pengenalan
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lockset.
Maklumat Keselamatan
- Sentiasa pakai peralatan keselamatan yang sesuai, seperti sarung tangan dan pelindung mata, semasa pemasangan.
- Pastikan semua komponen diikat dengan selamat sebelum digunakan.
- Do not use excessive force when operating the lockset.
- Keep keys in a safe and accessible location, separate from the door.
Kandungan Pakej
Pakej anda harus mengandungi item berikut:
- 2 x Keyed Entry Ball Knobs
- 2 x Single Cylinder Deadbolts
- 4 x KW1 Keys
- Adjustable Latches (for both knob and deadbolt)
- Strike Plates
- Skru Pemasangan
- Templat Pemasangan (jika disertakan)
Image: All components of the Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt set, including two knobs and two deadbolts with their respective latches and strike plates.
Persediaan dan Pemasangan
Alat yang Diperlukan:
- Pemutar Skru Kepala Phillips
- Pita Pengukur
- Pensel
- Gerudi (jika penyediaan pintu baharu diperlukan)
- Wood Chisel (if new door preparation is needed)
Langkah Pemasangan:
- Sediakan Pintu: Ensure your door has the correct bore holes (typically 2-1/8 inches for the lock body and 1 inch for the latch) and backset (2-3/8 inches or 2-3/4 inches). Use the provided template if drilling new holes.
- Pasang Selak: Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with two small screws. Adjust the backset if necessary by twisting the latch mechanism.
- Install the Exterior Knob/Deadbolt: Place the exterior portion of the knob/deadbolt through the large bore hole, ensuring the spindle or tailpiece aligns with the latch mechanism.
- Install the Interior Knob/Deadbolt: Position the interior portion of the knob/deadbolt, aligning it with the exterior portion and the latch. Secure with the long mounting screws provided, tightening evenly.
- Pasang Plat Strike: Mark the position of the latch bolt on the door frame. Chisel out a shallow recess for the strike plate and secure it with screws. Ensure the latch bolt engages smoothly.
- Operasi Ujian: Close the door and test the knob and deadbolt with the key from both inside and outside to ensure smooth operation.
Arahan Operasi
Keyed Entry Knob:
- Untuk Mengunci dari Luar: Insert the key and turn it to lock the knob. Remove the key.
- Untuk Membuka Kunci dari Luar: Insert the key and turn it to unlock the knob.
- Untuk Mengunci dari Dalam: Press or turn the button/thumbturn on the interior knob.
- Untuk Membuka Kunci dari Dalam: Turn the interior knob or button/thumbturn.
Single Cylinder Deadbolt:
- Untuk Mengunci dari Luar: Insert the key and turn it to extend the deadbolt. Remove the key.
- Untuk Membuka Kunci dari Luar: Insert the key and turn it to retract the deadbolt.
- Untuk Mengunci dari Dalam: Turn the thumbturn on the interior side to extend the deadbolt.
- Untuk Membuka Kunci dari Dalam: Turn the thumbturn on the interior side to retract the deadbolt.
Penyelenggaraan
- Pembersihan: Bersihkan set kunci secara berkala dengan kain lembutamp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the satin stainless steel finish.
- Pelinciran: Sapukan sedikit pelincir grafit atau semburan berasaskan silikon secara berkala pada mekanisme laluan kunci dan selak untuk memastikan operasi yang lancar. Jangan gunakan pelincir berasaskan minyak kerana ia boleh menarik kotoran.
- Keketatan skru: Check and tighten all mounting screws periodically to ensure the lockset remains securely attached to the door.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kunci tidak berpusing atau kaku. | Kotoran pada laluan kunci, kunci haus atau silinder yang tidak sejajar. | Clean keyway with graphite lubricant. Try a spare key. Check for proper cylinder alignment. |
| Latch bolt does not retract/extend fully. | Misaligned latch, bent components, or debris. | Check latch alignment and screw tightness. Clear any obstructions. Lubricate the latch mechanism. |
| Door does not close properly with lock engaged. | Misaligned strike plate or door frame issues. | Adjust the strike plate position. Inspect the door frame for warping or damage. |
| Knob/Deadbolt feels loose. | Skru pemasangan longgar. | Tighten the mounting screws evenly. Do not overtighten. |
Spesifikasi
- Jenis Produk: Keyed Entry Knob and Single Cylinder Deadbolt
- model: B36L1BD
- Bahan: Keluli Tahan Karat, Logam
- Selesai: Keluli Tahan Karat Satin
- Gred: 3 Grade (Residential)
- Penyerahan Pintu: Tangan Kanan
- Set Belakang Boleh Laras: 2-3/8 inci (60mm) atau 2-3/4 inci (70mm)
- Julat Ketebalan Pintu: 1-3/8 inches (35mm) to 1-3/4 inches (44mm)
- laluan kunci: KW1
- Keys Included: 4
- Dimensi Produk: Kira-kira 3.3 x 12.4 x 9.8 inci (8.4 x 31.5 x 24.9 cm)
- Penggunaan Dalaman/Luar: Luar
Waranti dan Sokongan
For warranty information, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Specific warranty terms may vary.
For technical support or further assistance, please contact the customer service department of your retailer or the manufacturer, Overstock.
