1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Everbilt 1/3 HP Submersible Aluminum Sump Pump, Model HDPS33W. Please read all instructions carefully before use to ensure proper function and to prevent injury or damage.
2. Maklumat Keselamatan
WARNING: Risk of Electric Shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
- Always disconnect power to the pump before handling, servicing, or performing any maintenance.
- Jangan kendalikan pam jika kord kuasa atau palam rosak.
- Ensure the electrical circuit is protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not use the pump in applications involving flammable or explosive liquids.
- Wear appropriate personal protective equipment, such as safety glasses, during installation and maintenance.
- This pump is designed for clear water only. Do not use for sewage or other hazardous liquids.
3. Produk Lebihview
The Everbilt 1/3 HP Submersible Sump Pump is designed for efficient water removal from residential sump basins. It features a durable aluminum motor housing for effective heat dissipation and a tethered float switch for automatic operation. The pump is capable of handling 3/8 inch solids.
4. Persediaan dan Pemasangan
4.1 Senarai Semak Pra-Pemasangan
Before beginning installation, ensure you have the following items (some sold separately):
- Gogal Keselamatan
- Screwdrivers (Phillips & Flat Head)
- Gergaji Tangan atau Pemotong PVC
- sepana
- Primer PVC
- Simen PVC
- Pita Benang
- 1-1/4 in. or 1-1/2 in. Discharge Pipe
- 1-1/4 in. or 1-1/2 in. Check Valve
- 1-1/4 in. or 1-1/2 in. 90° Elbow
4.2 Sump Basin Keperluan
The pump requires a minimum 18-inch diameter sump basin for proper operation of the tethered float switch.
4.3 Sambungan Paip Pelepasan
- Connect a 1-1/2 inch FNPT discharge pipe to the pump's outlet. Use thread tape on the pipe threads to ensure a watertight seal.
- Install a check valve in the discharge line to prevent water from flowing back into the sump basin when the pump turns off.
- Route the discharge pipe away from the foundation to prevent water recirculation.
4.4 Sambungan Elektrik
- Ensure the power supply is 115 Volts, AC.
- Plug the pump's 8.25 ft. power cord into a properly grounded 3-prong GFCI outlet. Do not use extension cords.
- Ensure the power cord is routed to prevent damage and does not interfere with the float switch operation.
4.5 Pelarasan Suis Terapung
The tethered float switch must be able to move freely without obstruction. Adjust the tether length to set the desired ON and OFF levels for the pump. Ensure the float does not touch the sides of the sump basin or any pipes.
5. Operasi
The Everbilt sump pump operates automatically via its tethered float switch. When water in the sump basin rises and lifts the float to the 'ON' position, the pump will activate and begin discharging water. Once the water level drops and the float returns to the 'OFF' position, the pump will shut off. This pump features a continuous duty, efficient 115-Volt PSC motor.
5.1 Permulaan Permulaan
Selepas pemasangan, isikan takunganasin with water to verify the float switch activates the pump and that water is discharged correctly. Check for any leaks in the discharge piping.
6. Penyelenggaraan
Regular maintenance ensures optimal performance and extends the life of your sump pump.
- Pemeriksaan Bulanan: Periksa takungan air secara berkalaasin for debris that could obstruct the pump or float switch. Remove any dirt, gravel, or other foreign objects.
- Pemeriksaan Suis Apungan: Manually lift the float switch to ensure it moves freely and activates the pump.
- Pembersihan Pendesak: If the pump's performance decreases, disconnect power and inspect the semi-open thermoplastic impeller for clogs. Clear any debris carefully.
- Talian Pelepasan: Ensure the discharge line is free of obstructions and that the check valve is functioning correctly.
- Kord Kuasa: Periksa kord kuasa untuk sebarang tanda kerosakan atau haus. Gantikan jika perlu.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pam tidak bermula | Tiada kuasa untuk mengepam Float switch obstructed Beban terma diaktifkan | Check power supply and GFCI Clear obstruction around float Allow pump to cool down, then reset |
| Pam berjalan secara berterusan | Float switch stuck in 'ON' position Check valve faulty or missing | Clear obstruction around float Pasang atau ganti injap periksa |
| Aliran air berkurangan | Discharge pipe obstructed Pendesak tersumbat Volum rendahtage | Clear discharge pipe Clean impeller (disconnect power first) Sahkan voltage bekalan |
| Pam mengitar terlalu kerap | Float switch set too low Water returning from discharge line | Adjust float switch tether Install or check check valve |
8. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | HDPS33W |
| Kuasa kuda | 1/3 HP (0.33 HP) |
| Voltage | 115 Volt |
| Amppemadam | 5.5 A |
| Maximum Flow Rate (0 ft.) | 2600 Gelen Sejam (GPH) |
| Maximum Flow Rate (10 ft.) | 2200 Gelen Sejam (GPH) |
| Maximum Flow Rate (15 ft.) | 1950 Gelen Sejam (GPH) |
| Ketinggian Pengangkatan Maksimum | 19 Kaki |
| Discharge Outlet Diameter | 1-1/2 in. FNPT |
| Pengendalian Pepejal | Sehingga 3/8 in. |
| Pump Switch Type | Tethered Float |
| Bahan Perumahan | aluminium |
| Bahan Pendesak | Termoplastik |
| Panjang Kord | 8.25 kaki |
| Dimensi Produk (H x W x D) | 10.63 in. x 8.27 in. x 10.63 in. |
| Berat Produk | 8.49 lb (approx. 9.18 lbs packaged) |
| Minimum Sump Basin Diameter | 18 dalam. |
| Pensijilan | Diperakui CSA |
9. Waranti
This Everbilt 1/3 HP Submersible Aluminum Sump Pump comes with a Waranti terhad 1 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Everbilt customer support.
10. Sokongan Pelanggan
If you have any questions regarding the installation, operation, maintenance, or troubleshooting of your Everbilt sump pump, please contact Everbilt customer support for assistance. Keep your purchase receipt and model number (HDPS33W) readily available when contacting support.
