1. Pengenalan
This manual provides essential information for the safe installation, operation, and maintenance of your SATCO S9950 23 Watt PLL T5 LED Light Bulb. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: The SATCO S9950 23 Watt PLL T5 LED Light Bulb. This image displays the elongated, frosted LED tube with a 2G11 base, designed for efficient lighting.
2. Maklumat Keselamatan
AMARAN: Risiko renjatan elektrik. Pemasangan memerlukan pengetahuan tentang sistem elektrik luminair. Jika tidak berkelayakan, jangan cuba memasang. Hubungi juruelektrik yang berkelayakan.
- Sentiasa matikan kuasa pada pemutus litar sebelum pemasangan, penyingkiran atau pemeriksaan.
- l iniamp is designed for Ballast Bypass (Type B) operation. It requires direct wiring to the main voltage. Do not use with a ballast.
- Do not use in fully enclosed luminaires unless specified.
- Pastikan voltage supply (120-277V) matches the lampkeperluan.
- Jangan buka atau ubah suai lamp.
- Elakkan daripada menyentuh lamp dengan tangan basah.
- Buang lamps mengikut peraturan tempatan.
3. Produk Lebihview dan Ciri
The SATCO S9950 is a high-efficiency 23 Watt PLL T5 LED light bulb, designed as a direct replacement for traditional fluorescent lamps in ballast bypass applications. It offers significant energy savings and a long lifespan.
- model: S9950
- Wattage: 23 Watt
- Jenis asas: 2G11
- Keluaran Lumen: 2800 Lumen
- Suhu Warna: 3500K (Putih Neutral)
- Voltage: 120-277 Volt
- Jenis: Ballast Bypass (Type B)
- ciri: Frosted finish for diffused light
4. Setup and Installation (Ballast Bypass)
LED ini lamp operates on a ballast bypass system, meaning the existing ballast must be removed or bypassed, and the lamp wired directly to the main voltage supply. Professional installation is recommended.
- Matikan Kuasa: Locate the circuit breaker controlling the fixture and turn off the power supply. Verify power is off using a voltage penguji.
- Alih Keluar L Sedia Adaamp: Carefully remove the old fluorescent lamp dari perlawanan.
- Pintas/Tanggalkan Balast:
- Open the fixture to access the wiring compartment.
- Disconnect all wires leading to and from the existing ballast.
- Remove the ballast from the fixture.
- Rewire the fixture to provide direct AC line voltage kepada lamp holders. For a 2G11 base, ensure the live (L) and neutral (N) wires are connected to the appropriate pins on the lamp holder. Refer to the fixture's wiring diagram or consult a qualified electrician.
- Pasang LED Lamp: Insert the SATCO S9950 LED lamp into the 2G11 lamp holder, ensuring it is securely seated.
- Pulihkan Kuasa: Close the fixture cover and restore power at the circuit breaker.
- Ujian: Hidupkan suis lampu untuk mengesahkan operasi yang betul.
Nota: l iniamp is designed for single-ended power input. Ensure wiring is configured correctly for the 2G11 base.
5. Arahan Operasi
Once installed, the SATCO S9950 LED light bulb operates like any standard light source. Simply use the wall switch or fixture control to turn the light on or off.
- Pastikan bekalan kuasa berada dalam vol yang ditentukantagjulat e (120-277V).
- Avoid frequent on/off cycling, though LED lamps are generally robust to this.
6. Penyelenggaraan
The SATCO S9950 LED light bulb requires minimal maintenance.
- Pembersihan: Before cleaning, ensure the power is off and the lamp is cool. Wipe the frosted surface with a soft, dry, or slightly damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Penggantian: Apabila lamp reaches the end of its lifespan, follow the "Setup and Installation" steps in reverse to safely remove and replace it. Ensure power is off before handling.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lamp tidak menyala. |
|
|
| Lamp berkelip-kelip. |
|
|
8. Spesifikasi
| Atribut | Nilai |
|---|---|
| Jenama | Satco |
| Nombor Model | S9950 |
| Jenis Cahaya | LED |
| Wattage | 23 Watt |
| Wat Setara Pijartage | 40 Watt |
| Saiz Bentuk Mentol | T5 1/2 |
| Jenis Asas | 2G11 |
| Ciri Khas | Frosted |
| Warna Cerah | Putih Neutral |
| Suhu Warna | 3500 Kelvin |
| Kecerahan | 2800 Lumen |
| Voltage | 120-277 Volt |
| Sumber Kuasa | Elektrik Bertali |
| Indeks Paparan Warna (CRI) | 80 |
| Kecekapan | 122 Lumen/Watt |
| bahan | Kuprum (komponen dalaman) |
| Dimensi Produk | 25 x 7 x 7 inches (packaging/overall dimensions, bulb itself is elongated) |
| Berat Barang | 14.4 auns |
| Penggunaan Dalaman/Luar | Outdoor (suitable for appropriate fixtures) |
9. Waranti dan Sokongan
For warranty information or technical support regarding your SATCO S9950 LED light bulb, please refer to the official Satco webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda untuk tuntutan waranti.
Pengeluar: Satco
Webtapak: www.satco.com
