1. Pengenalan
The FLIPSKY V4 Wireless Bluetooth Module (Model: bluetooth) is designed to facilitate wireless communication between a FLIPSKY Electronic Speed Controller (ESC) and compatible tools on Linux or mobile devices (Android/iOS) via Bluetooth Low Energy (BLE). This module enables real-time parameter monitoring and adjustment, as well as firmware updates, enhancing the user experience for electric skateboard and other electric vehicle projects.
Rajah 1: Depan view of the FLIPSKY V4 Wireless Bluetooth Module.
2. Produk Lebihview
The module integrates an NRF51822 onboard chip and features a compact design for easy integration. It provides essential connectivity for advanced ESC management.
Rajah 2: Belakang view of the module, showing the NRF51822 chip and connectors.
Rajah 3: Terperinci view of the NRF51822 onboard chip.
3. Spesifikasi
| Ciri | Penerangan |
|---|---|
| Model | bluetooth (FSBLMO1) |
| Vol Operasitage | DC 2V-12V |
| Kadar Baud | 115200 |
| Kekerapan | 2.4G |
| Cip Onboard | NRF51822 |
| Peranti yang Disokong | Android / iOS mobile devices |
| Kefungsian | Real-time parameter display, motor/app settings adjustment, firmware upgrade, FSESC terminal input. |
4. Persediaan & Pemasangan
This module connects to your FLIPSKY ESC to enable wireless communication. Ensure your ESC is powered off before making any connections.
4.1. Connecting to FSESC 4.12
Connect the Bluetooth module to the UART port on your FSESC 4.12 using the provided JST-PH2.0 7P connector. Ensure correct pin orientation (GND, VTX, VRX, VIN, 3.3V wire, 3.3V or 5V, ADC).
Figure 4: Wiring diagram for connecting the Bluetooth module to FSESC 4.12.
4.2. Connecting to FSESC 6.6
For FSESC 6.6, connect the Bluetooth module to the UART port using the JST-PH2.0 8P connector. Pay close attention to the pin assignments for proper functionality (GND, VTX, VRX, VIN, 3.3V wire, 3.3V or 5V, ADC).
Figure 5: Wiring diagram for connecting the Bluetooth module to FSESC 6.6.
4.3. Jenis Penyambung
The module uses JST-PH2.0 connectors for different ESC versions.
Figure 6: JST-PH2.0 8P (for V6) and 7P (for V4) connectors.
5. Arahan Operasi
5.1. Connecting via VESC Tool App
Once the module is correctly installed and the ESC is powered on, you can connect to it wirelessly using the VESC Tool application on your Android or iOS mobile device. The app allows you to:
- Display real-time parameters (motor current, motor power, duty cycle, battery voltage, battery current, MOS temperature, motor temperature, charging current, charging power, ERPM).
- Adjust parameters in motor settings (General, BLDC, DC, FOC, PID Controllers, Additional info).
- Adjust parameters in app settings (General, PPM, ADC, UART, Nunchuk Nrf).
- Tingkatkan perisian tegar.
Gambar 7: Cthample of the mobile display interface in the VESC Tool app.
5.2. Proses Kemas Kini Perisian Tegar
The module supports firmware updates via mobile phones. Follow the instructions within the VESC Tool application for a successful update. It is crucial to ensure a stable power supply during the update process to prevent damage.
Video 1: Tutorial on firmware update for FLIPSKY ESC Tool V1.0, demonstrating the process of connecting the ESC to a computer, entering bootloader mode, and flashing new firmware. This video is relevant for understanding the firmware update procedure for FLIPSKY ESCs, which the Bluetooth module facilitates.
6. Penyelenggaraan
To ensure the longevity and optimal performance of your FLIPSKY V4 Wireless Bluetooth Module, observe the following maintenance guidelines:
- Keringkan: Protect the module from moisture and water exposure.
- Sambungan Selamat: Periksa semua sambungan pendawaian secara berkala untuk memastikan ia selamat dan bebas daripada kakisan.
- Kebersihan: Keep the module free from dust and debris. Use a soft, dry cloth for cleaning.
- Suhu: Operate the module within its specified temperature range to prevent overheating.
7. Penyelesaian masalah
If you encounter issues with your FLIPSKY V4 Wireless Bluetooth Module, consider the following steps:
- Isu Sambungan: Ensure the module is correctly connected to the ESC's UART port. Verify that the ESC is powered on.
- Kesambungan Apl: Check your mobile device's Bluetooth settings and ensure it is enabled. Restart the VESC Tool app and attempt to reconnect.
- Keserasian Perisian Tegar: Ensure that the ESC firmware and VESC Tool app version are compatible. Refer to FLIPSKY's official resources for the latest compatibility information.
- Bekalan Kuasa: Confirm that the module is receiving adequate power (2V-12V DC).
- Module Damage: Inspect the module for any visible signs of damage.
For persistent issues, consult the official VESC Project forums or contact FLIPSKY customer support.
8. Waranti & Sokongan
For warranty information, technical support, or further assistance, please refer to the official FLIPSKY webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda untuk tuntutan waranti.
