Sunco 6-Pack 6-Inch LED Flush Mount Disk Light Instruction Manual

1. Pengenalan

Thank you for choosing Sunco Lighting. This manual provides detailed instructions for the safe installation, operation, and maintenance of your Sunco 6-Pack 6-Inch LED Flush Mount Disk Lights. Please read this manual thoroughly before installation and retain it for future reference.

Image: Six Sunco 6-inch LED flush mount disk lights, showing their sleek, round design.

2. Maklumat Keselamatan

AMARAN: Risiko kebakaran atau kejutan elektrik. Pemasangan Kit Retrofit LED memerlukan pengetahuan tentang sistem elektrik luminair. Jika tidak layak, jangan cuba pemasangan. Hubungi juruelektrik bertauliah.

• Putuskan sambungan kuasa sebelum pemasangan atau penyelenggaraan.
• Pastikan bekalan voltage ialah 120V AC.
• Jangan buat atau ubah sebarang lubang terbuka dalam kepungan pendawaian atau komponen elektrik semasa pemasangan kit.
• Untuk mengelakkan kerosakan atau lelasan pendawaian, jangan dedahkan pendawaian pada tepi kepingan logam atau objek tajam lain.
• Peranti ini tidak dimaksudkan untuk digunakan dengan pintu keluar kecemasan.
• Sesuai untuk damp lokasi.

3. Kandungan Pakej

Each pack includes:

• 6 x Sunco 6-Inch LED Flush Mount Disk Lights
• TP24 Connectors
• E26 Connectors
• Wire Nuts (for Junction Box installation)
• Spring Clips (pre-attached for Can Install)
• Skru Pemasangan

4. Spesifikasi

Image: Key specifications of the LED Disk Light including 1050 Lumens, 110° Beam Angle, and 15W Wattage.

Image: The 3000K Warm White light output, designed for a pleasant ambiance.

Image: Diagram showing the compact size of the disk light, with a 7.5-inch diameter and 2-inch height, along with installation accessories.

5. Arahan Pemasangan

The Sunco LED Disk Lights offer versatile installation options for both existing recessed cans and direct wiring to a junction box.

Image: Visual guide illustrating three installation methods: Junction Box with wire nuts, TP24 Can Connection with spring clips, and E26 Can Connection with spring clips.

5.1. Option 1: Recessed Can Installation (TP24 or E26)

1. Matikan kuasa: Ensure power to the fixture is turned off at the circuit breaker.
2. Remove existing trim and bulb: Carefully remove the old trim and unscrew the existing bulb from the recessed can.
3. Sambungkan penyesuai: Screw the appropriate adapter (TP24 or E26) into the socket of the recessed can.
4. Connect disk light: Plug the disk light's connector into the adapter.
5. Secure disk light: Gently push the disk light into the recessed can. The spring clips will hold it securely in place. Ensure the light is flush with the ceiling.

5.2. Option 2: Junction Box Installation

1. Matikan kuasa: Ensure power to the junction box is turned off at the circuit breaker.
2. Prepare wires: Strip the ends of the house wiring (live, neutral, ground) if necessary.
3. Sambung wayar: Use the provided wire nuts to connect the disk light's wires to the corresponding house wires (black to black, white to white, green/bare copper to ground).
4. Mount disk light: Align the disk light with the junction box and secure it using the provided mounting screws. Ensure the light is flush with the ceiling.

6. Arahan Operasi

Your Sunco LED Flush Mount Disk Light is designed for easy operation and features dimmable capabilities.

6.1. Hidupkan/Mati Kuasa

Simply use your standard wall switch to turn the light on or off. For optimal performance and energy savings, ensure the light is off when not in use.

6.2. Fungsi Pemalapan

This LED disk light is 10%-100% dimmable, allowing you to adjust the brightness to your desired level. To utilize the dimming feature, you must connect the light to a compatible LED dimmer switch (sold separately).

Image: Illustration of the 10% to 100% dimmable range of the LED disk light, controlled by a compatible dimmer switch.

Image: A living room scene demonstrating the adjustable brightness of the dimmable LED disk lights from 10% to 100% via a dimmer switch.

6.3. Compatible Dimmers

For optimal dimming performance, use one of the following recommended dimmer models:

Image: A table listing compatible dimmer models from brands like Lutron and Leviton.

Image: An extended table listing additional compatible dimmer models from various brands.

7. Penyelenggaraan

The Sunco LED Flush Mount Disk Light requires minimal maintenance.

• Pembersihan: Ensure the power is off before cleaning. Wipe the light fixture with a soft, dry, or slightly damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar, kerana ia boleh merosakkan kemasan atau komponen elektrik.
• Tiada Penggantian Mentol: These LED fixtures have integrated LED chips and do not require bulb replacement.
• Pemeriksaan: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.

8. Penyelesaian masalah

If you encounter issues with your LED disk light, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact Sunco Lighting customer support.

9. Waranti dan Sokongan

Sunco Lighting stands behind the quality of its products.

Image: Sunco Lighting's commitment to quality, highlighting 7-year coverage, 45-year lifetime (based on 3 hours/day usage), and reliable customer support.

Produk ini disertakan dengan a Perlindungan 7 Tahun warranty. For warranty claims or technical assistance, please contact Sunco Lighting customer support directly. Our knowledgeable support specialists are available to assist you.

Maklumat Hubungan: Please refer to the official Sunco Lighting weblaman web atau dokumentasi pembelian anda untuk butiran hubungan terkini.

10. Mengenai Sunco Lighting

Sunco Lighting is an American company dedicated to providing high-quality, energy-efficient lighting solutions. With over 25 years of expertise, we prioritize customer satisfaction by rigorously testing all products in-house and offering industry-leading warranties.