1. Pengenalan
HQST 20 Amp MPPT Solar Charge Controller is designed to efficiently manage power flow from your solar panels to your battery bank. Utilizing advanced Maximum Power Point Tracking (MPPT) technology, it ensures high tracking efficiency and peak conversion efficiency, maximizing the energy harvest from your solar array. This controller automatically detects 12V or 24V DC system voltages and is compatible with various battery types, including sealed, vented, colloidal, and lithium batteries.
It incorporates multiple electronic protections to safeguard your system against common faults, ensuring reliable and safe operation. The compact design and efficient heat dissipation further enhance its performance and longevity.
2. Maklumat Keselamatan
Sila baca semua arahan dan amaran dengan teliti sebelum pemasangan dan pengendalian. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan parah.
- Sentiasa sambungkan bateri kepada pengawal cas dahulu, kemudian panel solar, dan akhirnya beban. Putuskan sambungan dalam susunan terbalik.
- Ensure all wiring is correctly polarized and securely connected to prevent short circuits.
- Use appropriate circuit breakers or fuses for all connections.
- Do not disassemble or attempt to repair the controller. Refer to qualified service personnel.
- Pasang pengawal di kawasan yang mempunyai pengudaraan yang baik, jauh daripada bahan mudah terbakar dan cahaya matahari langsung.
- Wear appropriate personal protective equipment (PPE) when working with batteries and electrical systems.
Figure 2.1: The controller offers comprehensive protection against various electrical faults.
3. Produk Lebihview
HQST 20 Amp MPPT Solar Charge Controller is a robust device designed for optimal solar power management. Key features include:
- Kecekapan Penukaran Tinggi: Up to 99.9% tracking efficiency and 98% peak conversion efficiency.
- Vol. Automatiktage Pengesanan: Auto-detects 12V or 24V DC system voltages.
- Berbilang-stage Mengecas: Ciri-ciri 5-stage charging (quick, holding, boost, float, and equalization) for optimal battery health.
- Keserasian Bateri: Supports sealed, vented, colloidal, and lithium batteries. User mode allows custom charging parameters.
- Perlindungan Lanjutan: Includes overcharging, over current, overload, overheat, short circuit, reverse current, and reverse polarity protection.
- Pelesapan Haba yang Cekap: Die-cast aluminum heat sink minimizes power loss from heat.
- Paparan LCD: Provides real-time system operating information and error codes.
Rajah 3.1: HQST 20 Amp MPPT Solar Charge Controller with Remote Meter.
Figure 3.2: Comprehensive functional design with labeled components.
4. Persediaan
Follow these steps for proper installation of your HQST MPPT Solar Charge Controller:
- Pemasangan: Choose a dry, well-ventilated location away from direct sunlight and heat sources. Ensure adequate space around the controller for air circulation. The controller dimensions are approximately 5.91" x 2.42" x 4.16" (L x W x H).
- Sambungan Bateri: Connect the battery cables to the battery terminals on the charge controller. Ensure correct polarity (positive to positive, negative to negative). This connection must be made first.
- Sambungan Panel Suria: Connect the solar panel cables to the solar panel terminals on the charge controller. Ensure correct polarity.
- Sambungan Beban (Pilihan): If using a DC load directly from the controller, connect the load cables to the load terminals. Ensure correct polarity.
- Sensor Suhu (Pilihan): Connect the external temperature sensor to the designated interface. This allows for temperature compensation of battery charging voltage.
- Remote Meter (Optional): Connect the remote meter (RM-6) to the communication interface for external display and control.
Figure 4.1: Typical wiring diagram for the solar charge controller system.
Note: The solar panel, battery, adapter kit, tray cables, DC load, and power inverter are not included with the charge controller.
5. Beroperasi
Once installed, the controller will automatically detect the system voltage (12V or 24V). The LCD display provides real-time information about your system's performance.
5.1. Pemilihan Jenis Bateri
The controller is compatible with various battery types. To select or customize the battery type:
- Access the settings menu via the operation keys on the controller or the remote meter.
- Navigate to the battery type setting.
- Select from pre-set options (Sealed, Vented, Colloidal, Lithium) or enter 'User' mode to set custom charging parameters.
Figure 5.1: Compatible battery types for the charge controller.
5.2. Mengecas Stages
Pengawal menggunakan 5-stage charging algorithm to optimize battery life and performance:
- Caj Cepat: Initial bulk charging phase.
- Holding Charge: Absorption phase, maintaining a constant voltage.
- Caj Meningkatkan: Raises voltage untuk memastikan cas penuh.
- Caj Terapung: Maintains battery at a full state of charge.
- Equalization (for lead-acid batteries only): Periodically overcharges to balance cell voltages.
Rajah 5.2: Ilustrasi 4-stage proses pengecasan.
6. Penyelenggaraan
Penyelenggaraan berkala memastikan jangka hayat dan prestasi optimum pengawal cas solar anda.
- Kebersihan: Pastikan pengawal bersih dan bebas daripada habuk dan serpihan. Gunakan kain kering untuk pembersihan.
- Sambungan: Periodically check all wiring connections for tightness and corrosion. Loose connections can cause overheating and poor performance.
- Pengudaraan: Ensure that the ventilation openings are not blocked to allow for proper heat dissipation.
- Pemeriksaan Bateri: Regularly inspect your batteries for any signs of damage, swelling, or leakage. Follow battery manufacturer's maintenance guidelines.
7. Penyelesaian masalah
This section addresses common issues you might encounter with your HQST MPPT Solar Charge Controller.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada paparan/Matikan kuasa | Bateri tidak disambungkan atau volum rendahtage; Kekutuban songsang. | Semak sambungan bateri dan voltage. Ensure correct polarity. Charge battery if voltage terlalu rendah. |
| No charging from solar panel | Solar panel not connected; Insufficient sunlight; Solar panel fault; Reverse polarity. | Check solar panel connections and polarity. Ensure adequate sunlight. Test solar panel output. |
| Bateri tidak dicas sepenuhnya | Incorrect battery type setting; Insufficient solar input; Battery degradation. | Verify battery type setting. Increase solar panel capacity or improve sun exposure. Consider battery replacement. |
| Overcharge/Over-discharge protection active | Bateri voltage outside safe limits. | The controller's protection features are working. Check battery health and system load. |
| Kod ralat pada paparan | Kesalahan sistem tertentu. | Refer to the detailed error code list in the full user manual (PDF) for specific troubleshooting steps. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | HQST |
| Model | 20 Amp Pengawal Caj Solar MPPT |
| UPC | 810009714170 |
| Dimensi Produk | 5.91 x 2.42 x 4.16 inci |
| Berat Barang | 1.63 paun |
| Voltage | 12V/24V (Auto-detect) |
| bahan | aluminium |
| Jenis Paparan | LCD |
| Kecekapan Penjejakan | Sehingga 99.9% |
| Kecekapan Penukaran | Peak 98% |
9. Waranti & Sokongan
HQST 20 Amp MPPT Solar Charge Controller typically comes with a 3-year warranty from the manufacturer, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty service, or further inquiries, please contact HQST customer service through their official website or the retailer where the product was purchased. Provide your product model number and a detailed description of the issue for faster assistance.
For the most detailed information, including specific error codes and advanced settings, please refer to the official User Manual PDF available for download from the HQST website or the product's Amazon listing page.
