Triangle Borea BR08 Floor Standing Speaker

pengenalan

Welcome to the user manual for your new Triangle Borea BR08 3-Way HiFi Floor Standing Speaker. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your speaker. Please read it carefully to ensure optimal performance and longevity of your product.

The Borea BR08 is designed to deliver a rich and immersive audio experience, featuring a 3-way design for balanced sound reproduction across the frequency spectrum. Its robust construction and advanced acoustic technologies ensure high-fidelity sound for your home audio system.

Kandungan Pakej

Setelah membuka bungkusan, sila sahkan bahawa semua item berikut disertakan dalam pakej anda:

• One (1) Triangle Borea BR08 HiFi Floor Standing Speaker
• Speaker Plinths (pre-attached or to be assembled)
• Spikes (for plinths)
• Manual Pengguna (dokumen ini)
• Triangle 5 Year Limited Warranty Information (2 Year + Additional 3 Year Warranty on Registration)

Persediaan

1. Membongkar

Carefully remove the speaker from its packaging. It is recommended to retain the original packaging for future transport or storage. Handle the speaker by its base to avoid damaging the drivers or cabinet finish.

2. Penempatan Speaker

Proper speaker placement is crucial for optimal sound quality. Consider the following guidelines:

• Listening Triangle: Position the speakers and your primary listening position to form an equilateral triangle.
• Jarak dari Dinding: Avoid placing speakers directly against walls, as this can overemphasize bass frequencies. Experiment with distances (e.g., 1 to 3 feet from the rear wall) to find the best balance for your room.
• Jari ke dalam: Slightly angle the speakers inward towards the listening position (toe-in) to improve imaging and soundstage.
• Kestabilan: Ensure the speaker is placed on a stable, level surface. Use the included plinths and spikes to enhance stability and decouple the speaker from the floor, reducing unwanted vibrations.

Imej: Depan view of the Triangle Borea BR08 speaker, highlighting its three-way driver configuration and front-firing port. The speaker is shown without its grille, revealing the tweeter, midrange, and dual bass drivers.

Image: Diagram illustrating the physical dimensions of the Triangle Borea BR08 speaker, with measurements of 41 inches in height, 17.5 inches in depth, and 13 inches in width. This helps in planning placement within a room.

3. Sambungan

Sambungkan pembesar suara kepada anda amplifier or receiver using high-quality speaker cables. Ensure correct polarity: connect the positive (+) terminal on the speaker to the positive (+) terminal on your amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on your amplifier. Incorrect polarity will result in poor sound quality and reduced bass response.

The Borea BR08 has a nominal impedance of 8 Ohm (minimum 3 Ohm). Ensure your amplifier is compatible with this impedance rating.

Operasi

1. Penggunaan Awal

Setelah disambungkan, hidupkan amplifier and select the appropriate input. Start with a low volume level and gradually increase it to a comfortable listening level. Verify that sound is coming from both speakers (if using a pair) and that the sound is clear and balanced.

2. Tempoh Pecah Masuk

Like many high-fidelity audio components, your Triangle Borea BR08 speakers will benefit from a break-in period. During the first 20-50 hours of use, the speaker drivers will loosen up and reach their optimal performance. You may notice an improvement in bass response, midrange clarity, and overall soundstage as the speakers break in. Play a variety of music at moderate volume levels during this period.

3. Optimal Listening

For the best listening experience, ensure your audio source is of high quality. Experiment with speaker placement and toe-in to fine-tune the sound to your room's acoustics and personal preference. Avoid excessively high volume levels for prolonged periods to prevent potential damage to the speakers or your hearing.

Penyelenggaraan

1. Pembersihan

To clean the speaker cabinet, use a soft, dry, lint-free cloth. For stubborn marks, a slightly damp cloth with mild, non-abrasive cleaner can be used, followed immediately by a dry cloth. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the finish.

For the speaker drivers, use a soft brush or compressed air to gently remove dust. Do not touch the driver cones directly, as they are delicate and can be easily damaged.

2. Penyimpanan

If you need to store the speaker, it is recommended to use the original packaging to protect it from dust, moisture, and physical damage. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Menyelesaikan masalah

If you encounter any issues with your Triangle Borea BR08 speaker, please refer to the following table for common problems and their solutions:

Spesifikasi Teknikal

Waranti dan Sokongan

Your Triangle Borea BR08 speaker comes with a Triangle 5 Year Limited Warranty. This includes an initial 2-year warranty, with an additional 3 years available upon product registration.

To register your product and activate the extended warranty, please visit the official Triangle website or follow the instructions provided in the warranty card included in your package. Retain your proof of purchase for warranty claims.

For technical support, service, or warranty inquiries, please contact Triangle customer service through their official website or the contact information provided in your product documentation. Please have your model number (BR08) and purchase details ready when contacting support.