1. Pengenalan
This manual provides comprehensive instructions for the installation, operation, and maintenance of your OKIN Wired Remote Control for electric slatted bed base motors. Please read this manual carefully before use to ensure proper functionality and longevity of your product.
2. Produk Lebihview
The OKIN wired remote control is designed for seamless operation of electric slatted bed bases. It features a durable wired connection and intuitive buttons for adjusting bed positions.
Figure 1: OKIN Wired Remote Control. The image shows a black, rectangular remote control with six round buttons arranged in two columns. Each button has a blue arrow or bed icon indicating its function. A coiled black cable extends from the bottom of the remote, leading to a round connector plug at the end.
2.1. Komponen
- Remote Control Unit: The main handheld device with control buttons.
- Wired Cable: Connects the remote control to the bed base motor.
- Palam Penyambung: Plugs into the motor unit.
3. Persediaan
- Locate the Motor Connection Port: Identify the designated port on your electric slatted bed base motor for the remote control connection. This port is typically a multi-pin circular socket.
- Connect the Remote Control: Carefully align the pins of the remote control's connector plug with the holes in the motor's connection port. Gently push the plug into the port until it is securely seated. Do not force the connection.
- Secure the Cable (Optional): If your bed base has cable management clips or channels, route the remote control cable through them to prevent tangling or damage.
- Hidupkan kuasa: Ensure your electric bed base is connected to a power source and turned on.
Nota: The remote control is wired and does not require batteries. Ensure the connection is firm for proper operation.
4. Arahan Operasi
The OKIN wired remote control features intuitive buttons for adjusting your electric bed base. The specific functions may vary slightly depending on your bed base model, but generally, the buttons control the head and foot sections.
4.1. Fungsi Butang
- Head Up/Down Buttons: Typically located at the top, these buttons (often with an arrow pointing up and down, or a bed icon with the head section highlighted) control the elevation and lowering of the head section of the bed.
- Foot Up/Down Buttons: Usually located in the middle or lower section, these buttons (often with an arrow pointing up and down, or a bed icon with the foot section highlighted) control the elevation and lowering of the foot section of the bed.
- Simultaneous Movement Buttons: Some remotes may have buttons that move both head and foot sections simultaneously, or return the bed to a flat position. Refer to the icons on your specific remote.
4.2. Petua Penggunaan
- Press and hold the desired button to continuously adjust the bed position. Release the button to stop movement.
- Ensure there are no obstructions under or around the bed base before adjusting its position.
5. Penyelenggaraan
Proper care will extend the life of your OKIN remote control.
- Pembersihan: Lap alat kawalan jauh dengan kain lembut dan kering. Untuk kotoran degil, lap sedikitamp cloth can be used, but ensure no moisture enters the remote. Do not use abrasive cleaners or solvents.
- Penjagaan Kabel: Avoid kinking, twisting, or placing heavy objects on the cable. Regularly inspect the cable for any signs of wear or damage.
- Storan: When not in use, store the remote in a safe place where it won't be dropped or damaged.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Alat kawalan jauh tidak bertindak balas. | Loose connection; Power issue with bed base; Damaged cable/remote. | Ensure the connector plug is fully inserted into the motor port. Check if the bed base is properly plugged into a power outlet and receiving power. Inspect the cable for visible damage. If damaged, replacement may be necessary. |
| Bed moves intermittently. | Intermittent connection; Motor issue. | Check the cable connection for looseness. Ensure the cable is not pinched or strained. If the issue persists, consult a qualified technician for motor inspection. |
| Butang terasa melekit atau tidak bertindak balas. | Kotoran atau serpihan di bawah butang. | Clean the remote control surface. Avoid spilling liquids on the remote. |
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | OKIN |
| Nombor Model | 753510672792 |
| warna | Hitam |
| Teknologi Ketersambungan | berwayar |
| Peranti Serasi | OKIN Electric Bed |
| Bilangan Butang | 15 |
| Julat Maksimum | 10 Meter |
8. Waranti dan Sokongan
Specific warranty information for this product is not available in the provided details. For any support inquiries, technical assistance, or warranty claims, please contact the retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
Untuk bantuan lanjut, sila rujuk maklumat hubungan yang diberikan oleh tempat pembelian anda.
