ATuMan LS-P 40m Laser Distance Meter User Manual

1. Pengenalan

The ATuMan LS-P 40m Laser Distance Meter is a high-precision, portable device designed for accurate and reliable measurements. It integrates multiple functions including distance, area, volume, angle, and Pythagorean measurements, making it a versatile tool for various applications.

Key features of this device include:

• High precision for accurate and reliable measuring.
• 11 functions controlled with two intuitive keys.
• Supports up to 3500 measurements on a single charge.
• Capable of volume, angle, area, and distance measurements.

Rajah 1: Depan view of the ATuMan LS-P 40m Laser Distance Meter, displaying its screen and single control button.

2. Persediaan

2.1 Mengecas Peranti

The LS-P 40m is equipped with a built-in Lithium Ion battery. Before first use, or when the battery indicator shows low power, charge the device using the provided USB cable.

1. Connect the small end of the USB cable to the charging port on the side of the device.
2. Sambungkan hujung kabel USB yang satu lagi ke penyesuai kuasa USB standard (tidak disertakan) atau port USB komputer.
3. The charging indicator on the screen will show the charging status. A full charge supports approximately 3500 measurements.

Figure 2: The LS-P 40m device connected to a USB cable for charging, highlighting its USB flash charging capability.

2.2 Menghidupkan/Mematikan

• To power on: Press and hold the main button until the screen illuminates.
• To power off: Press and hold the main button until the screen turns off. The device also features an automatic power-off function after a period of inactivity to conserve battery.

3. Arahan Operasi

The LS-P 40m features a simple two-key control system for all its 11 functions. The primary button is used for measurements and mode selection, while the secondary button (if present, or a long press of the primary) is for switching modes or clearing data.

Gambar 3: Lebihview of the device's capabilities, emphasizing its high precision, 11 functions, and long battery life for up to 3500 measurements.

3.1 Pengukuran Jarak Asas

1. Ensure the device is powered on and in basic distance measurement mode (usually the default).
2. Halakan pancaran laser ke permukaan sasaran.
3. Press the main button once to activate the laser.
4. Press the main button again to take the measurement. The distance will be displayed on the screen.

Gambar 4: Cthamples of practical applications, including distance measurement for furniture and area measurement for a window.

3.2 Pengukuran Kawasan

1. Switch to Area Measurement mode. This is typically done by pressing the mode button until the area icon appears on the screen.
2. Measure the length of the first side (e.g., width) by pointing the laser and pressing the main button.
3. Measure the length of the second side (e.g., height) by pointing the laser and pressing the main button.
4. Peranti akan mengira dan memaparkan kawasan secara automatik.

3.3 Pengukuran Isipadu

1. Switch to Volume Measurement mode.
2. Measure the length, width, and height sequentially as prompted by the device's display.
3. Peranti akan mengira dan memaparkan volum secara automatik.

Figure 5: Visual representations of volume measurement within a room and angle measurement on a staircase.

3.4 Pengukuran Sudut

1. Switch to Angle Measurement mode.
2. Follow the on-screen prompts to measure the necessary points to determine the angle.
3. The calculated angle will be displayed.

3.5 Pengukuran Pythagoras

The device supports various Pythagorean modes (e.g., single Pythagorean, double Pythagorean) to calculate indirect measurements. Refer to the on-screen icons for specific prompts for each Pythagorean function.

1. Pilih mod Pythagoras yang diingini.
2. Measure the required sides as indicated by the flashing segments on the display.
3. The device will calculate and display the unknown side.

4. Penyelenggaraan

4.1 Pembersihan

• Lap peranti dengan lembut, damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Ensure the laser lens and display are clean for optimal performance. Use a lens cleaning cloth if necessary.

4.2 Penyimpanan

• Simpan peranti di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
• The device features an aluminum-magnesium alloy casing for durability, but it should still be protected from drops and impacts.

Rajah 6: Satu terperinci view of the device's robust aluminum-magnesium alloy casing, designed for durability.

4.3 Penjagaan Bateri

• Cas bateri dengan kerap, walaupun peranti tidak kerap digunakan, untuk mengekalkan kesihatan bateri.
• Elakkan daripada menghabiskan bateri sepenuhnya sebelum mengecas semula.
• If storing for an extended period, charge the battery to approximately 50% before storage.

5. Penyelesaian masalah

5.1 Peranti Tidak Dihidupkan

• Ensure the battery is sufficiently charged. Connect the device to a USB charger and allow it to charge for at least 30 minutes before attempting to power on again.
• Press and hold the power button for several seconds to ensure proper power-on attempt.

5.2 Inaccurate Measurements or Laser Not Visible

• Ensure the laser lens is clean and free from dust or smudges.
• Measurements taken in bright sunlight or on highly reflective/absorbent surfaces may be less accurate or difficult to obtain. Try to measure in shaded areas or use a target plate if available.
• Verify that the measurement reference point (front or rear of the device) is correctly set for your application.

5.3 Hayat Bateri Pendek

• Pastikan peranti dicas sepenuhnya sebelum digunakan.
• Frequent use of the laser or backlight can consume battery faster.
• Battery performance can degrade over time. If battery life significantly shortens, consider contacting customer support.

6. Spesifikasi

Figure 7: The compact size of the LS-P 40m, demonstrating its portability as it fits into a shirt pocket.

7. Waranti dan Sokongan

Specific warranty details are not provided in the product information. For warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly through their official channels. Keep your purchase receipt as proof of purchase.