Manual Pengguna Kamera Kubah Turret IP LTS CMIP3342W-28MA 4MP

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your LTS CMIP3342W-28MA 4MP IP Turret Dome Camera. Please read this manual thoroughly before using the product to ensure correct usage and to prevent damage or injury. Keep this manual for future reference.

2. Maklumat Keselamatan

• Ensure the power supply meets the camera's requirements. Incorrect voltage boleh menyebabkan kerosakan.
• Jangan dedahkan kamera kepada suhu, kelembapan atau persekitaran yang menghakis yang melampau.
• Avoid pointing the camera lens directly at strong light sources for extended periods, as this may damage the image sensor.
• Kendalikan kamera dengan berhati-hati. Jangan jatuhkan atau tertakluk kepada getaran yang kuat.
• All installation and service should be performed by qualified personnel.

3. Kandungan Pakej

Verify that all items listed below are included in your package. If any items are missing or damaged, contact your supplier immediately.

• LTS CMIP3342W-28MA IP Turret Dome Camera
• Skru Pemasangan dan Palam Dinding
• Templat Bor
• Wrench Hex
• Kit Penyambung Kalis Air
• Panduan Mula Pantas (dokumen ini)

Imej 3.1: The LTS CMIP3342W-28MA IP Turret Dome Camera shown with its included accessories, including mounting hardware and a drill template for installation.

4. Produk Lebihview

The LTS CMIP3342W-28MA is a 4MP IP Turret Dome Camera designed for reliable surveillance. It features a 2.8mm fixed lens, built-in microphone, Wide Dynamic Range (WDR), and 100ft (30m) IR night vision.

Imej 4.1: Depan view of the LTS CMIP3342W-28MA camera, highlighting the lens and IR illuminators.

Imej 4.2: sebelah view of the camera, illustrating the turret design which allows for flexible angle adjustment after mounting.

5. Persediaan dan Pemasangan

5.1 Lokasi Pemasangan

Choose a suitable mounting location that provides the desired field of view and is within range of your network infrastructure. Ensure the surface is strong enough to support the camera's weight.

5.2 Langkah Pemasangan

1. Affix the provided drill template to the desired mounting surface.
2. Drill holes according to the template for mounting screws and cable routing.
3. Insert wall plugs into the drilled holes if mounting on masonry.
4. Route the network cable through the designated hole.
5. Pasangkan tapak kamera pada permukaan pelekap menggunakan skru yang disediakan.
6. Laraskan sudut kamera mengikut keperluan.

5.3 Pendawaian dan Kesambungan

This camera utilizes Power over Ethernet (PoE) for both power and data transmission. Connect a standard Ethernet cable from your PoE-enabled switch or NVR to the camera's network port. The camera is not compatible with DC power or BNC video connections.

Imej 5.1: Illustration of compatible network cable (PoE) for the camera, contrasting with incompatible DC power and BNC video connections.

6. Arahan Operasi

6.1 Tatarajah Awal

Upon first power-up, the camera will obtain an IP address via DHCP if available. You can use a manufacturer-provided IP search tool to discover the camera's IP address on your network. Access the camera's web antara muka dengan memasukkan alamat IPnya ke dalam a web pelayar.

6.2 Web Akses Antaramuka

Enter the default username and password (refer to your Quick Start Guide or manufacturer's documentation for default credentials). It is highly recommended to change the default password immediately for security purposes.

6.3 Ciri-ciri Utama

• Resolusi 4MP: Provides high-definition video for clear image capture.
• Kanta Tetap 2.8mm: Menawarkan bidang yang luas view, suitable for general surveillance.
• Mikrofon terbina dalam: Enables audio recording alongside video.
• WDR (Julat Dinamik Lebar): Improves image quality in scenes with both very bright and very dark areas.
• Penglihatan Malam IR: Infrared illuminators provide clear video up to 100ft (30m) in low-light or no-light conditions.
• Pengesanan Pergerakan: Configure motion detection zones and sensitivity for event-triggered recording or alerts.

7. Penyelenggaraan

7.1 Pembersihan

Regularly clean the camera lens and housing with a soft, dry cloth. For stubborn dirt, use a mild detergent solution applied to the cloth, then wipe dry. Do not use harsh chemicals or abrasive cleaners.

7.2 Kemas Kini Perisian Tegar

Periksa pengeluar secara berkala website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the provided instructions carefully when performing updates.

8. Penyelesaian masalah

• Tiada Kuasa: Ensure the Ethernet cable is securely connected and your PoE source is active and functioning correctly.
• Tiada Video: Verify network connectivity. Check the camera's IP address and ensure it's accessible on the network. Confirm that the NVR or viewing software is configured correctly.
• Kualiti Imej Lemah: Clean the lens. Check for obstructions. Adjust camera settings such as exposure, brightness, and WDR in the web antara muka.
• Penglihatan Malam Tidak Berfungsi: Ensure IR illuminators are not obstructed. Check night vision settings in the camera's web antara muka.
• Tidak Boleh Akses Web Antara muka: Verify the camera's IP address. Ensure your computer is on the same network segment. Try pinging the camera's IP address.

9. Spesifikasi

10. Waranti dan Sokongan

For warranty information and technical support, please refer to the official LTS webtapak atau hubungi pengedar sah anda. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.