1. Pengenalan dan Lebihview
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Truper PRE-1/6 1/6 HP Pressurizing Pump. Please read it thoroughly before use and retain it for future reference.
The Truper PRE-1/6 is designed to increase and maintain constant water pressure in your system by automatically detecting water flow. It features a compact design, quiet operation, low power consumption, and an integrated flow sensor for reliable performance.
Rajah 1: Produk utama view of the Truper PRE-1/6 pressurizing pump.
2. Maklumat Keselamatan
AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.
- Always disconnect the pump from the power supply before performing any installation, maintenance, or repair work.
- Pastikan bekalan elektrik sepadan dengan volumtage and frequency specified on the pump's label (127 V / 60 Hz).
- Do not operate the pump with damaged electrical cords or plugs.
- Keep the pump away from flammable materials and ensure adequate ventilation to prevent overheating.
- Never immerse the pump in water or operate it in standing water.
- This pump is designed for water only. Do not use it for other liquids.
- Ensure all plumbing connections are secure and leak-free to prevent water damage or electrical hazards.
- The pump must be installed in a covered, dry, and well-ventilated area, with ambient temperatures not exceeding 40°C.
- Securely fasten the pump to a flat, stable surface using screws to prevent movement or vibration during operation.
3. Kandungan Pakej
Your Truper PRE-1/6 Pressurizing Pump package should contain the following:
- Truper PRE-1/6 Pressurizing Pump unit.
- Manual Arahan (dokumen ini).
- Additional components as indicated on the product packaging.
Figure 2: Packaging of the Truper PRE-1/6 water pressure booster pump, highlighting key features.
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Model | PRA-1/6 |
| kuasa | 1/6 HP (124 W) |
| Penggunaan | 1.1 A |
| Voltage / Kekerapan | 127V / 60Hz |
| Kelajuan | 3600 r/min |
| Aliran Maksimum | 25 L/min |
| Ketinggian Maksimum | 9 m |
| Tekanan Maksimum | 13 PSI |
| Tekanan Masuk Minimum | 0.72 PSI |
| Inlet / Outlet Diameter | 1/2" NPT |
| Kitaran Tugas | 50 minutes work / 20 minutes rest (Max. 6 hours daily) |
| Dimensions (Base x Height x Depth) | 14 x 23 x 11 cm (5.5 x 9.1 x 4.3 inci) |
| Berat badan | 6.5 paun (2.95 kg) |
| bahan | Plastic (housing), Aluminum (motor housing) |
| Penilaian Perlindungan | IP44 |
| Suhu Air Maksimum | 80°C |
| Penggulungan Motor | Tembaga |
Figure 3: Truper PRE-1/6 pump highlighting key performance specifications.
Figure 4: Dimensional diagram of the Truper PRE-1/6 pump.
5. Persediaan dan Pemasangan
Proper installation is crucial for the pump's performance and longevity. Refer to the following guidelines:
- lokasi: Pasang pam di kawasan yang tertutup, kering dan mempunyai pengudaraan yang baik. Suhu ambien tidak boleh melebihi 40°C (104°F).
- Pemasangan: Place the pump in a vertical position on a flat, stable surface. Securely fasten it using appropriate screws to prevent any movement or vibration during operation.
- Sambungan Paip: The pump features 1/2" NPT inlet and outlet connections. Ensure all plumbing is correctly sized and sealed to prevent leaks. Use thread sealant tape or compound for a watertight seal.
- Sambungan Elektrik: Connect the pump to a grounded 127 V / 60 Hz power outlet. Ensure the circuit is protected by a suitable circuit breaker or fuse.
- Integrated Flow Sensor: The pump is equipped with an integrated flow sensor for automatic operation. Ensure the water flow direction matches the arrows on the pump body.
Rajah 5: Terperinci view of the Truper PRE-1/6 pump, showing water inlet/outlet and flow sensor.
Figure 6: Installation recommendations for the Truper PRE-1/6 pump.
6. Arahan Operasi
The Truper PRE-1/6 pump is designed for user-friendly operation.
- Hidupkan kuasa: Once installed and connected to the power supply, ensure the pump's switch is in the 'AUTO' position for automatic operation.
- Operasi automatik: The integrated flow sensor will detect water flow when a faucet or appliance is opened, automatically starting the pump to boost pressure. When water flow stops, the pump will turn off.
- Mod Manual: The pump may have a 'MANUAL' setting for continuous operation, typically used for priming or specific tasks. Refer to the switch on the unit.
- Kedudukan Luar: Use the 'OFF' position to completely shut down the pump, for example, during maintenance or extended periods of non-use.
- Penggunaan yang Disyorkan: This pump is ideal for boosting pressure for a single service point.
- Kitaran Tugas: To ensure optimal performance and longevity, adhere to the recommended duty cycle of 50 minutes of continuous operation followed by 20 minutes of rest. The maximum daily operation should not exceed 6 hours.
Figure 7: Illustration demonstrating how the Truper PRE-1/6 pump increases and maintains constant water pressure.
Figure 8: Recommended uses for the Truper PRE-1/6 pump, including domestic and business applications.
7. Penyelenggaraan
Regular maintenance helps ensure the long-term reliability of your pump.
- Pembersihan: Keep the exterior of the pump clean and free from dust and debris. Use a dry cloth for cleaning.
- Sambungan: Periodically inspect all plumbing connections for any signs of leaks. Tighten connections as needed.
- Pengudaraan: Ensure the pump's ventilation openings are not obstructed to allow for proper heat dissipation.
- Storan: If the pump will not be used for an extended period, disconnect it from power, drain any water, and store it in a dry, protected area.
- Servis profesional: For any internal repairs or complex issues, contact qualified service personnel. Do not attempt to disassemble the pump yourself.
8. Penyelesaian masalah
If you encounter issues with your Truper PRE-1/6 pump, refer to the following table:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pam tidak bermula | Tiada bekalan kuasa Tukar dalam kedudukan 'MATI' Tiada aliran air dikesan | Periksa sambungan kuasa dan pemutus litar Move switch to 'AUTO' or 'MANUAL' Ensure water supply is open and flowing |
| Tekanan air rendah | Bekalan air tidak mencukupi Partial blockage in plumbing Pump not operating correctly | Verify adequate water source pressure Inspect plumbing for obstructions Contact service if pump runs but pressure is low |
| Pam berjalan secara berterusan | Kebocoran dalam sistem Faulty flow sensor | Check all plumbing for leaks Contact service for sensor inspection |
| Bunyi atau getaran yang luar biasa | Pemasangan longgar Udara dalam sistem Isu komponen dalaman | Ensure pump is securely fastened Bleed air from the system if possible Contact service for inspection |
9. Waranti dan Sokongan
The Truper PRE-1/6 Pressurizing Pump comes with a Waranti 2 tahun from the date of purchase. The Truper Group warranty covers accessories and parts, with minimal or no labor cost.
To make a warranty claim or for technical support, you do not need to present the original purchase note. Truper has 177 service centers in Mexico and 15 Latin American countries. For specific service center locations or further assistance, please visit the official Truper webtapak atau hubungi sokongan pelanggan mereka.
For more information, please visit the official Truper webtapak: www.truper.com
