Wilo 4190420

Wilo Star S 33 FC Circulating Pump User Manual

Model: 4190420

1. Pengenalan

The Wilo Star S 33 FC 4190420 is a three-speed hydronic radiant floor circulating pump designed for efficient water circulation in various heating applications. Its robust cast iron housing and built-in motor protection ensure long life and reliable performance. This pump is suitable for closed-loop radiant heating, snow melting systems, baseboard, radiator, and fan coil heating applications.

Ciri-ciri utama termasuk:

2. Maklumat Keselamatan

AMARAN: To reduce the risk of electric shock, consult the instruction manual for proper installation and operation. Always disconnect power before servicing the pump.

PERHATIAN: The pump surface can become PANAS during operation. Avoid direct contact to prevent burns. Allow the pump to cool before handling or performing maintenance.

3. Produk Lebihview dan Komponen

Wilo Star S 33 FC Circulating Pump, green cast iron body with black electrical box and control dial.

Figure 1: Wilo Star S 33 FC Circulating Pump. This image shows the main body of the pump, its electrical connection box, and the speed selection dial. The green cast iron housing is visible, along with the product label detailing specifications and warnings.

The Wilo Star S 33 FC pump consists of several key components:

4. Pemasangan dan Persediaan

Proper installation is crucial for the pump's performance and longevity. Refer to local plumbing and electrical codes.

  1. Pemasangan: Securely mount the pump using its fixed flanges in the designated location within your hydronic system. Ensure the pump is installed in a horizontal position with the motor shaft horizontal to prevent air pockets.
  2. Sambungan Paip: Connect the system piping to the pump's flanges. Use the provided gaskets (O-rings) to ensure a watertight seal. Avoid overtightening connections.
  3. Pendawaian elektrik:
    • Ensure the power supply is disconnected before wiring.
    • Connect the pump to a 115-Volt (AC), 60Hz power supply. The pump draws a maximum of 1.5A.
    • Follow the wiring diagram provided inside the electrical connection box.
    • Pastikan pembumian yang betul untuk mengelakkan bahaya elektrik.
  4. System Filling and Purging: After installation, fill the hydronic system with water and thoroughly purge any air from the system. Air in the system can cause noise and reduce pump efficiency.

5. Arahan Operasi

The Wilo Star S 33 FC features a three-speed motor, allowing you to adjust the pump's performance to match your system's requirements.

  1. Hidupkan kuasa: Once installed and the system is filled, restore power to the pump.
  2. Pemilihan Kelajuan: Locate the speed selection dial on the front of the pump (refer to Figure 1). The dial has settings for "max", "3", "2", "1", and "eco".
    • Kelajuan 3 (Maks): Provides the highest flow rate and pressure. Power consumption is approximately 202W.
    • Kelajuan 2: Medium flow rate and pressure. Power consumption is approximately 143W.
    • Speed 1 (Eco): Lowest flow rate and pressure, designed for energy efficiency. Power consumption is approximately 98W.
    Rotate the dial to select the desired speed setting. The optimal speed depends on your specific heating system's design and heat load requirements. Start with a lower speed and increase if insufficient circulation is observed.
  3. Injap Semak: The built-in check valve can be removed if not required by your system design. Consult your HVAC professional if unsure.

6. Penyelenggaraan

The Wilo Star S 33 FC pump is designed for minimal maintenance. However, periodic checks can ensure optimal performance and extend its lifespan.

7. Penyelesaian masalah

Rujuk jadual berikut untuk isu lazim dan potensi penyelesaiannya.

MasalahKemungkinan PuncaPenyelesaian
Pam tidak bermulaNo power supply; Motor overload; Impeller jammed.Check power connection and circuit breaker; Allow motor to cool; Disconnect power and check for obstructions in impeller.
Aliran tidak mencukupiAir in system; Incorrect speed setting; Clogged filter/piping.Purge air from system; Increase speed setting; Check and clean filters or piping.
Operasi bisingAir in system; Cavitation; Loose mounting.Purge air from system; Ensure adequate system pressure; Check mounting bolts for tightness.
Kebocoran pamLoose connections; Damaged gaskets/seals.Tighten connections; Replace gaskets or seals.

If the problem persists after attempting these solutions, contact a qualified service technician or Wilo customer support.

8. Spesifikasi

AtributPerincian
Nombor Model4190420
JenamaWilo
bahanBesi tuang
Voltage115 Volt (AC)
Kekerapan60 Hz
Cabutan Semasa Maks1.5 Amps
Power Consumption (Speed 3)202 Watt
Power Consumption (Speed 2)143 Watt
Power Consumption (Speed 1/Eco)98 Watt
Berat Barang9.46 paun (4.3 Kilogram)
Dimensi Pakej7.4 x 7.24 x 5.12 inci
Kelas KepunganCSA enclosure 2
Kelas PenebatKelas F
Maks. Suhu Air230°F (110°C)
Maks. Tekanan Kerja145 PSI (10 bar)
PensijilanUL/CSA disenaraikan

9. Waranti dan Sokongan

Wilo products are manufactured to high standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Wilo webtapak.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Wilo customer service. Contact information can typically be found on the Wilo webtapak atau pada resit pembelian anda.

Wilo Official Webtapak: www.wilo.com

Dokumen Berkaitan - 4190420

Praview Wilo-Star RS, RSD, ST, RSG, Arahan Pemasangan dan Operasi AC
Panduan komprehensif untuk pemasangan, operasi dan penyelenggaraan pam edaran Wilo-Star RS, RSD, ST, RSG dan AC. Meliputi keselamatan, spesifikasi teknikal, pemasangan, sambungan elektrik, operasi, penyelesaian masalah dan alat ganti.
Praview Wilo-Star RS, RSD, ST, RSG, Arahan Pemasangan dan Operasi Pam Edaran AC
Arahan pemasangan dan operasi yang komprehensif untuk pam edaran Wilo-Star RS, RSD, ST, RSG dan AC. Meliputi maklumat umum, garis panduan keselamatan, pengangkutan, penyimpanan, perihalan pam, aksesori, pemasangan, sambungan elektrik, operasi, penyelenggaraan, penyelesaian masalah dan alat ganti.
Praview Wilo-Star RS, RSD, ST, RSG, Arahan Pemasangan dan Operasi Pam Edaran AC
Arahan pemasangan dan pengendalian yang komprehensif untuk pam edaran Wilo-Star RS, RSD, ST, RSG, AC, meliputi maklumat am, keselamatan, pengangkutan, perihalan, pemasangan, pemasangan, sambungan elektrik, operasi, penyelenggaraan dan penyelesaian masalah.
Praview Wilo-Yonos PICO: Arahan Pemasangan dan Pengendalian
Panduan ringkas untuk memasang dan mengendalikan pam edaran Wilo-Yonos PICO. Meliputi keselamatan, pemasangan dan operasi untuk sistem pemanasan air panas. Manual penuh tersedia dalam talian.
Praview Wilo-Star-Z 15 Installation and Operating Instructions
This document provides comprehensive installation, operation, and maintenance guidance for the Wilo-Star-Z 15 circulating pump. It includes safety warnings, technical specifications, intended use, troubleshooting steps, and contact information for Wilo USA and Wilo Canada.
Praview Wilo Star Residential Wet Rotor Circulators: Installation and Operating Instructions
Comprehensive installation and operating instructions for Wilo Star Residential Wet Rotor Circulators. Covers safety, technical data, installation, electrical connection, startup, maintenance, and troubleshooting.