Manual+

Renkforce PRO3

Renkforce PRO3 3D Printer Instruction Manual

Model: RF-4318370

1. Pengenalan

This manual provides essential instructions for the safe and efficient operation of your Renkforce PRO3 3D Printer, model RF-4318370. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

2. Arahan Keselamatan

Observe the following safety precautions to prevent injury or damage to the printer:

3. Kandungan Pakej

Selepas membongkar, sahkan bahawa semua komponen ada dan tidak rosak:

If any items are missing or damaged, contact your retailer immediately.

4. Produk Lebihview

Familiarize yourself with the main components of your Renkforce PRO3 3D Printer.

Depan view of the Renkforce PRO3 3D Printer, showing the enclosed print chamber, print head, build plate, and control panel at the bottom.

Rajah 4.1: Depan view of the Renkforce PRO3 3D Printer. This image displays the printer's overall design, including the enclosed print chamber, the print head mechanism, the build plate, and the integrated control panel located at the base of the unit. The filament guide tube is visible at the top.

Bersudut di hadapan-kanan view of the Renkforce PRO3 3D Printer, highlighting its black and white casing dan komponen dalaman.

Rajah 4.2: bersudut view of the Renkforce PRO3 3D Printer. This perspective shows the printer's black front frame and white side panels, offering a clearer view of the internal structure, including the linear rails, print head, and heated build plate. The control panel is also visible.

Close-up of the Renkforce PRO3 3D Printer's print head and build plate, actively printing a small yellow object.

Rajah 4.3: Close-up of the print head and build plate during operation. This image focuses on the extruder assembly, the heated build plate, and a small yellow 3D-printed object being created. A "Caution high temperature" warning label is visible on the build plate.

Detailed close-up of the Renkforce PRO3 3D Printer's extruder and hotend assembly, showing cooling fans and wiring.

Rajah 4.4: Terperinci view of the extruder and hotend assembly. This close-up highlights the components responsible for melting and extruding filament, including the cooling fans, heat sink, and nozzle. A "Caution high temperature" warning is prominently displayed on the hotend.

5. Persediaan

Follow these steps to set up your Renkforce PRO3 3D Printer:

  1. Membongkar: Carefully remove the printer from its packaging. Remove all protective foam, tape, and ties.
  2. penempatan: Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight and heat sources.
  3. Sambungan Kuasa: Connect the power cable to the printer and then to a grounded electrical outlet. Do not power on yet.
  4. Pemuatan Filamen:
    • Mount the filament spool onto the designated holder.
    • Feed the filament through the guide tube and into the extruder mechanism.
    • Follow the on-screen instructions or manual controls to preheat the nozzle and load the filament until it extrudes smoothly.
  5. Membina Pelarasan Plat: Ensure the build plate is properly leveled. Refer to the printer's control panel menu for the auto-leveling function or manual leveling instructions. Proper leveling is crucial for successful prints.
  6. Pemasangan Perisian: Install the necessary 3D printing software (slicer) on your personal computer (compatible with Windows operating systems). This software converts 3D models into printable instructions (G-code).

6. Arahan Operasi

Once set up, you can begin your first print:

  1. Sediakan Model 3D: Obtain or create a 3D model file (e.g., .STL, .OBJ).
  2. Potong Model: Open the 3D model in your slicing software. Configure print settings such as layer height, infill, print speed, and support structures. The software will generate a G-code file.
  3. Pindahkan kod G: Simpan kod G file to an SD card or transfer it directly to the printer via USB (if supported by your software and printer connection type, which is RF for this model).
  4. Mula Mencetak: Insert the SD card into the printer. Navigate the printer's control panel to select the G-code file and start the print.
  5. Cetakan Monitor: Observe the first few layers to ensure proper adhesion and extrusion. Monitor the print progress periodically.
  6. Alih Keluar Cetakan: Once the print is complete and the build plate has cooled, carefully remove the printed object using the provided spatula.

7. Penyelenggaraan

Regular maintenance ensures optimal performance and longevity of your printer:

8. Penyelesaian masalah

Berikut ialah penyelesaian kepada isu biasa yang mungkin anda hadapi:

MasalahKemungkinan PuncaPenyelesaian
Filamen tidak mengekstrusiClogged nozzle, incorrect temperature, tangled filament.Clean the nozzle, verify print temperature settings, ensure filament spool unwinds freely.
Poor bed adhesionUnleveled bed, dirty build plate, incorrect bed temperature.Re-level the build plate, clean the surface with isopropyl alcohol, adjust bed temperature in slicer settings.
Peralihan lapisanLoose belts, print head hitting print, excessive print speed.Check and tension belts, ensure no obstructions, reduce print speed.
Stringing/OozingIncorrect retraction settings, too high nozzle temperature.Adjust retraction distance and speed in slicer, slightly lower nozzle temperature.

For further assistance, consult online resources or contact Renkforce customer support.

9. Spesifikasi

Key technical specifications for the Renkforce PRO3 3D Printer (Model RF-4318370):

10. Waranti dan Sokongan

Specific warranty information for the Renkforce PRO3 3D Printer is not available in this document. Please refer to the warranty card included with your product packaging or visit the official Renkforce webtapak untuk terma dan syarat jaminan terperinci.

For technical support, troubleshooting beyond this manual, or spare parts inquiries, please contact Renkforce customer service through their official channels.