NATIKA Backup/Front/Side View Camera WD-012 User Manual

1. Pengenalan

The NATIKA WD-012 Backup Camera is designed to provide a clear and realistic view for various vehicle types, including cars, pickup trucks, SUVs, RVs, and vans. This camera features a high-quality optical system, starlight-level night vision, and robust waterproofing, ensuring reliable performance in diverse conditions. It supports multiple video signal outputs and offers flexible mounting options for optimal integration with your vehicle.

Image: The NATIKA WD-012 Backup Camera, illustrating its design for both flush and bracket mounting.

2. Ciri-ciri Produk

• Advanced Optical System: Equipped with a 6-piece full-glass, large-aperture optical system, providing a picture with very low distortion rate for a crystal-clear, realistic view.
• lebar Viewsudut: Features a horizontal 135-degree wide-angle lens to effectively cover blind spots and enhance parking safety.
• Superior Waterproofing: Utilizes four enhanced waterproofing processes (PCB-Coating, Sealing adhesive, Filled potting, and specially-designed waterproof structure) to achieve an IP69K rating, ensuring protection against water, fog, and mist.
• Versatile Video Signal Output: Supports CVBS, AHD (720P, 30fps), and TVI (720P, 30fps) video signal outputs, compatible with various Android stereos and head units. CVBS is the default output.
• Penglihatan Malam Cahaya Bintang: Offers excellent low-light performance (0.005Lux) for clear visibility during nighttime, rainy conditions, or in dark garages.
• Pilihan Pemasangan Fleksibel: Designed for 2-in-1 installation, allowing for either surface mount or flush mount configurations.
• Multifunctional Switching Wire Loops: Includes four wire loops for customization: white loop for front view, green loop for removing guidelines, and purple/blue loops for selecting AHD/TVI video formats.

Image: Comparison of viewing angles, highlighting the 135-degree non-distorted view of the NATIKA camera.

Image: Visual representation of the camera's IP69K waterproof rating under various conditions.

3. Kandungan Pakej

The NATIKA WD-012 package includes the following items:

• 1 x Kamera Sandaran NATIKA
• 1 x 26ft/8M Extension Wire
• 2 x 304 Stainless Screws
• 1 x Pita Berganda
• 1 x Manual Pengguna
• 1 x Pita Elektrik
• 3 x Wire Clamps
• 1 x Penyingkiran Panel
• 7 x Zip Ikatan
• 1 x Kotak Hadiah NATIKA
• 1 x Kad Terima Kasih
• 1 x 0.886in/22.5MM TCT Hole Saw
• 1 x 304 Stainless Bracket
• 1 x Metal Front Housing

Image: A visual guide to the complete package contents.

4. Persediaan dan Pemasangan

4.1 Pilihan Pemasangan

The WD-012 camera offers two primary installation methods: Gunung siram dan Pemasangan Kurungan. Choose the option that best suits your vehicle and desired camera placement.

• Flush Mount: Requires drilling a 0.886in/22.5MM hole using the provided TCT Hole Saw. This method integrates the camera seamlessly into the vehicle's panel.
• Lekapan kurungan: Utilizes the included 304 stainless bracket for surface mounting. This is suitable for locations where drilling a flush hole is not feasible or desired.

Imej: Terperinci view of flush mount and bracket mount dimensions and appearance.

4.2 Wiring Diagram and Instructions

Follow the diagram and instructions below for proper wiring:

1. Connect Camera to Extension Wire: Connect the camera's male plug to the female connector of the 26ft/8M extension wire. Ensure the arrows on the connectors align and push tightly to secure the connection.
2. Sambungan Kuasa: Connect the red wire from the camera's power cable to a 12V power source, typically the positive (+) terminal of your vehicle's reversing lamp. Connect the black wire to a reliable ground (GND) point, such as an iron part of the vehicle chassis.
3. Video Signal Connection: Connect the RCA/AV connector from the extension wire to the video input (Video In) on your monitor or head unit.
4. Trigger Wire (Optional): If your head unit has a reverse triggering wire (commonly purple/white, blue/white, or pink), connect it to the small short red wire next to the RCA/AV connector on the extension wire. This enables automatic display switching when reversing. Seal this red wire with electrical tape if not used.

Image: Comprehensive wiring diagram for the NATIKA backup camera.

4.3 Nota Pemasangan Penting

• Penghalaan Kawat: When routing the camera wire inside the vehicle, ensure it is not pinched, as this can damage the camera. Drill a hole if necessary to allow the wire to pass through safely.
• Factory Radio Connection: If connecting to a factory radio, a separately ordered harness and programmer may be required, as different radios have varying requirements.
• GPS Navigator Connection: For GPS navigators, a separate adapter (RCA to 2.5mm connector) may be needed.
• Kedudukan Pemasangan Optimum: Ideally, mount the camera in the middle of the trim for the best view. If mounted to the side, guidelines on the image may appear offset.
• View Pelarasan Sudut: Before drilling, test different spots to find the best mounting location. The middle housing part of the camera can rotate up to 360 degrees, and the bracket can move up to 90 degrees to achieve the desired view sudut.
• Sambungan Selamat: Apply electrical tape to all connector joints and use zip ties to fasten wires securely within your vehicle.
• Garis panduan: The parking guidelines are for reference only. Always use your vehicle's mirrors for precise positioning when backing up.

Image: Installation rendering pictures showing camera placement on different vehicles.

Image: Additional installation rendering pictures for various vehicle models.

5. Arahan Operasi

5.1 Multifunctional Wire Loop Control

The WD-012 camera features small wire loops (white, green, purple, blue) that allow you to customize its functionality. After cutting any wire loop, you must power on the camera again for the changes to take effect.

• Green Loop:
  • Keep Green Loop: Guidelines (parking lines) will appear on the screen.
  • Cut Green Loop: Guidelines will disappear.
• Gelung Putih:
  • Keep White Loop: Image will be mirrored (default for rear view).
  • Cut White Loop: Image will be positive (for front view).
• Purple Loop:
  • Keep Purple Loop: CVBS video signal output (default).
  • Cut Purple Loop: AHD format video signal output (720P, 30fps).
• Gelung Biru:
  • Keep Blue Loop: CVBS video signal output (default).
  • Cut Blue Loop: TVI format video signal output (720P, 30fps).

Nota: If using as a front view camera without guidelines, cut both the white and green loops. For side view, rotate the middle housing part of the camera (up to 360 degrees) to achieve the preferred angle.

Image: Visual guide to the multifunctional wire loop controls.

5.2 Video Signal Output Selection

The camera defaults to CVBS video signal output. To switch to AHD or TVI, cut the respective wire loops as described above. AHD video signal typically offers a clearer image than CVBS.

Image: Day and night vision comparison between CVBS and AHD video signals.

6. Penyelenggaraan

The NATIKA WD-012 camera is designed with an IP69K waterproof rating, ensuring high resistance to water, dust, and extreme temperatures. This robust construction minimizes the need for extensive maintenance. However, to ensure longevity and optimal performance:

• Pembersihan tetap: Bersihkan kanta kamera secara berkala dengan kain lembutamp cloth to remove dirt or debris that may obstruct the view. Elakkan pembersih yang kasar.
• Semakan Sambungan: Occasionally inspect all power and video connections to ensure they remain secure and free from corrosion.
• Avoid Pinching Wires: Ensure that the camera's wiring is not pinched or damaged during vehicle use or maintenance, as this can compromise its functionality and waterproofing.

7. Penyelesaian masalah

• Blurry, Flickering, or Striped Image:
  • Check all power and video connections for looseness or damage.
  • Try using a different ground point (iron part) for the power connection.
  • Wrap power and video plugs with electrical tape to insulate from interference.
  • If the issue persists, especially in vehicles like Dodge, VW, Audi, BMW, or Mercedes Benz, consider installing a 12V DC power adapter filter rectifier to stabilize the power supply.
• Tiada Imej pada Skrin:
  • Verify all camera and monitor connections.
  • Check the display settings on your head unit or monitor.
  • Test the camera with another device that has an RCA connector (e.g., a TV) to confirm camera functionality.
• Black and White Screen with AHD/TVI:
  • Some older or cheaper Android stereos may claim AHD/TVI support but lack the necessary hardware. If this occurs, revert to the default CVBS video signal output by ensuring the purple and blue wire loops are not cut.
• Offset Guidelines:
  • This typically occurs if the camera is mounted off-center. While the camera will still function, the guidelines will not accurately reflect the vehicle's center.
• Connection Issues with Wire Clamps:
  • If using wire clamps for connections, ensure they provide a solid and reliable contact. Loose connections can lead to intermittent camera operation.

8. Spesifikasi

9. Waranti dan Sokongan

NATIKA is committed to customer satisfaction. The WD-012 camera comes with a Waranti penggantian 24 bulan dan a lifetime support guarantee. For any inquiries or technical assistance, professional customer service and technical support are available 7 days a week, 24 hours a day.

Please refer to the contact information provided in your product packaging or on the official NATIKA webtapak untuk sokongan.