RANZHIX KWD808-I Electric Acupuncture Stimulator Instruction Manual

1. Pengenalan

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the RANZHIX KWD808-I Electric Acupuncture Stimulator. Please read this manual thoroughly before using the device and retain it for future reference.

2. Maklumat Keselamatan Penting

WARNING: This device is intended for professional use or under the guidance of a qualified practitioner. Do not use this device without proper training or consultation.

• Consult a healthcare professional before use, especially if you have pre-existing medical conditions, are pregnant, or have a pacemaker.
• Do not apply electrodes over open wounds, irritated skin, or areas with decreased sensation.
• Jauhkan peranti dan aksesori daripada kanak-kanak.
• Use only the power adapter and accessories provided by the manufacturer.
• Kenyataan mengenai suplemen makanan belum dinilai oleh FDA dan tidak bertujuan untuk mendiagnosis, merawat, menyembuhkan atau mencegah sebarang penyakit atau keadaan kesihatan.

3. Kandungan Pakej

Carefully unpack the box and ensure all items listed below are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

• KWD808-I Main Unit
• Power Adapter (110~240V compatible)
• Output Electrode Wires (6 sets, various colors)
• Pad Elektrod Pelekat sendiri
• Probe Pengesanan
• Manual Pengguna

Gambar 3.1: Lebihview of the KWD808-I Stimulator and its complete accessories, including the main unit, power adapter, electrode wires, pads, and detection probe.

Rajah 3.2: Jarak dekat view of the six sets of colored electrode wires, each designed for connecting to the output channels of the device.

Figure 3.3: The self-adhesive electrode pads and a roll of medical tape, used for securing electrodes during treatment.

4. Peranti Lebihview dan Kawalan

The KWD808-I features a user-friendly interface with clearly labeled controls for precise adjustments.

Rajah 4.1: Terperinci view of the KWD808-I control panel, highlighting the frequency and intensity adjustment knobs, mode selection buttons, and output indicators.

Komponen Utama:

• Suis kuasa: Menghidupkan/mematikan peranti.
• Tombol Pemasa: Adjusts treatment duration (0-60 minutes).
• Detection Outlet (APD): For connecting the detection probe.
• Frequency Adjustment Knobs (FREQ): Controls the output frequency for each channel.
• Intensity Adjustment Knobs (OUTPUT): Controls the output intensity for each channel.
• Waveform Selection Buttons: Allows selection of different pulse waveforms (e.g., continuous, intermittent, dense-disperse).
• Keluaran Lamps: Indicate active output for each channel.

5. Arahan Persediaan

1. penempatan: Place the KWD808-I unit on a stable, flat surface away from moisture and direct sunlight.
2. Sambungan Kuasa: Connect the power adapter to the DC input port on the device and then plug it into a standard 110~240V AC power outlet.
3. Sambungan Elektrod:
   • Attach the electrode wires to the self-adhesive electrode pads.
   • Plug the electrode wires into the desired output channels (OUTPUT 1-6) on the front panel.
   • Pastikan semua sambungan selamat.
4. Detection Probe (Optional): If using the detection probe, connect it to the 'DETECTION OUTLET' port.

6. Arahan Operasi

1. Hidupkan kuasa: Turn the power switch to the 'ON' position. The power lamp harus menerangi.
2. Tetapkan Pemasa: Rotate the 'TIMER' knob to set the desired treatment duration (e.g., 30 minutes).
3. Pilih Bentuk Gelombang: Press the appropriate waveform selection button (1-6) to choose the desired pulse pattern.
4. Gunakan Elektrod: Place the self-adhesive electrode pads on the intended areas of the body. Ensure good skin contact.
5. Laraskan Kekerapan: Slowly turn the 'FREQ' knob for each active channel to set the desired frequency.
6. Laraskan Intensiti: Gradually increase the 'OUTPUT' intensity knob for each active channel until a comfortable sensation is felt. Avoid setting the intensity too high, which may cause discomfort. The output lamps will flash to indicate active output.
7. Pemantauan: Monitor the user's comfort level throughout the session. Adjust intensity as needed.
8. Session End: The device will automatically stop when the timer reaches zero. Turn off the power switch and carefully remove the electrodes.

7. Penyelenggaraan

• Pembersihan: Wipe the main unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Pad Elektrod: Clean electrode pads with a damp cloth and allow them to air dry. Replace pads when their adhesive properties diminish.
• Storan: Simpan peranti dan aksesori di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
• Pemeriksaan: Periksa semua kabel dan sambungan secara berkala untuk tanda-tanda haus atau kerosakan. Gantikan komponen yang rosak dengan segera.

8. Penyelesaian masalah

If you encounter issues with your KWD808-I device, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact RANZHIX customer support for further assistance.

9. Spesifikasi

10. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please contact RANZHIX directly through their official channels. Keep your purchase receipt as proof of purchase.