1. Pengenalan
Thank you for choosing the LUTEC P6221W-PIR24 Motion Activated Dual-Head Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions carefully before installation and retain them for future reference.
This floodlight features two adjustable LED light heads, an integrated motion sensor, and is designed for outdoor use, providing 2000 lumens of bright, 5200K daylight white light with 18 watts of power consumption.
Image 1.1: Two LUTEC P6221W-PIR24 dual-head floodlights, showcasing the product's design and dual light heads.
2. Maklumat Keselamatan
- Keselamatan Elektrik: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Consult a qualified electrician if you are unsure about wiring procedures.
- Pembumian: Pastikan lekapan dibumikan dengan betul untuk mengelakkan potensi kejutan elektrik.
- Penggunaan Luaran: This product is rated IP54 for outdoor use and is waterproof. However, ensure all connections are sealed properly to prevent water ingress.
- haba: LED lights can generate heat. Do not touch the fixture immediately after operation.
- Keselamatan Mata: Do not stare directly into the LED light source when illuminated, as it may cause eye strain or damage.
- Ketinggian Pemasangan: For optimal motion detection, install the light at a recommended height of approximately 8.2 feet (2.5 meters).
3. Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- LUTEC P6221W-PIR24 Dual-Head Floodlight (2 units)
- Wire connectors (2 x 18AWG)
- Outlet Box Screws (2)
- Pendakap Pemasangan (1)
- Fixture Screws (2)
- Rubber Stopper (1)
- Gasket (1)
Image 3.1: Diagram illustrating the various components included in the package, such as wire connectors, screws, mounting bracket, rubber stopper, and gasket.
4. Persediaan dan Pemasangan
Ikuti langkah ini untuk pemasangan yang betul:
- Matikan Kuasa: Before starting, ensure the power to the installation area is turned off at the circuit breaker.
- Pemasangan Braket Pemasangan: Secure the mounting bracket to the wall or junction box using the provided outlet box screws. Ensure it is firmly attached.
- Pendawaian: Connect the floodlight's wires to your household wiring. Typically, this involves connecting the black wire (live) to black, white wire (neutral) to white, and the ground wire to ground. Use the provided wire connectors and ensure all connections are secure.
- Lampiran Lekapan: Carefully align the floodlight fixture with the mounting bracket and secure it using the fixture screws. Ensure the gasket is properly seated to maintain the waterproof seal.
- Adjust Light Heads and Sensor: The dual light heads and the motion sensor are adjustable. Position them to cover your desired area. The light heads can be rotated 360 degrees, and the sensor can be angled for optimal detection.
- Pulihkan Kuasa: Setelah pemasangan selesai dan semua sambungan selamat, pulihkan kuasa pada pemutus litar.
Image 4.1: A person using a screwdriver to secure the floodlight during installation, demonstrating the final mounting step.
Image 4.2: A diagram illustrating the adjustable design of the floodlight, with arrows indicating the rotational movement of the light heads and motion sensor for customizable coverage.
Image 4.3: The floodlight installed above a house entryway, demonstrating its motion sensor capabilities with a 110-degree sensing angle and a maximum range of 50 feet. The image also highlights the recommended installation height of 8.2 feet for optimal performance.
5. Arahan Operasi
The LUTEC P6221W-PIR24 floodlight is designed for automatic operation based on motion detection.
Tetapan Penderia Gerakan
The motion sensor has a 110-degree sensing angle and can detect motion up to 50 feet (approximately 15 meters) away. The duration for which the light stays on after motion detection can be adjusted using the switch located on the motion sensor unit.
Imej 5.1: Gambar jarak dekat view of the motion sensor's adjustment switch, showing options for setting the light duration to 1 minute, 3 minutes, 10 minutes, or a 'TEST' mode.
- Mod UJIAN: Use this setting during installation to verify the sensor's coverage area. The light will turn on for a short period each time motion is detected.
- 1 MIN: The light will remain on for approximately 1 minute after motion is no longer detected.
- 3 MIN: The light will remain on for approximately 3 minutes after motion is no longer detected.
- 10 MIN: The light will remain on for approximately 10 minutes after motion is no longer detected.
Image 5.2: The floodlight illuminating a backyard at night, visually representing the adjustable lighting durations of 1, 3, and 10 minutes after motion detection.
6. Penyelenggaraan
Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat lampu limpah anda.
- Pembersihan: Periodically clean the light heads and motion sensor lens with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas. Pastikan kuasa dimatikan sebelum membersihkan.
- Pemeriksaan: Periksa lekapan secara berkala untuk sebarang tanda kerosakan, sambungan longgar atau haus. Atasi sebarang masalah dengan segera.
- Meterai Kalis Air: Check the integrity of the waterproof seals, especially around the mounting area, to prevent water intrusion.
Image 6.1: The LUTEC floodlight installed on an exterior wall, shown with rain falling, emphasizing its waterproof design suitable for various outdoor applications.
7. Penyelesaian masalah
Jika anda menghadapi masalah dengan lampu limpah anda, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tiada bekalan kuasa. Sambungan pendawaian longgar. Sensor tidak mengesan gerakan. | Periksa pemutus litar. Sahkan semua sambungan wayar adalah kukuh (matikan kuasa terlebih dahulu). Adjust sensor angle or test sensitivity. |
| Lampu kekal menyala secara berterusan. | Gerakan berterusan dalam zon pengesanan. Tetapan sensor salah. | Clear obstructions or adjust sensor angle. Check the time setting on the sensor (e.g., ensure it's not stuck in TEST mode). |
| Lampu menyala tanpa sebab yang jelas. | Sensor mengesan haiwan kecil, dahan bergerak atau sumber haba. | Adjust sensor angle to exclude unwanted detection areas. |
| Cahaya berkelip atau malap. | Bekalan kuasa tidak stabil. Sambungan longgar. | Rujuk juruelektrik untuk memeriksa bekalan kuasa. Sahkan semua sambungan wayar adalah kukuh (matikan kuasa terlebih dahulu). |
8. Spesifikasi
- model: P6221W-PIR24
- Jenama: LITEC
- Penggunaan Kuasa: 18 Watt
- Kecerahan: 2000 Lumen
- Suhu Warna: 5200K Siang Putih
- Jenis Sumber Cahaya: LED
- Voltage: 120 Volt (AC)
- Penderia Gerakan: 110° sensing angle, up to 50 feet (15 meters) detection range
- Adjustable Lighting Time: 1 min, 3 min, 10 min
- Tahan Air: IP54, Kalis Air
- Bahan: plastik
- Jenis Pemasangan: Lekap di dinding
- Dimensi (W x D x H): 10.28" x 5.59" x 7.24" (26.1 cm x 14.2 cm x 18.4 cm)
- Berat Barang: 1.83 paun (0.83 kg)
Image 8.1: A visual representation of the floodlight's key specifications, including its dimensions (W:10.28", D:5.59", H:7.24"), super bright 2000 lumen output, and 5200K color temperature.
9. Waranti dan Sokongan
LUTEC provides high-quality after-sales service. If you encounter any issues or have questions regarding your P6221W-PIR24 floodlight, please contact LUTEC customer support. We are available 7 days a week, 24 hours a day to assist you.
For support, please visit the official LUTEC webtapak atau rujuk maklumat hubungan yang diberikan bersama pembungkusan produk anda.
