HUBERT Floor Standing Hand Soap Dispenser with Sign

Produk Selesaiview

The HUBERT Floor Standing Hand Soap Dispenser with Sign is designed for convenient and hygienic hand sanitization or soap dispensing in various environments. This automatic, hands-free unit features a durable stainless steel stand with a weighted base for stability and includes a drip tray to maintain cleanliness. The dispenser is refillable and compatible with gel or liquid soap and hand sanitizer (foam not supported). A clear window allows for easy monitoring of product levels, and a blinking LED light indicates when battery replacement is needed. For security, the dispenser includes a lock and key. A removable red 'STOP The Spread of Germs' sign is also included to promote hand hygiene.

Ciri-ciri Utama:

• Stainless steel stand with weighted base for stability.
• Automatic, hands-free operation for enhanced hygiene.
• Compatible with gel or liquid soap/sanitizer (1000 ml capacity).
• Dispenses 0.8 ml per use.
• Integrated drip tray to prevent floor messes.
• Clear window for easy product level monitoring.
• Blinking LED light for low battery indication.
• Includes lock and key for security.
• Removable 'STOP The Spread of Germs' sign.

Figure 1: Fully assembled HUBERT Floor Standing Hand Soap Dispenser with the 'STOP' sign attached.

Persediaan dan Perhimpunan

Minor assembly is required to set up your dispenser. Please follow these steps carefully:

1. Buka Pembungkusan Komponen: Carefully remove all components from the packaging. You should have the stand base, the vertical pole sections, the dispenser unit, the drip tray, the 'STOP' sign, and any necessary hardware (screws, lock and key).
2. Pasang Pendirian: Attach the vertical pole sections to the weighted base. Ensure all connections are secure.
3. Pasang Bateri: The dispenser requires 4 C batteries (not included). Open the battery compartment, typically located on the back or side of the dispenser unit, and insert the batteries according to the polarity markings. Close the compartment securely.
4. Attach Dispenser to Stand: Secure the dispenser unit to the top of the assembled stand. Ensure it is firmly attached and stable.
5. Install Drip Tray: Slide or clip the drip tray into its designated position directly below the dispenser nozzle. This tray collects any excess liquid and helps keep the floor clean.
6. Attach Sign (Optional): If desired, attach the 'STOP The Spread of Germs' sign to the top of the dispenser unit using the provided hardware. The stand can be used with or without this sign.

Rajah 2: Sisi view of the dispenser unit mounted on the stand, showing the drip tray.

Figure 3: The dispenser unit with its front cover open, revealing the internal reservoir for refilling.

Arahan Operasi

The HUBERT dispenser is designed for simple, hands-free operation.

1. Mengisi Dispenser: Unlock the dispenser using the provided key and open the front cover. Remove the internal cartridge/reservoir. Fill the reservoir with your preferred gel or liquid hand soap or sanitizer. Do not use foam products. The capacity is 1000 ml (33.81 oz). Reinsert the cartridge and close the cover, ensuring it locks securely.
2. Pendispensan Automatik: Place your hands approximately 2-4 inches below the dispenser nozzle. The built-in sensor will detect your hands and automatically dispense approximately 0.8 ml of product.
3. Product Level Monitoring: The clear window on the front of the dispenser allows for quick visual inspection of the product level. Refill when the level is low to ensure continuous operation.

Rajah 4: Jarak dekat view of the dispenser's nozzle and drip tray, ready for use.

Penyelenggaraan

Penyelenggaraan yang kerap memastikan ketahanan dan prestasi optimum dispenser anda.

• Pengisian semula: As described in the 'Operating Instructions', refill the dispenser with gel or liquid soap/sanitizer when the product level is low. Always use the provided key to unlock and open the dispenser.
• Pembersihan: Regularly wipe down the exterior of the dispenser and the stand with a soft, damp cloth. Clean the drip tray frequently to prevent accumulation of dispensed product and maintain hygiene. The drip tray can be removed for thorough cleaning.
• Penggantian Bateri: A blinking LED light on the dispenser indicates that the batteries are low and need replacement. Replace all 4 C batteries simultaneously to ensure proper function. Dispose of old batteries responsibly.
• Keselamatan: Always ensure the dispenser is locked after refilling or maintenance to prevent theft or tampering.

Menyelesaikan masalah

If you encounter issues with your HUBERT dispenser, refer to the following common solutions:

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support regarding your HUBERT Floor Standing Hand Soap Dispenser, please contact the manufacturer or the seller directly. The seller for this product is Hubert Company.

Hubert Company Contact:

• Untuk bantuan, sila layari Hubert Company seller page on Amazon.