pengenalan
This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.
Rajah 1: Depan view of the Sharp Digital Alarm Clock.
Ciri-ciri Produk
- AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
- Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
- High/Low Dimmer Control: Kecerahan paparan boleh laras.
- Bateri Sandaran: Pre-installed CR2032 battery for time settings retention during power outages.
- Pemilihan Zon Waktu: Easily select your local time zone.
Figure 2: Key features of the Sharp Digital Alarm Clock.
Persediaan
1. Initial Power-Up and Time Zone Selection
- Locate the time zone switch on the bottom of the clock.
- Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
- Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.
2. Daylight Savings Time (DST) Adjustment
To adjust for Daylight Savings Time:
- Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
- For Standard Time, slide the switch to DIMATIKAN to subtract one hour (-1 hr).
3. Sandaran Bateri
The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.
Arahan Operasi
Figure 3: Top panel controls and display indicators.
1. Menetapkan Penggera
- Tekan ke SET ALARM button once. The alarm time will flash on the display.
- Tekan ke SET JAM button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
- Tekan ke SET MINIT butang untuk menyesuaikan minit penggera.
- Tekan ke SET ALARM butang sekali lagi untuk mengesahkan dan keluar dari mod tetapan penggera.
2. Turning Alarm On/Off
- Untuk menghidupkan penggera ON, tekan butang ALARM ON / OFF button. The alarm indicator light on the display will illuminate.
- Untuk menghidupkan penggera DIMATIKAN, tekan butang ALARM ON / OFF button again. The alarm indicator light will turn off.
3. Fungsi Tunda
Apabila penggera berbunyi, tekan besar MENGEJUTKAN butang yang terletak di bahagian atas jam. Penggera akan berhenti sementara dan berbunyi semula selepas kira-kira 9 minit.
4. Dimmer Control
Untuk melaraskan kecerahan paparan LED:
- Tekan ke DIMMER HI/LO button to toggle between high and low brightness settings.
Figure 4: Display brightness adjustment.
Penyelenggaraan
Battery Replacement (CR2032)
The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, bateri mungkin perlu diganti.
- Unplug the clock from the electrical outlet.
- Locate the screw-secured battery compartment on the bottom of the clock.
- Unscrew the compartment cover and carefully remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring the correct polarity (+ side up).
- Replace the compartment cover and secure it with the screw.
- Plug the clock back into the electrical outlet.
Nota: Buang bateri lama secara bertanggungjawab mengikut peraturan tempatan.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan jam kosong. | Tiada kuasa. | Ensure the clock is securely plugged into a working electrical outlet. Check the power source. |
| Masa tidak betul. | Incorrect time zone selected; DST switch incorrect; Power interruption. | Verify the time zone switch on the bottom of the clock. Check the DST switch position. If power was interrupted, the AccuSet should reset the time; if not, check/replace backup battery. |
| Penggera tidak berbunyi. | Penggera tidak diaktifkan; Masa penggera yang ditetapkan salah. | Ensure the alarm indicator light is on (press ALARM ON/OFF button). Verify the alarm time is set correctly. |
| Paparan terlalu terang/malap. | Tetapan dimmer perlu dilaraskan. | Press the DIMMER HI/LO button to cycle through brightness settings. |
Spesifikasi
- Jenama: tajam
- model: B089ZMSR39
- warna: Black-red Led
- Jenis Paparan: digital
- Ciri Khas: Set Auto
- Dimensi Produk: 5.5"W x 2.6"H
- Sumber Kuasa: Elektrik Bertali
- Bateri Sandaran: 1 x Ion Litium CR2032 (termasuk)
- Berat Barang: 10.2 Auns
- UPC: 049353004426
- Pengeluar: tajam
Rajah 5: Dimensi produk.
Maklumat Tambahan
For further assistance or product inquiries, please refer to the official Sharp webtapak atau hubungi sokongan pelanggan mereka.
Produk ini direka untuk kegunaan dalaman sahaja.
