Manual+

Lepro 410084-RGB-US-NF-a

Lepro 32.8ft RGB LED Strip Lights User Manual

Model: 410084-RGB-US-NF-a

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Lepro 32.8ft RGB LED Strip Lights kit showing two rolls of LED strips, a remote control, and a power adapter.

Figure 1: Complete Lepro LED Strip Lights Kit

2. Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

  • 2 x 16.4ft (5m) RGB LED Strip Lights
  • 1 x 44-Key IR Remote Control
  • Penyesuai Kuasa 1 x 12V
  • 1 x Control Box (IR Receiver)

3. Pemasangan dan Persediaan

Ikuti langkah ini untuk pemasangan yang betul:

  1. Sediakan Permukaan: Pastikan permukaan pemasangan bersih, kering dan licin. Habuk, minyak atau kelembapan boleh menjejaskan prestasi pelekat.
  2. Ukur dan Potong (Pilihan): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
  3. Pasangkan Jalur: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
  4. Sambungkan Komponen:
    • Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
    • Connect the 12V power adapter to the control box.
    • Palamkan penyesuai kuasa ke soket elektrik standard.
  5. Aktifkan Alat Jauh: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Diagram showing the connection of LED strip lights to the control box and power adapter, with an arrow indicating to pull out the plastic chip from the remote.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

Video 1: Official Lepro LED Strip Lights Overview dan Aplikasi Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.

4. Arahan Operasi

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

44-key IR remote control for LED strip lights, showing buttons for colors, brightness, and dynamic modes.

Figure 3: 44-Key IR Remote Control Layout

Fungsi Kawalan Jauh:

  • Hidup/Mati: Power button to turn the lights on or off.
  • Pelarasan Kecerahan: Up/Down arrows to increase or decrease brightness.
  • Pilihan Warna: 20 preset static colors, including Red, Green, Blue, and White.
  • Warna DIY: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
  • Mod Dinamik: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. Penyelenggaraan

To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:

  • Pembersihan: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
  • Persekitaran: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
  • Penjagaan Pelekat: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. Penyelesaian masalah

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
Lampu tidak menyala.
  • Penyesuai kuasa tidak disambungkan.
  • Remote battery depleted or plastic tab not removed.
  • Incorrect connection between strip and control box.
  • Ensure power adapter is securely plugged into outlet and control box.
  • Remove plastic tab from remote battery. Replace battery if necessary.
  • Verify arrow alignment on all connectors.
Alat kawalan jauh tidak berfungsi.
  • Alat kawalan jauh tidak dihalakan ke penerima IR.
  • Halangan antara alat kawalan jauh dan penerima.
  • Remote battery issue.
  • Point remote directly at the small black IR receiver on the control box.
  • Keluarkan sebarang halangan.
  • Check/replace remote battery.
Some LEDs show incorrect color or are off.
  • Damage to a section of the LED strip.
  • Sambungan yang salah.
  • Inspect the strip for physical damage. If a section is damaged, it may require replacement.
  • Pastikan semua sambungan selamat.
LED strip falls off surface.
  • Surface not clean or smooth.
  • Tekanan tidak mencukupi semasa pemasangan.
  • Clean the surface thoroughly before re-applying.
  • Apply firm, even pressure along the entire strip during installation. Consider using additional adhesive clips for heavy-duty applications.

7. Spesifikasi Produk

CiriPerincian
JenamaKusta
Nombor Model410084-RGB-US-NF-a
warnaRGB (Merah, Hijau, Biru)
Penggunaan Dalaman/LuarDalaman
Ciri KhasBoleh dimalapkan
Jenis Sumber CahayaLED
Sumber KuasaElektrik Bertali
bahanTembaga, Plastik
Jenis PengawalAlat Kawalan Jauh
Bilangan Sumber Cahaya300 (total for 32.8ft)
Voltage12 Volt
Wattage36 watt
Berat Barang0.33 Kilogram (11.6 auns)
Panjang Item32.8 Feet (2 x 16.4ft)

8. Maklumat Waranti

Produk ini dilindungi oleh a Waranti 2 tahun from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. Sokongan Pelanggan

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.

Dokumen Berkaitan - 410084-RGB-US-NF-a

Praview Manual Pengguna Lampu Jalur LED Pintar Lepro S1
Manual pengguna yang komprehensif untuk Lampu Jalur LED Pintar Lepro S1 (Model: 2A3MAS1), memperincikan pemasangan, operasi dan ciri.
Praview Manual Pengguna Jalur Lampu LED Lepro dan Spesifikasi
Manual pengguna untuk Jalur Lampu LED Lepro (siri Model PR4100067). Termasuk maklumat pemasangan, keselamatan, spesifikasi dan pelupusan.
Praview Lampu Jalur LED Pintar Lepro S1: Panduan Pemasangan, Ciri dan Keselamatan
Panduan komprehensif untuk Lampu Jalur LED Pintar Lepro S1, meliputi pemasangan, sambungan aplikasi, penyepaduan kawalan suara, langkah berjaga-jaga keselamatan, spesifikasi teknikal dan maklumat waranti.
Praview Manual Pengguna dan Panduan Keselamatan Lampu Luar Kekal LED Lepro AI
Panduan komprehensif untuk lampu luaran kekal LED Lepro AI, meliputi pemasangan, sambungan aplikasi, kawalan suara, langkah berjaga-jaga keselamatan dan spesifikasi teknikal untuk model E1-30, E1-60 dan E1-90.
Praview Manual Pengguna dan Spesifikasi Lampu Rentetan Luar LED Lepro ZB1 AI
Manual pengguna yang komprehensif dan spesifikasi teknikal untuk lampu rentetan luar LED Lepro ZB1 AI, ciri-ciri terperinci, pemasangan dan maklumat pematuhan.
Praview Pemasangan Lampu Bawah LED Pintar Lepro R2 dan Panduan Pengguna
Panduan komprehensif untuk memasang dan menggunakan Lampu Bawah LED Pintar Lepro R2, meliputi sambungan apl, persediaan kawalan suara, pemasangan dan maklumat keselamatan.