INNOKIN SNS02536

Innokin Kroma R 80W Vape Starter Kit User Manual

Model: SNS02536

pengenalan

Welcome to the user manual for your new Innokin Kroma R 80W Vape Starter Kit. This powerful and compact device is designed to provide an exceptional vaping experience, supporting both Direct-to-Lung (DTL) and Mouth-to-Lung (MTL) vaping styles. Crafted from premium quality zinc alloy with an ergonomic design, the Kroma R fits comfortably in your hand. Please read this manual thoroughly to ensure proper use, maintenance, and safety.

Produk Selesaiview

Ciri-ciri Utama

  • Compact and stylish design with premium zinc alloy construction.
  • Cengkaman ergonomik untuk pengendalian yang selesa.
  • Powered by a single 18650 battery (battery not included).
  • Maximum power output of 80W.
  • Multiple work modes: Variable Wattage (VW), Variable Voltage (VV), Boost (Soft/Normal/Hard), Bypass, and Curve modes.
  • 2A Micro-USB quick charge capability.
  • Integrated safety protections for secure operation.
  • Compatible with the included 2ml Zlide Tank and optional Innokin Ajax Tank.

Kandungan Pakej

  • 1 x Innokin Kroma R Mod
  • 1 x Innokin Zlide Tank (2ml)
  • 1 x Kabel Pengecas USB
  • 1 x Manual Pengguna (dokumen ini)
  • (Note: 18650 battery is not included and must be purchased separately.)
Innokin Kroma R 80W Vape Starter Kit

Imej 1: The Innokin Kroma R 80W Vape Starter Kit, showcasing its sleek silver finish, ergonomic design, and the attached Zlide tank.

Panduan Persediaan

1. Pemasangan Bateri

  1. Locate the battery door at the bottom of the Kroma R mod.
  2. Push the lock mechanism to open the spring-loaded battery door.
  3. Insert a fully charged 18650 battery into the battery compartment, ensuring the correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery door firmly until it clicks into place.

2. Tank Installation

  1. Screw the Zlide Tank onto the 510 connector at the top of the Kroma R mod. Turn clockwise until it is finger-tight. Do not overtighten.

3. E-liquid Filling (Zlide Tank)

  1. To access the fill port, push the top cap of the Zlide Tank sideways at the indicated arrow. This will reveal the filling slot.
  2. Insert the nozzle of your e-liquid bottle into the filling slot and gently squeeze to fill the tank. Do not overfill beyond the maximum fill line.
  3. Once filled, push the top cap back into place until it clicks securely.
  4. After filling, allow the tank to stand upright for at least 5 minutes to ensure the coil is fully saturated with e-liquid. This prevents dry hits and extends coil life.

Arahan Operasi

Hidupkan/Mati Kuasa

Melaraskan Wattage / Voltage

Pemilihan Mod

Vaping

Penyelenggaraan

Membersihkan Peranti Anda

Coil Replacement (Zlide Tank)

Mengecas Bateri

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Peranti tidak dihidupkanBattery low or not inserted correctly; device off.Charge battery or reinsert correctly; press fire button 3 times rapidly to turn on.
Tiada pengeluaran wapCoil not installed; coil burnt out; tank empty; low wattage.Ensure coil is installed; replace coil; refill tank; increase wattage.
Rasa hangusCoil burnt out; insufficient e-liquid saturation; wattage terlalu tinggi.Replace coil; ensure coil is saturated before use; lower wattage.
Bocor dari tangkiCoil not seated properly; O-rings damaged; overfilling; cracked glass.Re-seat coil; check/replace O-rings; do not overfill; replace glass if cracked.

Spesifikasi

Dimensi Produk5.7 x 42.5 x 14.5 cm
Berat Barang370 g (0.37 Kilogram)
Wattage JulatSehingga 80 watt
Isipadu Tangki2 mililiter
Jenis BateriSingle 18650 (not included)
MengecasMicro-USB, 2A Quick Charge
bahanAloi Zink
warnaPerak
Nombor ModelSNS02536

Maklumat Keselamatan Penting

PENAFIAN HUKUM: The following warning only applies when the product is used with nicotine-containing e-liquid, this product contains nicotine which is a highly addictive substance. Keep this product out of the reach of children. Size of cartridge (not exceeding 2ml).

Langkah Keselamatan Am

Waranti dan Sokongan

For warranty information and technical support, please refer to the warranty card included in your product packaging or visit the official Innokin website. If you encounter any issues not covered in this manual, please contact Innokin customer service for assistance.

Dokumen Berkaitan - SNS02536

Praview Sistem Pod EQ Innokin: Cara Mengisi dan Mengaktifkan Mod Rangsangan
Panduan untuk mengisi sistem pod Innokin EQ dan mengaktifkan mod rangsangannya. Ketahui cara menggunakan peranti Innokin EQ anda dengan selamat dan berkesan.
Praview Panduan Ringkas Tangki ZENITH NEX Innokin
Panduan ringkas yang komprehensif untuk tangki vape Innokin ZENITH NEX, memperincikan komponennya, cara mengisinya, menggantikan gegelung dan menyediakan spesifikasi teknikal. Termasuk maklumat penggunaan dan keselamatan yang penting.
Praview Manual Pengguna Innokin GO S: Ciri, Penggunaan dan Keselamatan
Manual pengguna yang komprehensif untuk peranti e-rokok Innokin GO S, meliputi komponen, cara penggunaan, maklumat bateri, perlindungan dan spesifikasi. Tersedia dalam pelbagai bahasa.
Praview Innokin Klypse Plus Quick Guide: Features, Specifications, and Usage
Official quick guide for the Innokin Klypse Plus pod system. Learn about components, filling, charging, specifications, and safety precautions.
Praview Panduan Mula Pantas Innokin Prism T18II: Isi Semula dan Penggantian Gegelung
Panduan ringkas untuk tangki vape Innokin Prism T18II, meliputi pengenalan komponen, arahan pengisian semula langkah demi langkah dan prosedur penggantian gegelung untuk pengalaman vape yang optimum.
Praview Panduan Ringkas Tangki Minimum Innokin Zenith
Panduan ringkas ringkas dan boleh diakses untuk Tangki Minimum Innokin Zenith, memperincikan komponen, arahan pengisian, pelarasan aliran udara dan penggantian gegelung. Termasuk spesifikasi dan maklumat hubungan.