Denso 210-1100 Remanufactured Alternator

Produk Selesaiview

The Denso 210-1100 Remanufactured Alternator is a critical component of your vehicle's electrical system, responsible for generating electricity to power the vehicle's electrical components and recharge the battery. This remanufactured unit undergoes a rigorous testing process to ensure reliable performance and durability, meeting or exceeding original equipment (OE) standards.

Key aspects of its remanufacturing process include stators and rectifiers tested to 300 volts, rotors to 600 volts, and precise buffing of rotor slip rings to minimize brush wear. Bearings are validated to OE standards and loaded with premium OE-standard lubricants, ensuring a quality component designed for a "First Time Fit" and years of reliable service.

Pemasangan dan Persediaan

Installation of an automotive alternator requires mechanical knowledge and specific tools. It is highly recommended that installation be performed by a qualified automotive technician to ensure proper function and safety.

Langkah Keselamatan:

• Always disconnect the vehicle's battery negative terminal before beginning any work on the electrical system.
• Pastikan kenderaan disokong dengan kukuh pada penyangga bicu jika perlu mengangkat.
• Pakai peralatan pelindung diri yang sesuai, termasuk cermin mata keselamatan dan sarung tangan.
• Allow the engine to cool completely before working on engine bay components.

General Installation Steps (Consult Vehicle-Specific Repair Manual):

1. Locate and identify the existing alternator.
2. Remove the serpentine belt tension and remove the belt from the alternator pulley.
3. Disconnect all electrical connections from the alternator (battery cable, regulator wire).
4. Unbolt and remove the old alternator from its mounting brackets.
5. Install the new Denso 210-1100 alternator, ensuring all mounting bolts are tightened to manufacturer specifications.
6. Reconnect all electrical connections securely.
7. Reinstall the serpentine belt and adjust tension according to vehicle specifications.
8. Sambung semula terminal negatif bateri.
9. Start the vehicle and check for proper charging system operation (e.g., battery light off, voltage reading).

Prinsip Operasi

The Denso 210-1100 Remanufactured Alternator operates automatically once installed in the vehicle. Its primary function is to convert mechanical energy from the engine's rotating crankshaft (via the serpentine belt) into electrical energy. This electrical energy is then used to:

• Power all the vehicle's electrical systems (lights, radio, air conditioning, electronic control units, etc.) while the engine is running.
• Recharge the vehicle's 12-volt battery, which is used to start the engine and provide power when the engine is off.

A properly functioning alternator will maintain the vehicle's system voltage within a specified range (typically 13.5 to 14.8 volts) when the engine is running.

Penyelenggaraan

While the alternator itself is largely maintenance-free, its longevity and performance are directly affected by the health of related vehicle components. Consider the following for optimal performance:

• Kesihatan Bateri: Ensure your vehicle's battery is in good condition. A weak or failing battery can overwork the alternator, leading to premature failure.
• Serpentine Belt: Regularly inspect the serpentine belt for cracks, fraying, or excessive wear. Ensure it has proper tension. A loose or worn belt can cause the alternator to slip, reducing its output.
• Sambungan Elektrik: Periodically check the alternator's electrical connections for corrosion or looseness. Clean any corrosion and ensure connections are tight.
• Elakkan beban berlebihan: Minimize the use of excessive aftermarket electrical accessories that can draw more power than the alternator is designed to provide.

Menyelesaikan masalah

If you suspect an issue with your alternator, observe the following symptoms and consider these basic checks. Professional diagnosis is recommended for accurate assessment and repair.

Common Symptoms of Alternator Failure:

• Battery Warning Light: The most common indicator is a battery-shaped warning light illuminating on your dashboard.
• Lampu Pemadaman: Headlights, dashboard lights, or interior lights appear dim or flicker, especially at lower engine RPMs.
• Electrical Component Malfunctions: Power windows operate slowly, radio cuts out, or other electrical accessories behave erratically.
• Dead Battery: The battery repeatedly dies, even after being charged, indicating it's not being recharged by the alternator.
• Growling or Whining Noises: Unusual noises coming from the alternator area, potentially indicating worn bearings.
• Burning Rubber Smell: Could indicate a slipping serpentine belt.

Basic Checks (Perform with Caution):

• Pemeriksaan Visual: Check the serpentine belt for proper tension and condition. Ensure all electrical connections to the alternator are clean and tight.
• Bateri Voltage Ujian: With the engine off, a healthy battery should read around 12.6 volts. With the engine running, the voltage at the battery terminals should be between 13.5 and 14.8 volts. If it's significantly lower (e.g., below 13V) or much higher (e.g., above 15V), the alternator may be faulty.

If you experience any of these symptoms, it is advisable to have your vehicle's charging system professionally inspected.

Spesifikasi

Waranti dan Sokongan

This Denso 210-1100 Remanufactured Alternator is offered as an Amazon Renewed product. Amazon Renewed products are backed by the Amazon Renewed Guarantee.

Jaminan Diperbaharui Amazon: This product is eligible for a replacement or refund within 365 days of receipt if it does not work as expected. The return policy is managed by Amazon.

For support regarding this product, including warranty claims or technical assistance, please contact Amazon Customer Service or refer to the Amazon Renewed program details on the Amazon webtapak.

For general product information or technical specifications from the manufacturer, you may visit the official Denso webtapak.