eBikeling Pedal Assist Sensor (PAS) User Manual

pengenalan

The eBikeling Pedal Assist Sensor (PAS) is designed to seamlessly integrate with your electric bicycle, providing efficient and eco-friendly pedal assistance. This accessory transforms your conventional bike into a high-performance e-bike by activating the motor based on your pedaling input. It is universally compatible with most electric bikes and is crafted from high-quality, durable materials to ensure reliable operation and resistance to impacts and dust.

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your eBikeling PAS.

Kandungan Pakej

eBikeling PAS sensor components laid out

Image: All components of the eBikeling Pedal Assist Sensor kit, including the sensor unit, the magnetic disc (split into two halves), and zip ties for installation.

Pedal Assist Sensor (PAS) Unit
Magnetic Disc (split for easy installation)
Mounting Zip Ties
Metal Ring (for securing the magnetic disc)

Persediaan dan Pemasangan

The eBikeling PAS is designed for easy installation. Follow these steps carefully to ensure proper function.

Prepare Your Bicycle: Ensure your bicycle is stable, preferably on a stand. You may need to remove the left crank arm to install the magnetic disc.
Install the Magnetic Disc:
Image: The magnetic disc and the sensor unit, showing how they interact. The disc has multiple magnets embedded.

The magnetic disc is split into two halves for convenient installation without removing the bottom bracket. Place the two halves of the magnetic disc around the bicycle's bottom bracket spindle, ensuring the magnets face outwards towards where the sensor will be mounted. Secure the two halves together using the provided metal ring or by snapping them firmly into place if designed to do so.
Mount the PAS Sensor Unit:
Image: The eBikeling PAS sensor unit mounted on the bicycle frame, adjacent to the magnetic disc on the crank arm.
Position the PAS sensor unit on the bicycle frame, typically near the bottom bracket, so that it is in close proximity to the magnetic disc. The sensor should be aligned with the magnets on the disc, allowing for accurate detection of pedal rotation. Use the provided zip ties to securely fasten the sensor unit to the frame. Ensure the sensor is stable and does not interfere with pedaling or chain movement.
Sambungkan Pendawaian:
Imej: A terperinci view of the PAS sensor's cable and its waterproof connector, ready for connection to the e-bike controller.
Locate the PAS input port on your e-bike controller. Connect the cable from the eBikeling PAS sensor unit to this port. Ensure the connection is firm and secure. Most eBikeling kits use waterproof connectors; align the pins correctly before pushing them together. Route the cable neatly along the frame, securing it with additional zip ties if necessary, to prevent snagging or damage.
Uji Pemasangan: After installation, manually rotate the pedals to ensure the magnetic disc spins freely and the sensor detects the rotation. If your e-bike display shows a PAS level or motor activation, the installation is successful.

Arahan Operasi

The eBikeling PAS works by detecting your pedaling motion and signaling the e-bike controller to provide motor assistance. Here’s how to operate your e-bike with the PAS installed:

Pengaktifan: The PAS system typically activates automatically when you begin pedaling forward. There is no on/off switch directly on the sensor itself.
Pedal Assistance Levels: Your e-bike's display or control panel will allow you to select different levels of pedal assistance (e.g., 1-5). Higher levels provide more motor power for less pedaling effort.
Penyahaktifan: The motor assistance will typically cease when you stop pedaling, apply the brakes, or reach the maximum assisted speed set by your e-bike system. You can also deactivate assistance via your e-bike's display buttons.
Operasi lancar: For the smoothest experience, pedal consistently. The PAS sensor provides feedback from the pedals to the controller, which then assists with electric power based on the selected level.

Penyelenggaraan

The eBikeling PAS sensor is designed to be durable and low-maintenance. However, regular checks can prolong its lifespan and ensure optimal performance.

Jaga kebersihan: Periodically wipe down the sensor unit and magnetic disc to remove dirt, dust, and debris. While designed to resist dust buildup, excessive grime can interfere with sensor readings.
Semak Sambungan: Ensure all cable connections are secure and free from corrosion. Loose connections can lead to intermittent or no pedal assistance.
Periksa Kerosakan: Regularly check the sensor unit, magnetic disc, and cables for any signs of physical damage, cracks, or fraying. Replace any damaged components immediately.
Penjajaran Sensor: Verify that the sensor unit remains properly aligned with the magnetic disc. If it shifts, gently reposition it and re-secure the zip ties.

Menyelesaikan masalah

If you encounter issues with your eBikeling PAS, refer to the following common problems and solutions:

Masalah	Kemungkinan Punca	Penyelesaian
No pedal assist / PAS not working	Kabel longgar atau terputus Sensor misaligned or too far from magnetic disc Damaged sensor or magnetic disc Controller issue (less likely for PAS specific problem)	Check all cable connections, ensure they are fully seated. Verify sensor alignment and proximity to the magnetic disc (typically 1-3mm gap). Inspect sensor and disc for visible damage. If damaged, replacement may be necessary. Ensure e-bike system is powered on and not in an error state.
Intermittent pedal assist	Sambungan longgar Sensor slightly misaligned Debris on sensor or magnetic disc	Lindungi semua sambungan. Re-align the sensor for optimal detection. Clean the sensor and magnetic disc thoroughly.
Motor continues to assist after stopping pedaling	Sensor issue (rare) Controller setting (check e-bike manual)	Ensure the sensor is not obstructed and is clean. Consult your e-bike's main user manual for controller settings related to PAS delay or cutoff.

Spesifikasi

Nama Model: A-PAS
Nombor Bahagian: A-EZPAS_CB
Jenama: EBIKELING
Bahan: plastik
Berat Barang: 0.07 Kilogram
Dimensi Pakej: 4.49 x 3.46 x 1.14 inci
Keserasian: Universal with most pedal-assisted electric bicycle drive systems
Assist Ratio: 1:1 power assist
Reka bentuk: Compact, lightweight, durable, impact-resistant, dust-resistant

Waranti dan Sokongan

The eBikeling Pedal Assist Sensor (PAS) comes with a Waranti 2 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or improper installation.

For technical support, warranty claims, or any questions regarding your eBikeling product, please contact EBIKELING customer service. You can find more information and contact details on the official EBIKELING store page: EBIKELING Store on Amazon.

	Manual Pengguna Paparan LCD eBikeling S830 Manual pengguna untuk paparan LCD eBikeling S830, meliputi fungsi, parameter dan operasi utamanya untuk basikal elektrik.
	Manual Pengguna Paparan Basikal Elektrik Ebikeling NC-81F Manual pengguna yang komprehensif untuk Paparan Basikal Elektrik Ebikeling NC-81F, memperincikan spesifikasi, fungsi, operasi, tetapan diperibadikan, waranti dan langkah berjaga-jaga.
	Electric Bike Company Operator's Manual: Comprehensive Guide to Your EBC eBike Essential operator's manual for Electric Bike Company (EBC) e-bikes, covering safety, operation, maintenance, battery care, troubleshooting, and warranty. Learn to maximize your riding experience with your EBC electric bicycle.
	NAKTO ELECTRIC BCYCLE LCD Display Control Panel Arahan Manual arahan untuk panel kawalan paparan LCD NAKTO ELECTRIC BICYCLE, model 861-A. Meliputi tanda paparan, tetapan dan fungsi butang untuk basikal elektrik.

EBIKELING A-EZPAS_CB