1. Arahan Keselamatan Penting
Please read all instructions carefully before using the Toyomi EWP 747 Electric Water Dispenser. Retain this manual for future reference.
- Always ensure the appliance is placed on a stable, level, heat-resistant surface, away from the edge of the countertop.
- Jangan rendamkan perkakas, kord, atau palam ke dalam air atau sebarang cecair lain.
- Jauhkan daripada kanak-kanak. Pengawasan rapi diperlukan apabila perkakas digunakan berhampiran kanak-kanak.
- Jangan kendalikan perkakas dengan kord atau palam yang rosak, atau selepas perkakas tidak berfungsi atau rosak dalam apa jua cara.
- Cabut plag dari alur keluar apabila tidak digunakan dan sebelum membersihkan. Biarkan sejuk sebelum memakai atau menanggalkan bahagian, dan sebelum membersihkan perkakas.
- Jangan gunakan di luar rumah. Perkakas ini adalah untuk kegunaan rumah sahaja.
- Elakkan sentuhan dengan bahagian yang bergerak.
- Jangan letakkan pada atau berhampiran gas panas atau penunu elektrik, atau dalam ketuhar yang dipanaskan.
- Always fill the water tank with cold water only.
- Exercise extreme caution when dispensing hot water to prevent burns.
2. Produk Lebihview
The Toyomi EWP 747 is a 7.0L electric water dispenser designed to provide both hot and warm water. It features a stainless steel inner pot and multiple safety mechanisms for reliable operation.
Rajah 2.1: Depan view of the Toyomi EWP 747 Electric Water Dispenser. This image shows the overall design of the unit, including the water level indicator and dispensing area.
Komponen Utama:
- Panel Kawalan: Located on the top, with buttons for various functions.
- Tangki Air: Internal 7.0L capacity for water storage.
- Penunjuk Aras Air: Tingkap lutsinar untuk memantau isipadu air.
- Dispensing Spouts: Separate spouts for hot and warm water.
- Dulang Drip: Removable tray to catch spills.
- Kord Kuasa: Untuk menyambung ke salur keluar elektrik.
Figure 2.2: Close-up of the control panel on the Toyomi EWP 747. This image highlights the 'Warm Water Dispense', 'Boil/Reboil', 'Keep Warm', 'Hot Water Dispense', and 'Reboil' buttons.
3. Persediaan
- Membongkar: Carefully remove the water dispenser from its packaging. Retain packaging materials for future transport or storage.
- penempatan: Place the appliance on a firm, level, and heat-resistant surface. Ensure there is adequate ventilation around the unit and keep it away from walls or other appliances. Do not place it near heat sources or in direct sunlight.
- Pembersihan Awal: Before first use, clean the inner pot and exterior. Refer to the 'Maintenance and Cleaning' section for detailed instructions. It is recommended to boil and discard at least two full tanks of water to remove any manufacturing residues.
- Mengisi Tangki Air: Open the lid and fill the inner pot with fresh, cold drinking water up to the 'MAX' fill line. Do not overfill. Close the lid securely.
- Sambungan Kuasa: Plug the power cord into a grounded electrical outlet (230V). The unit will enter standby mode.
4. Arahan Operasi
Rebusan Awal:
After filling the water tank and plugging in the unit, the dispenser will automatically begin the boiling process. The 'BOIL/REBOIL' indicator light will illuminate. Once boiling is complete, the unit will switch to 'KEEP WARM' mode, and the corresponding indicator light will turn on.
Mengeluarkan Air Panas:
- Place a cup or container under the 'HOT WATER DISPENSE' spout.
- Tekan dan tahan butang PENYELESAIAN AIR PANAS button. Hot water will flow from the spout.
- Lepaskan butang untuk menghentikan pengeluaran.
Dispensing Warm Water:
- Place a cup or container under the 'WARM WATER DISPENSE' spout.
- Tekan dan tahan butang WARM WATER DISPENSE button. Warm water will flow from the spout.
- Lepaskan butang untuk menghentikan pengeluaran.
Reboil Function:
If the water has been kept warm for an extended period or if you wish to reboil the water, press the REBUL button. The unit will reboil the water to the desired temperature and then return to 'KEEP WARM' mode.
Ciri-ciri Keselamatan:
- Fuzzy Logical Auto-Refill Water Control: Automatically manages water levels.
- Anti-Unboiled-Water System Micro-Switch: Prevents dispensing of unboiled water.
- 3 Level Overheating Protection: Ensures safe operation by preventing the unit from overheating.
5. Penyelenggaraan dan Pembersihan
Regular cleaning and maintenance will ensure the longevity and optimal performance of your water dispenser.
- Sebelum Pembersihan: Sentiasa cabut plag perkakas dari salur keluar kuasa dan biarkan ia sejuk sepenuhnya sebelum dibersihkan.
- Pembersihan Luaran: Lap permukaan luar dengan lembut, damp kain. Jangan gunakan pembersih yang melelas, pad penyental atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan.
- Inner Pot Cleaning: The stainless steel inner pot can be cleaned with a soft sponge and mild dish soap. Rinse thoroughly. Ensure no water enters the electrical components.
- Dulang Drip: Remove and empty the drip tray regularly. Wash it with warm, soapy water and rinse thoroughly before reattaching.
- Mengurangkan: Over time, mineral deposits (limescale) may build up in the inner pot, especially in areas with hard water. To descale:
- Fill the inner pot with a mixture of water and white vinegar (1:1 ratio) or a descaling solution designed for kettles.
- Allow the solution to soak for several hours or overnight, depending on the severity of the limescale.
- Boil the solution (if using vinegar, ensure good ventilation).
- Drain the solution and rinse the inner pot thoroughly several times with fresh water to remove any residue and odor.
- Perform a few cycles of boiling and discarding fresh water before resuming normal use.
- Storan: If storing the appliance for an extended period, ensure it is clean, dry, and unplugged. Store it in a cool, dry place.
6. Penyelesaian masalah
If you encounter issues with your water dispenser, please refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Perkakas tidak dihidupkan. | Tiada bekalan kuasa. | Periksa sama ada kord kuasa dipasang dengan selamat ke soket yang berfungsi. |
| Air tidak memanaskan. | Unit not plugged in or power issue. Faulty heating element. | Ensure power is connected. If problem persists, contact customer support. |
| Water dispensing slowly or not at all. | Low water level. Dispensing spout clogged. Limescale buildup. | Check water level and refill if necessary. Clean the dispensing spout. Perform descaling as per maintenance instructions. |
| Air mempunyai rasa atau bau yang luar biasa. | New appliance residue. Limescale buildup. Stale water. | Perform initial cleaning and boil/discard water cycles. Descale the unit. Use fresh water. |
If the problem persists after attempting these solutions, please contact Toyomi customer support for assistance.
7. Spesifikasi
Technical details for the Toyomi EWP 747 Electric Water Dispenser:
Figure 7.1: Toyomi EWP 747 Electric Water Dispenser with approximate dimensions shown. The unit measures approximately 41 cm (16.1 in) in width, 30.5 cm (12 in) in depth, and 45 cm (17.7 in) in height.
| Jenama | Toyomi |
| Model | EWP 747 |
| Kapasiti | 7.0 Liter |
| Voltage | 230 Volt |
| Wattage | 800 Watt |
| bahan | Keluli Tahan Karat (Periuk Dalam) |
| Dimensi Produk (L x W x H) | 41 x 30.5 x 45 cm |
| Berat badan | 4.6 kg |
| Jenis Sumber Kuasa | Elektrik Bertali |
8. Waranti dan Sokongan
This Toyomi EWP 747 Electric Water Dispenser comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or warranty claims, please contact your retailer or the official Toyomi customer service. Keep your proof of purchase (receipt) handy as it may be required for warranty validation.
Contact information for Toyomi customer support can typically be found on the manufacturer's webtapak atau pada pembungkusan produk.
