support or further assistance, please contact Monoprice customer service through their official channels.

Dokumen Berkaitan - 139786

Praview Monoprice 35435 Mini SLA Printer Firmware Update Guide
Step-by-step instructions for updating the firmware on the Monoprice 35435 Mini SLA Printer to the latest version.
Praview Monoprice Select Mini 3D Printer User's Manual
Comprehensive user's manual for the Monoprice Select Mini 3D Printer, covering safety guidelines, setup, software installation (Cura, Repetier-Host), operation, and regulatory compliance. Includes detailed instructions for optimal 3D printing.
Praview Monoprice Cable Plate with Flexible Opening, 2-Gang, Black - Quick Installation Guide (P/N 12583)
Step-by-step installation guide for the Monoprice Cable Plate with Flexible Opening (2-Gang, Black, P/N 12583). Learn how to safely install low voltage cables behind your flat panel TV and audio/video devices.
Praview Panduan Permulaan Pantas Kawalan Kelantangan Monoprice 60W dengan Suis A/B
Panduan permulaan pantas untuk Kawalan Kelantangan Monoprice 60W dengan Suis A/B (P/N 38176). Dokumen ini menyediakan arahan untuk menyambungkan dua amppengatur kepada pengawal kelantangan tunggal, pemasangan, persediaan, penentukuran dan spesifikasi teknikal. Ia serasi dengan amppenghawa dingin sehingga 120 watt dan direka bentuk untuk sepasang pembesar suara.
Praview Monoprice Maker Ultimate 2 3D Printer Quick Start Guide
Quick start guide for the Monoprice Maker Ultimate 2 3D Printer (P/N 36045), covering unboxing, setup, menu operation, and first print instructions. Learn about its FFF printing features, package contents, and customer support.
Praview Monoprice Maker Select 3D Printer User Manual
This user manual provides comprehensive instructions for setting up, operating, and maintaining the Monoprice Maker Select 3D Printer (Model 13860), covering features, software, and technical support.