pengenalan
This manual provides essential information for the safe and effective use of your Luceco LED Inspection Head Torch. Please read these instructions carefully before operating the device and retain them for future reference. This head torch is designed for various applications, including professional inspection, DIY tasks, camping, and other outdoor activities, offering versatile lighting modes and hands-free operation.
Rajah 1: Depan view of the Luceco LED Inspection Head Torch.
Produk Selesaiview
The Luceco LED Inspection Head Torch is a versatile and durable lighting solution. Key features include:
- 5 Mod Pencahayaan: Includes 100% output, 50% output, flash mode, red light, and red flash mode.
- Sensor Gerakan PIR: For hands-free operation, allowing activation and deactivation with a wave of the hand.
- Kecondongan boleh laras: The torch head can be tilted up to 60 degrees to direct light precisely where needed.
- Bateri boleh dicas semula: Integrated lithium polymer battery, conveniently charged via USB Type-C.
- Pembinaan Tahan Lama: Lightweight ABS body with an IK04 rating, designed to withstand tough environments.
- Destar boleh laras: Elastic headband ensures a comfortable and secure fit for various head sizes.
Persediaan
1. Pengecasan Awal
Before first use, fully charge the head torch. Connect the provided USB Type-C cable to the charging port on the head torch and plug the other end into a compatible USB power source (e.g., computer, USB wall adapter). The charging indicator light will show the charging status. A full charge typically takes approximately 2.5 hours.
Figure 2: USB Type-C charging port for convenient recharging.
2. Melaraskan Ikat Kepala
Place the head torch on your head. Adjust the elastic headband by sliding the buckles on either side until it fits snugly and comfortably. Ensure the torch unit is centered on your forehead.
Figure 3: The adjustable headband ensures a comfortable and secure fit.
Arahan Operasi
1. Menghidupkan/Mematikan dan Pemilihan Mod
Locate the power button on the top of the head torch. Press the button to cycle through the following lighting modes:
- Akhbar Pertama: 100% Light Output (150lm)
- Akhbar Kedua: 50% Light Output
- Akhbar Ketiga: Mod Kilat
- Akhbar Keempat: Lampu Merah
- Akhbar Kelima: Mod Denyar Merah
- Sixth Press: Mati
To turn off the torch from any mode, press and hold the power button for approximately 2 seconds.
Figure 4: The head torch offers five versatile lighting modes.
2. PIR Motion Sensing Function
The head torch features a PIR motion sensor for hands-free control. To activate this function, press the dedicated motion sensor button (usually located near the power button). Once activated, you can turn the light on or off by waving your hand in front of the sensor.
3. Tilting the Torch Head
The torch head can be manually tilted up or down to adjust the beam angle. Gently push the torch unit to achieve the desired angle, up to 60 degrees. This allows you to focus light on specific areas without repositioning the entire head torch.
Figure 5: The torch head can be tilted for precise light direction.
Penyelenggaraan
1. Pembersihan
To clean the head torch, wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure the charging port cover is securely closed before cleaning to prevent water ingress.
2. Penjagaan Bateri
The integrated lithium polymer battery is designed for long life. To maximize battery longevity:
- Recharge the battery when the light output becomes noticeably dim.
- Elakkan menyahcas sepenuhnya bateri dengan kerap.
- If storing the head torch for an extended period, charge it to approximately 50% every 3-6 months.
3. Penyimpanan
Store the head torch in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from corrosive materials and out of reach of children.
Menyelesaikan masalah
If you encounter issues with your Luceco LED Inspection Head Torch, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu suluh tidak menyala. | Bateri habis. | Charge the head torch fully using the provided USB cable. |
| Cahaya malap atau berkelip. | Tahap bateri rendah. | Cas semula bateri. |
| Obor tidak dicas. | Faulty USB cable or power source; charging port obstruction. | Try a different USB cable or power source. Check the charging port for debris and clean if necessary. |
| Sensor gerakan tidak bertindak balas. | Sensor not activated; obstruction in front of sensor. | Ensure the motion sensor function is activated (press the dedicated button). Clear any obstructions from the sensor area. |
If the problem persists after attempting these solutions, please contact Luceco customer support.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | LILH15P65-01 |
| Jenis Sumber Cahaya | LED |
| Wattage | 3 Watt |
| Fluks Bercahaya | 150 Lumen |
| Suhu Warna | 6500K (Putih Sejuk) |
| Jarak Pancaran | Sehingga 150m |
| Jenis Bateri | Polimer Litium (termasuk) |
| Masa Mengecas | lebih kurang 2.5 jam |
| Hayat Bateri (Maks) | Up to 20 hours (depending on use) |
| Kehidupan LED | 25,000 jam |
| bahan | ABS (body), Aluminum (internal components) |
| warna | Hitam / hijau |
| Dimensi Produk | 2.7 x 10.6 x 13.1 cm |
| Berat Barang | 80 g |
| Ingress Protection (IK Rating) | IK04 |
Waranti & Sokongan
The Luceco LED Inspection Head Torch comes with a Waranti pengilang selama 1 tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the dedicated Luceco technical support team. Please have your product model number (LILH15P65-01) and proof of purchase ready when contacting support.
