Manual Pengguna Deadbolt Elektronik Nikel Satin Tanpa Cacat

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Overstock Faultless Satin Nickel Electronic Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Maklumat Keselamatan

Always follow basic safety precautions when installing and operating electronic devices. Failure to do so may result in injury or damage to the product.

• Do not expose the deadbolt to extreme temperatures or moisture.
• Use only the specified battery type (4 AA batteries, not included).
• Jauhkan daripada kanak-kanak.
• Ensure proper alignment during installation to prevent mechanical stress.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan.

• Electronic Deadbolt Assembly (Exterior Keypad and Interior Unit)
• Perkakasan Pemasangan (Skru, Bolt)
• Pukulan Pukulan
• Kekunci (untuk penggantian manual)
• Templat Pemasangan

Imej 1: Depan view of the Faultless Satin Nickel Electronic Deadbolt, showing the keypad and keyhole. This image displays the sleek satin nickel finish and the numerical keypad for code entry, along with the traditional key cylinder for manual access.

4. Persediaan dan Pemasangan

Follow these steps carefully for proper installation.

4.1 Penyediaan Pintu

1. Ensure your door meets the required thickness and backset specifications.
2. Use the provided template to mark and drill holes if necessary.

4.2 Memasang Deadbolt

1. Insert the deadbolt latch into the door edge.
2. Install the exterior keypad assembly, ensuring the cable passes through the door.
3. Sambungkan kabel ke unit dalaman.
4. Secure the interior unit to the door using the provided screws.
5. Install 4 AA batteries into the battery compartment of the interior unit.
6. Test the deadbolt operation with the key and manually.

5. Arahan Operasi

5.1 Pengaturcaraan Awal

Upon first power-up, the deadbolt will be in factory default mode. You must set a master code first.

1. Press the "Program" button on the interior unit.
2. Enter a new 4-8 digit master code.
3. Press the "Lock" button to confirm.

5.2 Adding User Codes

Up to 10 user codes can be programmed.

1. Tekan butang "Program".
2. Masukkan kod induk.
3. Press the "Program" button again.
4. Masukkan kod pengguna 4-8 digit baharu.
5. Press the "Lock" button to confirm.

5.3 Mengunci dan Membuka Kunci

• Untuk Membuka Kunci: Enter a valid user code or master code on the keypad, then press the "Lock" button. The deadbolt will retract.
• Untuk mengunci: Press the "Lock" button on the keypad or turn the thumb-turn on the interior unit. The deadbolt will extend.
• Pembatalan Manual: Use the provided physical key to lock or unlock the deadbolt at any time.

6. Penyelenggaraan

Regular maintenance ensures the longevity and proper function of your electronic deadbolt.

• Penggantian Bateri: Replace batteries when the low battery indicator illuminates or when the deadbolt becomes unresponsive. Always use new AA alkaline batteries.
• Pembersihan: Clean the exterior keypad with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Pelinciran: Periodically lubricate the deadbolt latch mechanism with a silicone-based lubricant to ensure smooth operation.

7. Penyelesaian masalah

Rujuk bahagian ini untuk isu biasa dan penyelesaiannya.

8. Spesifikasi

• model: Tidak bercela
• Selesai: Satin Nickel
• Bahan: Nickel, Metal
• Sumber Kuasa: 4 Bateri AA (tidak termasuk)
• Master Code Capacity: 1
• User Code Capacity: Sehingga 10
• Jenis Kunci: Electronic Deadbolt with Key Override
• Penggunaan yang Disyorkan: Residential doors

9. Waranti dan Sokongan

For warranty information or technical support, please contact Overstock customer service. Keep your purchase receipt as proof of purchase.

Maklumat Hubungan: Refer to the Overstock official website or your purchase documentation for the most current support contact details.