Kohler 5487K-CP

Kohler Bardon Touchless Wall-Mount Soap Dispenser User Manual

Model: 5487K-CP

pengenalan

Thank you for choosing the Kohler Bardon Touchless Wall-Mount Soap Dispenser. This manual provides essential information for the proper installation, operation, and maintenance of your new soap dispenser. Please read these instructions carefully before installation and keep them for future reference.

Kohler Bardon Touchless Wall-Mount Soap Dispenser in Polished Chrome

Image: Kohler Bardon Touchless Wall-Mount Soap Dispenser. This image shows the sleek, modern design of the dispenser mounted on a wall, highlighting its polished chrome finish.

Kandungan Pakej

  • 1 x Kohler Bardon Touchless Wall-Mount Soap Dispenser
  • 1 x Manual Arahan Pemasangan
  • 1 x Kad Waranti

Persediaan dan Pemasangan

Proper installation is crucial for the optimal performance of your touchless soap dispenser. Refer to the included installation instruction manual for detailed, step-by-step guidance.

  1. Penyediaan: Ensure the installation area is clean, dry, and free from obstructions. Gather necessary tools (e.g., drill, screwdriver, level).
  2. Lokasi Pemasangan: Select a suitable wall location, ensuring adequate clearance for operation and refilling. Avoid mounting directly above electrical outlets or in areas prone to excessive splashing.
  3. Penggerudian: Mark the drilling points accurately using the provided template (if applicable). Drill holes according to the instructions.
  4. Pemasangan selamat: Attach the mounting bracket to the wall using appropriate fasteners. Secure the dispenser to the mounting bracket.
  5. Pemasangan Bateri: Open the battery compartment, insert the required batteries (typically AA or AAA, not included) according to polarity markings. Close the compartment securely.
  6. Mengisi Dispenser: Open the soap reservoir cap. Pour liquid soap into the reservoir, ensuring not to overfill. Close the cap tightly.
  7. Ujian Permulaan: Activate the dispenser a few times to prime the pump and ensure proper soap dispensing.

Note: For detailed diagrams and specific mounting hardware, consult the dedicated installation instruction sheet provided in the package.

Arahan Operasi

The Kohler Bardon Touchless Soap Dispenser is designed for hygienic and convenient use.

  1. Pengaktifan: Place your hand approximately 2-5 cm (1-2 inches) below the sensor located at the bottom of the dispenser.
  2. Pengedaran Sabun: The sensor will detect your hand, and a measured amount of soap will be dispensed automatically.
  3. Pelbagai Dispens: If more soap is desired, remove your hand and place it under the sensor again.
  4. Kepekaan Sensor: Ensure the sensor area is clear of obstructions and direct sunlight, which can interfere with operation.

Penyelenggaraan dan Penjagaan

Regular cleaning and maintenance will ensure the longevity and optimal performance of your dispenser.

  • Pembersihan Luaran: Lap permukaan luar dengan lembut, damp cloth. For polished chrome finishes, use a non-abrasive cleaner specifically designed for chrome. Avoid harsh chemicals, abrasive pads, or ammonia-based cleaners, as these can damage the finish.
  • Pembersihan Sensor: Gently wipe the sensor window with a soft, dry cloth to remove any soap residue or dust that might obstruct its function.
  • Refilling Soap: Refill the soap reservoir when the soap level is low. Avoid mixing different types of soap, as this can lead to clogging.
  • Penggantian Bateri: Replace batteries when the dispenser stops responding or the indicator light (if present) signals low power. Always replace all batteries at once with new ones of the same type.
  • Storan Jangka Panjang: If the dispenser will not be used for an extended period, empty the soap reservoir and remove the batteries to prevent leakage and corrosion.

The KOHLER Life-Bright finish is designed to last 2 times longer than industry durability standards, strengthened with 3 layers of coating. Proper care will help maintain this finish.

Menyelesaikan masalah

If you encounter issues with your soap dispenser, refer to the following common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
Dispenser does not activate.
  • Bateri lemah atau mati.
  • Sensor terhalang atau kotor.
  • No soap in reservoir.
  • Gantikan bateri.
  • Bersihkan tingkap sensor.
  • Isi semula takungan sabun.
Soap dispenses slowly or inconsistently.
  • Soap too thick.
  • Clogged pump mechanism.
  • Kuasa bateri rendah.
  • Dilute soap with a small amount of water (check soap manufacturer's recommendations).
  • Clean the dispenser nozzle.
  • Gantikan bateri.
Dispenser drips after use.
  • Excess soap in nozzle.
  • Sensor over-sensitivity.
  • Wipe the nozzle after use.
  • Ensure dispenser is not mounted in an area with constant movement or reflections that might trigger the sensor.

Spesifikasi

CiriPerincian
Nombor Model5487K-CP
JenamaKohler
warnaSelesai Chrome yang digilap
bahanlogam
Dimensi Produk18L x 32W x 15H Sentimeter
Jenis Bahan PercumaBebas Plumbum
Berat Barang1 kg 110 g
PembinaanSolid Metal Construction for Durability and Reliability
Selesai KetahananKOHLER Life-Bright (2x industry standard, 3 layers of coating)

Maklumat Waranti

This Kohler Bardon Touchless Wall-Mount Soap Dispenser comes with a Waranti 10 Tahun. Please refer to the included warranty card for full terms and conditions, including coverage details, limitations, and how to make a claim. Keep your proof of purchase for warranty validation.

Sokongan Pelanggan

For further assistance, technical support, or to inquire about replacement parts, please contact Kohler customer service. You can find contact details on the Kohler official webtapak atau pada kad jaminan anda.

Pengeluar: KOHLER

Pengimport: KOHLER INDIA CORPORATION PRIVATE LIMITED, 26 A, RING ROAD, LAJPAT NAGAR-IV, NEW DELHI-110024

Visit the official Kohler Store for more products and information: Kohler Store on Amazon.in