SWIFT S7 Series Trinocular Stereo Zoom Microscope Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the assembly, operation, and maintenance of your SWIFT S7 Series Trinocular Stereo Zoom Microscope. This professional-grade microscope is designed for a wide range of applications, including research, gemology, engraving, electronics inspection, and biological laboratory work. It offers a magnification range of 3.5X-90X with included accessories, providing clear and sharp images for detailed observation.

2. Maklumat Keselamatan

• Always handle the microscope with care. Avoid sudden movements or impacts.
• Place the microscope on a stable, level surface to prevent tipping.
• Jauhkan mikroskop daripada cahaya matahari langsung, suhu tinggi, habuk dan bahan kimia yang menghakis.
• Ensure the power supply is disconnected before cleaning or performing any maintenance.
• Do not attempt to disassemble optical or electrical components beyond what is described in this manual. Refer to qualified service personnel for repairs.
• Use only the provided power adapter for the LED ring light.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir semasa membongkar:

• Microscope Body (Trinocular Head with 0.7X-4.5X Zoom Objective)
• Table Pillar Stand with Base
• WF10X Eyepieces (2)
• Eyepiece Eyeshields (2)
• 0.5X Auxiliary Objective
• 2.0X Auxiliary Objective
• 56-Bulb LED Ring Light
• Power Adapter for LED Ring Light
• Black & White Reversible Stage Pinggan
• Stage Clips (2)
• Penutup Habuk
• Manual Pengguna
• Optional: Camera Mount, Eyepiece Camera, Data Wire (if purchased separately)

4. Arahan Persediaan

Follow these steps to assemble your microscope:

1. Mount the Microscope Body:
   Adjust the table pillar stand to a proper height. Carefully place the microscope body into the ring of the table pillar stand. Secure it by tightening the fixed knob on the stand.
2. Install the LED Ring Light:
   Slide the 56-bulb LED ring light onto the objective housing at the bottom of the microscope body. Tighten the small bolt on the ring light to secure it. Connect the power wire from the ring light to its power adapter.
3. Install Eyepieces and Eyeshields:
   Attach the rubber eyeshields to the top of each WF10X eyepiece. Insert the eyepieces into the eyepiece tubes on the trinocular head. Ensure they are fully seated.
4. Place the Working Stage:
   Choose either the black or white side of the reversible stage plate depending on your sample contrast needs. Place it into the circular recess on the microscope base. Use the stage clips to hold samples in place if necessary.
5. Optional: Install Auxiliary Objectives:
   For extended magnification ranges, screw the 0.5X or 2.0X auxiliary objective onto the bottom of the main zoom objective.

Penerangan Imej: A lengkap view of the SWIFT S7 Series Trinocular Stereo Zoom Microscope, disassembled with its main components including the microscope head, pillar stand, eyepieces, auxiliary objectives, and LED ring light.

5. Arahan Operasi

1. Menghidupkan:
   Connect the LED ring light's power adapter to an electrical outlet. Turn on the power switch for the LED illumination.
2. Placing a Sample:
   Place your specimen on the working stage. Gunakan stage clips to hold it securely if needed.
3. Adjusting Magnification (Zoom):
   Rotate the zoom handwheel on the microscope body to adjust the magnification from 0.7X to 4.5X. With the WF10X eyepieces, this provides a 7X-45X magnification range. Additional auxiliary objectives (0.5X, 2.0X) can extend this range.
4. Memfokuskan:
   While looking through the eyepieces, slowly turn the focusing handwheel (large knob on the side of the stand) until the specimen comes into sharp focus.
5. Melaraskan Diopter:
   If one eye sees a sharper image than the other, adjust the diopter ring on the eyepiece until both eyes perceive a clear, unified image.
6. Melaraskan Jarak Interpupillary:
   Gently push or pull the eyepiece tubes apart or together until you see a single, circular field of view.
7. Trinocular Port Usage (for Camera):
   The trinocular port allows for the attachment of a camera for digital imaging. Remove the dust cap from the trinocular port. Install the camera mount, then attach the eyepiece camera. Connect the camera to a computer using the provided data wire.

Penerangan Imej: Satu jarak dekat view of the SWIFT S7 Series microscope with its 56-bulb LED ring light illuminating a circuit board placed on the stage, demonstrating its application for electronics inspection.

Penerangan Imej: A composite image highlighting key features of the microscope head: 45-degree ergonomic tilt, 360-degree rotation for flexible viewing, diopter adjustment on eyepieces, the 0.7X-4.5X zoom objective, and securing screws to prevent components from falling.

6. Camera Installation and Digital Imaging

For digital capture and analysis, follow these steps to integrate a camera with your microscope:

1. Prepare the Trinocular Port:
   Remove the protective cap from the trinocular port located on top of the microscope head.
2. Assemble Camera Components:
   If your camera requires an adapter or C-mount, assemble these components according to the camera's instructions.
3. Install Camera Mount:
   Insert the camera mount into the trinocular port and secure it.
4. Lampirkan Kamera:
   Carefully attach your eyepiece camera to the installed camera mount.
5. Sambung ke Komputer:
   Connect the camera to your computer using the appropriate data cable (e.g., USB). Install any necessary software or drivers provided with your camera.
6. Operasi Perisian:
   Launch the camera software on your computer. The software will display the live image from the microscope. Use the software to capture images, record videos, and perform measurements or analysis.

Penerangan Imej: The SWIFT S7 Series microscope with an attached camera connected to a laptop, showing a magnified view of a circuit board on the computer screen, illustrating its digital imaging capabilities.

7. Penyelenggaraan

• Pembersihan Optik: Use a soft, lint-free cloth and specialized lens cleaning solution for optical surfaces. Avoid touching lenses with bare hands.
• Pembersihan Badan: Lap badan mikroskop dengan kain lembut,amp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Storan: When not in use, cover the microscope with the provided dust cover to protect it from dust and debris. Store in a dry, cool place.
• Pelinciran: Moving parts are factory-lubricated. Do not apply additional lubricants unless specifically instructed by SWIFT support.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the official SWIFT webtapak atau hubungi pengedar sah anda. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.