Manual Pengguna Inverter Gelombang Sinus Powertech 500W (Puncak 1500W) 12VDC hingga 240VAC Diubah Suai

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Powertech 500W (1500W Peak) Modified Sinewave Inverter. This device converts 12V DC power from a battery into 240V AC power, suitable for operating various small to medium electronic devices and appliances. Please read this manual thoroughly before use and retain it for future reference.

2. Arahan Keselamatan

WARNING: Failure to follow these safety instructions may result in electric shock, fire, serious injury, or damage to the inverter or connected devices.

• Ensure the inverter is connected to a 12V DC power source only. Connecting to other voltages boleh menyebabkan kerosakan.
• Always connect the inverter to the battery using the supplied leads with alligator clips. Ensure correct polarity: positive (+) to positive, negative (-) to negative. Reverse polarity will damage the unit.
• Do not exceed the inverter's continuous power rating of 500W. While it supports a 1500W surge for startup, prolonged operation above 500W can cause overheating and damage.
• Keep the inverter in a well-ventilated area. Do not block ventilation openings.
• Avoid exposing the inverter to moisture, rain, or extreme temperatures.
• Jangan buka penyongsang casing. Tiada bahagian yang boleh diservis pengguna di dalamnya.
• Putuskan sambungan inverter daripada bateri sebelum melakukan sebarang penyelenggaraan atau pembersihan.
• Keep children away from the inverter and connected devices.

3. Produk Lebihview

Familiarize yourself with the components of your Powertech Modified Sinewave Inverter:

Rajah 3.1: Secara keseluruhan view of the Powertech 500W Modified Sinewave Inverter, showing the front panel with AC outlet, USB port, power switch, and indicator lights, and the rear panel with battery terminals.

3.1 Panel Depan

Figure 3.2: Close-up of the inverter's front panel.

• Power/Fault Indicators: Green light indicates normal operation; Red light indicates a fault (e.g., overload, low battery).
• Suis ON / OFF: Toggles the inverter's power.
• Port USB: Provides 5V DC power for charging USB-compatible devices.
• Alur keluar AC 240V: Standard mains outlet for connecting AC-powered devices.

3.2 Panel Belakang

Figure 3.3: Close-up of the inverter's rear panel, showing battery terminals and warning label.

• Battery Terminals (+ and -): Connect to a 12V DC battery using the supplied alligator clips.
• Ventilasi penyejukan: Ensure these are unobstructed for proper heat dissipation.

4. Persediaan

Follow these steps to set up your inverter:

1. Sediakan Bateri: Ensure your 12V DC battery is fully charged and in a well-ventilated area.
2. Sambung ke Bateri:
   • Ensure the inverter's ON/OFF switch is in the "OFF" position.
   • Connect the red alligator clip lead to the positive (+) terminal of the inverter and then to the positive (+) terminal of the battery.
   • Connect the black alligator clip lead to the negative (-) terminal of the inverter and then to the negative (-) terminal of the battery.
   • IMPORTANT: Double-check polarity before making connections. Reverse polarity will cause severe damage.
3. Letakkan Inverter: Place the inverter on a stable, flat surface, ensuring adequate ventilation around the unit. Keep it away from direct sunlight, heat sources, and flammable materials.

5. Arahan Operasi

Once the inverter is properly set up, you can begin operation:

1. Hidupkan kuasa: Flip the ON/OFF switch on the front panel to the "ON" position. The green Power indicator light should illuminate, indicating the inverter is operational.
2. Sambungkan Peranti AC: Plug your 240V AC devices into the AC outlet on the front panel. Ensure the total continuous power draw of your devices does not exceed 500W. For devices with high startup current (e.g., motors), the inverter can handle up to 1500W surge for a brief period.
3. Gunakan Port USB: Plug your USB-compatible devices into the USB port for charging.
4. Penunjuk Monitor:
   • Lampu Hijau: Operasi biasa.
   • Lampu Merah: Indicates a fault condition (e.g., overload, low battery, overheating). The inverter will typically shut down automatically in such cases to protect itself and the battery.
5. Matikan: When finished, first disconnect all devices from the inverter, then flip the ON/OFF switch to the "OFF" position. Finally, disconnect the inverter from the battery.

6. Penyelenggaraan

Proper maintenance ensures the longevity and reliable performance of your inverter:

• Pembersihan: Bersihkan bahagian luar inverter secara berkala dengan kain kering dan lembut. Jangan gunakan pembersih cecair atau pelarut.
• Pengudaraan: Regularly check that the cooling vents are free from dust and debris to ensure proper airflow. Blocked vents can lead to overheating.
• Storan: When not in use for extended periods, store the inverter in a cool, dry place, away from direct sunlight and extreme temperatures (-30°C to 70°C). Ensure it is disconnected from the battery.
• Penjagaan Bateri: Maintain your 12V battery according to its manufacturer's instructions. A well-maintained battery is crucial for inverter performance.

7. Penyelesaian masalah

Jika anda menghadapi masalah dengan inverter anda, rujuk jadual di bawah untuk masalah dan penyelesaian biasa:

8. Spesifikasi

Technical specifications for the Powertech 500W (1500W Peak) Modified Sinewave Inverter:

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.