1. Pengenalan
The LAUNCH CRP239 is an intelligent and networkable automotive diagnostic tool designed for passenger cars. It offers comprehensive OBD II full functionality and rapid testing capabilities for four major vehicle systems: Engine, Automatic Transmission (A/T), Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS). Additionally, the CRP239 includes advanced reset functions such as Oil Reset, Steering Angle Reset, Brake-Pad Reset, Battery Matching, Throttle Adaptation, and Diesel Particulate Filter (DPF) Regeneration, catering to the needs of professional technicians and DIY enthusiasts.
2. Maklumat Keselamatan
Always observe the following safety precautions when operating the LAUNCH CRP239:
- Pastikan penyalaan kenderaan dimatikan sebelum menyambungkan atau memutuskan sambungan alat diagnostik.
- Jangan kendalikan alat dalam keadaan basah atau berhampiran cecair atau gas yang mudah terbakar.
- Pakai peralatan pelindung diri yang sesuai, seperti cermin mata keselamatan, semasa bekerja di atas kenderaan.
- Refer to the vehicle's service manual for specific diagnostic procedures and safety warnings.
- Keep the tool away from strong magnetic fields.
- Only use the provided cables and accessories.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- LAUNCH CRP239 Main Unit
- Kabel Diagnostik OBD II
- Kabel USB
- Manual Pengguna
- Membawa Sarung
Figure 3.1: Contents of the LAUNCH CRP239 package, showing the diagnostic tool, cables, and storage case.
4. Produk Lebihview
The LAUNCH CRP239 features a robust design with a 5.0-inch 720p touch screen for intuitive navigation. It includes physical buttons for common operations and a durable rubber exterior for protection.
Rajah 4.1: Depan view of the LAUNCH CRP239, highlighting the touch screen display and navigation buttons.
4.1. Komponen
- Skrin Sentuh 5.0-inci: High-resolution display for clear data presentation and touch input.
- Butang Navigasi: Directional pad, OK button, and Return button for menu navigation.
- OBD II Connector: Penyambung 16-pin standard untuk komunikasi kenderaan.
- Port USB: For connecting to a computer for updates or data transfer.
- Penunjuk Kuasa: LED light indicating power status.
5. Persediaan
Follow these steps for initial setup of your LAUNCH CRP239:
- Cas Peranti: Connect the CRP239 to a power source using the provided USB cable to ensure the internal 4000mAh lithium-polymer battery is fully charged before first use.
- Hidupkan kuasa: Tekan dan tahan butang kuasa untuk menghidupkan peranti.
- Pemilihan Bahasa: On the initial setup screen, select your preferred language. The device supports multilingual operation.
- Sambungan Wi-Fi: Navigate to the 'Settings' menu and select 'Wi-Fi'. Connect to an available wireless network to enable online updates and diagnostic report sharing.
- Kemas Kini Perisian: It is recommended to perform a software update immediately after connecting to Wi-Fi to ensure you have the latest features and vehicle coverage. Navigate to the 'Update' section and follow the on-screen prompts.
Figure 5.1: The LAUNCH CRP239 with its diagnostic cable connected, ready for vehicle communication.
6. Arahan Operasi
The LAUNCH CRP239 provides a comprehensive suite of diagnostic functions. Below are instructions for common operations.
6.1. Menyambung ke Kenderaan
- Locate the vehicle's 16-pin OBD II diagnostic port (usually under the dashboard).
- Pastikan penyalaan kenderaan dalam keadaan MATI.
- Connect the OBD II diagnostic cable to the vehicle's OBD II port and to the CRP239.
- Turn the vehicle's ignition to the ON position (engine off). The CRP239 will power on automatically.
6.2. Navigasi Menu Utama
From the main menu, you can access various functions:
Figure 6.1: The main menu interface of the LAUNCH CRP239, providing access to all primary functions.
- Diagnosis: For full system diagnostics (Engine, A/T, ABS, SRS).
- Saya/P: Readiness status for emissions.
- OBD II: Standard OBD II functions (read/clear DTCs, live data, freeze frame, O2 sensor test, etc.).
- Tetapkan semula: Access various maintenance reset functions.
- Bateri Voltage: Memaparkan volum bateri kenderaan masa nyatatage.
- Kemas kini: For software and firmware updates via Wi-Fi.
- Data: Review saved diagnostic data and reports.
- tetapan: Configure device settings such as language, Wi-Fi, and display.
6.3. Menjalankan Imbasan Diagnostik
- Daripada menu utama, pilih "Diagnosis".
- The tool will attempt to automatically identify the vehicle via VIN scan. If unsuccessful, you may need to manually select the vehicle make, model, and year.
- Choose the system you wish to diagnose (e.g., Engine, Transmission, ABS, SRS).
- Pilih "Read Fault Codes" kepada view Kod Masalah Diagnostik (DTC).
- Pilih "Clear Fault Codes" to erase DTCs after repairs have been made. Caution: Clearing codes without addressing the underlying issue will result in the codes reappearing.
- Pilih "Read Data Stream" kepada view live sensor data.
6.4. Using Reset Functions
The CRP239 supports several common maintenance reset functions:
- Set Semula Minyak: Menetapkan semula peringatan hayat minyak selepas penukaran minyak.
- Tetapan Semula Sudut Stereng: Resets the steering angle sensor after alignment or component replacement.
- Brake-Pad Reset (EPB): Menetapkan semula sistem brek parkir elektronik selepas penggantian pad brek.
- Battery Matching (BMS): Mendaftarkan bateri baharu dengan Sistem Pengurusan Bateri kenderaan.
- Penyesuaian Pendikit: Mempelajari semula kedudukan badan pendikit selepas pembersihan atau penggantian.
- Penjanaan Semula DPF: Memulakan proses penjanaan semula Penapis Zarah Diesel.
To use a reset function, select "Reset" from the main menu, then choose the desired function and follow the on-screen instructions.
6.5. Kemas Kini Perisian
The CRP239 supports one-click Wi-Fi updates for software and vehicle coverage, ensuring you always have the latest diagnostic capabilities.
- Pastikan peranti disambungkan ke rangkaian Wi-Fi yang stabil.
- Daripada menu utama, pilih "Kemas kini".
- The device will check for available updates. Select the updates you wish to install and confirm.
- Allow the update process to complete without interruption. The device may restart during this process.
Figure 6.2: The update screen on the LAUNCH CRP239, showing available software updates for various vehicle brands.
6.6. Penjanaan Laporan Diagnostik
The CRP239 can automatically generate diagnostic reports, which can be shared via email.
- After completing a diagnostic session, the tool will prompt you to generate a report.
- Confirm to generate the report.
- Navigasi ke "Data" menu ke view saved reports.
- Select a report and choose the option to share via email. Ensure your Wi-Fi is connected and email settings are configured in the 'Settings' menu.
7. Penyelenggaraan
Proper maintenance ensures the longevity and optimal performance of your LAUNCH CRP239:
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkan peranti. Jangan gunakan pembersih atau pelarut yang melelas.
- Storan: Store the device in its carrying case in a cool, dry place when not in use. Avoid extreme temperatures.
- Penjagaan Bateri: Charge the battery regularly, even if the device is not in frequent use, to maintain battery health. Avoid fully discharging the battery for extended periods.
- Pemeriksaan Kabel: Periodically inspect the diagnostic and USB cables for any signs of damage. Replace damaged cables immediately.
8. Penyelesaian masalah
This section addresses common issues you might encounter with the LAUNCH CRP239.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peranti tidak dihidupkan. | Low battery; faulty connection to vehicle. | Charge the device fully. Ensure the OBD II cable is securely connected to both the CRP239 and the vehicle. Check vehicle's ignition is ON. |
| Tidak dapat berkomunikasi dengan kenderaan. | Incorrect vehicle protocol; faulty OBD II port; damaged cable. | Verify vehicle compatibility. Check the vehicle's OBD II port for power. Try a different vehicle or cable if available. Ensure vehicle ignition is ON. |
| Kemas kini perisian gagal. | Sambungan Wi-Fi yang tidak stabil; simpanan tidak mencukupi. | Ensure a strong and stable Wi-Fi connection. Check available storage space on the device. Restart the update process. |
| Skrin tidak bertindak balas. | Gangguan perisian; kerosakan fizikal. | Perform a soft reset by holding the power button until the device restarts. If the issue persists, contact customer support. |
9. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | CRP239 (CREADER PROFESSIONAL 239) |
| Paparan | 5.0-inch 720p Touch Screen |
| Bateri | Polimer Litium Boleh Dicas Semula 4000mAh (termasuk) |
| Ketersambungan | OBD II, Wi-Fi, USB |
| Liputan Kenderaan | Domestic, Asian, European vehicles (1996 and newer OBD2) |
| Sistem yang Disokong | Engine, Automatic Transmission (A/T), ABS, SRS |
| Fungsi Khas | Oil Reset, Steering Angle Reset, Brake-Pad Reset (EPB), Battery Matching (BMS), Throttle Adaptation, DPF Regeneration |
| Dimensi | 32.4 x 25.4 x 8 cm (Pakej) |
| Berat Barang | 560 g |
| Bahan Luaran | Getah |
10. Maklumat Waranti
The LAUNCH CRP239 comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product package or visit the official Launch webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
Pilihan jaminan lanjutan mungkin tersedia daripada pembekal pihak ketiga. Untuk example, 1-Year and 2-Year Extended Warranties by Salama Care are offered for this product.
11. Sokongan
For technical assistance, product inquiries, or support, please contact Launch customer service through their official website or the contact information provided in your product documentation. Ensure you have your product model number (CRP239) and serial number ready when contacting support.
Untuk sumber tambahan, lawati Launch Official Webtapak.
