OCOM OCPP-88A-URL Thermal Receipt Printer User Manual

1. Pengenalan

This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your OCOM OCPP-88A-URL Thermal Receipt Printer. This high-speed 80mm thermal printer is designed for efficient and reliable receipt printing in various environments, including retail and kitchen settings. It features multiple connectivity options and an automatic cutter for convenience.

2. Maklumat Keselamatan

• Always use the original power adapter and cable provided with the printer.
• Jangan dedahkan pencetak kepada air, kelembapan atau suhu yang melampau.
• Elakkan meletakkan pencetak di bawah cahaya matahari langsung atau berhampiran sumber haba.
• Pastikan pengudaraan yang betul di sekitar pencetak untuk mengelakkan terlalu panas.
• Jangan cuba membuka atau membaiki pencetak sendiri. Rujuk kepada kakitangan servis yang berkelayakan.
• Jauhkan daripada kanak-kanak.
• Be cautious when handling the auto-cutter blade.

3. Kandungan Pakej

Sila semak kandungan bungkusan anda untuk memastikan semua barang ada dan tidak rosak:

• OCOM OCPP-88A-URL Pencetak Resit Terma
• Penyesuai Kuasa
• Kabel Kuasa
• Kabel USB
• Gulungan Kertas Termal (gulungan permulaan)

Figure 3.1: OCOM OCPP-88A-URL Thermal Receipt Printer with included power adapter, power cable, USB cable, and a thermal paper roll.

4. Persediaan

4.1 Kuasa Penyambung

1. Sambungkan kabel kuasa ke penyesuai kuasa.
2. Plug the power adapter's output connector into the power port on the back of the printer.
3. Palamkan kabel kuasa ke salur keluar elektrik yang sesuai.
4. Ensure the power indicator light on the printer illuminates, indicating power is supplied.

4.2 Memuatkan Kertas Terma

1. Press the paper cover open button (usually located on the side or front of the printer) to open the paper compartment.
2. Insert the thermal paper roll with the printing surface facing outwards (the paper should feed from the bottom of the roll).
3. Tarik sedikit kertas keluar melepasi pemotong.
4. Close the paper cover firmly until it clicks into place. Ensure there are no wrinkles in the paper.

4.3 Connecting Interfaces (USB, Serial, Ethernet)

The OCPP-88A-URL printer supports multiple connection types. Choose the appropriate method for your setup:

• Sambungan USB: Sambungkan satu hujung kabel USB ke port USB pencetak dan hujung yang satu lagi ke port USB yang tersedia pada komputer anda.
• Sambungan Bersiri: Connect the serial cable (not included) to the printer's serial port and to the serial port on your computer or POS system.
• Sambungan Ethernet: Connect a standard Ethernet cable to the printer's Ethernet port and to your network router or switch. Ensure your network is configured correctly for the printer to obtain an IP address.

4.4 Pemasangan Pemandu

Before using the printer, you may need to install the appropriate drivers on your computer or POS system. Drivers are typically available on the OCOM official website or on a driver CD included with the printer (if applicable). Follow the instructions provided with the driver package for installation.

5. Beroperasi

5.1 Hidupkan/Mati Kuasa

• Hidupkan kuasa: Press the power button (usually located on the front or side) until the power indicator light turns on steadily.
• Matikan: Press and hold the power button until the power indicator light turns off.

5.2 Cetakan Ujian Kendiri

A self-test print can help verify the printer's basic functionality and print quality without requiring a computer connection.

1. Ensure the printer is powered off and paper is loaded.
2. Press and hold the FEED button (or similar button, refer to printer's specific layout).
3. While holding the FEED button, turn on the printer.
4. Release the FEED button once the self-test print begins. The printer will print its configuration and status.

5.3 Lampu Penunjuk

Pencetak ini mempunyai lampu penunjuk untuk menyampaikan statusnya:

• LED KUASA: Menunjukkan pencetak dihidupkan.
• LED RALAT: Illuminates or blinks to indicate an error (e.g., paper out, print head overheating, cutter error). Refer to the troubleshooting section for details.
• PAPER LED: Indicates that the paper roll is low or out.

6. Penyelenggaraan

6.1 Membersihkan Kepala Cetak

Pembersihan kepala cetak secara berkala memastikan kualiti cetakan yang optimum dan memanjangkan jangka hayat pencetak.

1. Matikan pencetak dan cabut kabel kuasa.
2. Buka penutup kertas.
3. Wait for the print head to cool down if the printer has been recently used.
4. Lap perlahan permukaan kepala cetakan terma dengan kapas dengan perlahan dampditambah dengan isopropil alkohol.
5. Benarkan kepala cetakan kering sepenuhnya sebelum menutup penutup dan menyambung semula kuasa.

6.2 Membersihkan Penggelek Platen

The platen roller helps feed the paper smoothly.

1. Matikan pencetak dan cabut kabel kuasa.
2. Buka penutup kertas.
3. Rotate the platen roller and wipe its surface with a soft cloth dampditambah dengan isopropil alkohol.
4. Allow it to dry before closing the cover.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

Your OCOM OCPP-88A-URL Thermal Receipt Printer comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official OCOM webtapak untuk terma dan syarat jaminan terperinci.

For technical support, service, or inquiries, please contact OCOM customer service through their official website or the contact information provided in your product documentation. When contacting support, please have your printer's model number (OCPP-88A-URL) and serial number ready.