pengenalan
The Cisco Touch 10 control unit is an intuitive device designed to provide a seamless experience when interacting with Cisco video conferencing systems. It allows users to manage video conferences, share content, access contact lists, and view voicemail messages with simple touch and swipe gestures. This unit is compatible with Cisco Webex Room Series and Webex Board video conferencing devices. Its customizable interface allows for adding or removing buttons and panels to control the video system or the conference room environment, including room scheduling.
Produk Selesaiview
Rajah 1: Depan view of the Cisco Touch 10 Control Unit displaying its main interface with icons for Call, Share, Lights & Shades, and Messages.
The Cisco Touch 10 features a 10.1-inch capacitive touch LCD with a resolution of 1280 x 800. It serves as the primary interface for controlling various aspects of your Cisco video conferencing setup.
Panduan Persediaan
1. Membongkar dan Pemeriksaan
- Carefully remove the Cisco Touch 10 unit from its packaging.
- Inspect the unit for any visible damage. If damage is found, contact your supplier immediately.
- Ensure all components listed in the packing slip are present.
2. penempatan
- Place the Touch 10 on a stable, flat surface within easy reach of users.
- Pastikan pengudaraan yang mencukupi di sekeliling unit.
- Elakkan meletakkan unit berhampiran sumber haba atau di bawah cahaya matahari langsung.
3. Connecting to the System
The Touch 10 connects to your Cisco video conferencing system (e.g., Webex Room Series, Webex Board) via a network cable. The unit typically receives power over Ethernet (PoE) from the video system or a PoE-enabled network switch.
- Connect one end of an Ethernet cable to the LAN port on the back of the Touch 10 unit.
- Connect the other end of the Ethernet cable to the designated control port on your Cisco video conferencing system or a PoE-enabled network switch.
- The unit will power on automatically and begin the pairing process with the video system. Follow any on-screen prompts to complete the setup.
Arahan Operasi
Navigasi Asas
- Sentuh: Ketik ikon atau pilihan untuk memilihnya.
- Leret: Leret ke kiri atau kanan untuk menavigasi antara skrin atau menu.
- Cubit-untuk-Zum: Use two fingers to zoom in or out on content, if supported by the application.
Membuat Panggilan
- From the home screen, tap the "Call" icon.
- Enter the contact name, video address, or phone number using the on-screen keyboard.
- Select the desired contact from the directory or tap the "Call" button to initiate the call.
Berkongsi Kandungan
- Tap the "Share" icon on the home screen.
- Select the source you wish to share (e.g., connected laptop, wireless sharing).
- Follow the on-screen instructions to begin sharing your content.
Customizing the Interface
The Touch 10 interface can be customized to add or remove buttons and panels, providing control over various aspects of the video system or the conference room environment. This functionality is typically configured through the connected Cisco video conferencing system's administrative interface.
Penyelenggaraan
- Pembersihan: Gunakan kain lembut dan tidak berbulu sedikit dampened with water or a non-abrasive screen cleaner to clean the display. Avoid using harsh chemicals or abrasive materials.
- Kemas Kini Perisian: Ensure the Touch 10 unit's software is kept up-to-date. Updates are typically managed through the connected Cisco video conferencing system. Refer to your system's documentation for update procedures.
- Keadaan Persekitaran: Operate the unit within recommended temperature and humidity ranges to ensure optimal performance and longevity.
Menyelesaikan masalah
Unit Tidak Berkuasa
- Verify that the Ethernet cable is securely connected to both the Touch 10 and the video conferencing system/PoE switch.
- Ensure the video conferencing system or PoE switch is powered on and providing power.
- Cuba gunakan kabel Ethernet yang lain.
Skrin Sentuh Tidak Responsif
- Restart the Touch 10 unit by disconnecting and reconnecting the Ethernet cable.
- Pastikan skrin bersih dan bebas daripada serpihan atau kelembapan.
- If the issue persists, check for software updates for the unit and the connected video system.
Cannot Connect to Video System
- Confirm that the Touch 10 and the video system are on the same network and can communicate.
- Check network settings and firewall configurations.
- Refer to the documentation for your specific Cisco video conferencing system for pairing instructions.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Paparan | 10.1-inch diagonal Capacitive touch LCD |
| Resolusi | 1280 x 800 |
| Sistem yang Disokong | Cisco MX Series, SX Series, IX Series; Cisco Webex Room Kit, Room Kit Plus, Room 55 and Room 70. Webbekas Siri Lembaga |
| Sokongan Bahasa | English, Arabic, Catalan, Czech, Danish, Dutch, Finnish, French, German, Hebrew, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese-Brazilian, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish (depends on software version) |
| Dimensi Pakej | 12.6 x 9.29 x 2.13 inci |
| Berat Barang | 1 paun |
| Nombor Model | CS-TOUCH10 |
| ASIN | B084FS47NR |
Waranti dan Sokongan
For information regarding warranty coverage, technical support, or service, please refer to the official Cisco documentation or contact your authorized Cisco reseller. Support resources, including knowledge bases and downloads, are typically available on the official Cisco webtapak.
Sumber Dalam Talian: For the most up-to-date information, user guides, and troubleshooting tips, visit the official Cisco support website. You may need your product's serial number or model number (CS-TOUCH10) for specific support queries.
