pengenalan
This manual provides detailed instructions for the assembly, operation, and maintenance of your Tamiya Gun Blaster XTO Premium Mini 4WD kit. The Gun Blaster XTO Premium is a high-performance plastic model assembly kit featuring a shaft-drive four-wheel drive system and an FM-A chassis. It is inspired by the vehicle from the movie "Explosive Brothers Let's & Go!! WGP Raging Mini 4WD Chase." The model features a distinctive cowl design covering the front and rear tires, a streamlined cockpit, and an arched rear wing for aerodynamic stability. The body is molded in blue ABS plastic with black, yellow, and red graphic markings. Please read this manual thoroughly before beginning assembly to ensure correct construction and optimal performance.
Maklumat Keselamatan
- This product is a model kit and contains small parts. Keep out of reach of small children to prevent choking hazards.
- Assembly requires the use of hobby tools such as cutters, screwdrivers, and possibly knives. Exercise caution to avoid injury.
- Recommended age for assembly and use is 10 tahun dan ke atas. Adult supervision is recommended for younger users.
- Batteries (2 AA) are required and must be purchased separately. Always insert batteries with correct polarity (+/-). Do not mix old and new batteries, or different types of batteries. Remove batteries when the model is not in use for extended periods.
- Buang bateri secara bertanggungjawab mengikut peraturan tempatan.
Kandungan Pakej
Your Tamiya Gun Blaster XTO Premium kit includes the following components:
- Plastic parts for body, chassis (FM-A), and other components
- Motor
- Roda dan tayar
- Gears and shafts
- Stickers/Decals for markings
- Manual arahan (dokumen ini)
Items not included (required for assembly and operation):
- 2 bateri AA
- Hobby tools (e.g., plastic side cutters, small screwdriver, hobby knife)
Persediaan dan Perhimpunan
Follow the step-by-step diagrams provided in the included printed instruction sheet for detailed assembly. The general steps are outlined below:
- Sediakan Bahagian: Carefully cut all plastic parts from their sprues using plastic side cutters. Smooth any rough edges with a hobby knife or file.
- Pasang Casis: Begin by assembling the FM-A chassis components, including the motor mount, battery holder, and gear housing. Ensure all gears are properly aligned and lubricated as indicated in the diagrams.
- Install Motor: Insert the motor into its designated position within the chassis.
- Attach Axles and Wheels: Secure the axles, wheels, and tires. Ensure wheels spin freely.
- Susun Badan: Construct the main body shell, including the cowl and rear wing.
- Gunakan Pelekat: Carefully apply the provided stickers/decals to the body according to the reference images for the Gun Blaster XTO Premium.
- Attach Body to Chassis: Securely attach the completed body to the FM-A chassis.
Image: The fully assembled Tamiya Gun Blaster XTO Premium Mini 4WD, showcasing its blue body, red wheels, and distinctive flame graphics.
Double-check all connections and ensure no parts are loose before proceeding to operation.
Arahan Operasi
- Pemasangan Bateri: Open the battery compartment on the chassis. Insert two AA batteries, ensuring the positive (+) and negative (-) terminals match the markings inside the compartment. Close the compartment securely.
- Hidupkan kuasa: Locate the power switch on the chassis. Slide the switch to the "ON" position. The motor should begin to spin.
- penempatan: Place your Mini 4WD car on a flat, smooth surface or a designated Mini 4WD race track.
- Operasi: The car will move forward once powered on. There is no remote control; Mini 4WD cars are designed to run on tracks.
- Matikan: To stop the car, slide the power switch to the "OFF" position. Remove batteries if storing the car for an extended period.
Penyelenggaraan
- Pembersihan: Regularly clean dust and debris from the chassis, gears, and motor area using a soft brush or compressed air. Avoid using water or harsh chemicals.
- Gear Lubrication: Periodically apply a small amount of Tamiya gear grease (sold separately) to the moving gear parts to ensure smooth operation and reduce wear.
- Petak Bateri: Keep the battery compartment clean and dry. Check for any signs of corrosion.
- Kehausan Tayar: Inspect tires for wear and tear. Worn tires can affect performance. Replacement tires are available from Tamiya.
- Pemeriksaan Bahagian: Regularly check all screws and connections to ensure they are tight. Replace any damaged or worn parts promptly.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kereta tidak bergerak. |
|
|
| Kereta bergerak perlahan atau tidak konsisten. |
|
|
| Car makes unusual noises. |
|
|
Spesifikasi
| Nombor Model | 19451-000 |
| Jenis Casis | FM-A Chassis (Front Motor Aero) |
| Sistem Pemacu | Pemacu Aci 4WD |
| Dimensi Terpasang (Lebih kurang) | Length: 6.1 inches (156 mm), Width: 3.8 inches (97 mm), Height: 1.5 inches (37 mm) |
| Berat Barang | 7 auns (lebih kurang 198g) |
| Sumber Kuasa | 2 bateri AA (tidak termasuk) |
| Umur Disyorkan | 10 tahun dan ke atas |
| bahan | ABS Plastic (Body), other plastic and metal components |
Waranti dan Sokongan
For specific warranty information regarding your Tamiya Gun Blaster XTO Premium Mini 4WD kit, please refer to the documentation included in the product packaging or visit the official Tamiya website. Tamiya products are known for their quality, and support for parts and technical assistance can typically be found through authorized dealers or the manufacturer's customer service channels.
If you encounter issues not covered in this manual, please contact Tamiya customer support or your local hobby shop for assistance.
