AeroCool Bolt Mini

Manual Pengguna Sarung Permainan PC Aerocool Bolt Mini MATX RGB

Model: Bolt Mini (ACCS-PV20013.11)

1. Produk Lebihview

The AeroCool Bolt Mini is a high-performance mini tower PC case designed for MATX and Mini-ITX motherboards. It features a stylish Lightning Bolt RGB LED design on the front panel, a full tempered glass side panel, and a carbon fiber style front panel, offering a modern aesthetic for your gaming setup.

Ciri-ciri utama termasuk:

  • Pencahayaan RGB Dinamik: 13 preset lighting modes, including 6 RGB flow modes and 7 static color modes, controllable via an LED button.
  • Panel Sisi Kaca Terbaja: A full tempered glass side panel allows for a clear view komponen dalaman anda.
  • Penyejukan Dioptimumkan: Supports air cooling configurations with optional fan placements at the front (2x 120mm), top (2x 120mm), and rear (1x 120mm included). Liquid cooling support for 120mm radiators at the front and rear.
  • Reka Bentuk Futuristik: Carbon fiber style front panel for a sleek and modern appearance.

2. Persediaan dan Pemasangan

This section provides guidance on setting up your AeroCool Bolt Mini case and installing components.

2.1 Physical Dimensions and Compatibility

  • Dimensi (LxWxH): Lebih kurang 15.43 x 7.91 x 14.96 inci (39.2 x 20.1 x 38.0 cm).
  • Keserasian Papan Induk: Supports Mini-ITX and Micro-ATX motherboards.
  • Power Supply Mounting: Bottom mount.

2.2 Pemasangan Komponen

Before beginning installation, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation instructions.

Aerocool Bolt Mini PC Case Front View

Rajah 2.1: Depan kiri view of the AeroCool Bolt Mini case, showcasing the tempered glass side panel and the RGB LED strip on the front.

Aerocool Bolt Mini PC Case Interior View

Rajah 2.2: Dalaman view of the AeroCool Bolt Mini case, showing the motherboard mounting area, drive bays, and the pre-installed rear fan.

Aerocool Bolt Mini PC Case Front and Rear View

Rajah 2.3: Depan dan belakang view of the AeroCool Bolt Mini case, highlighting the carbon fiber style front panel and the rear I/O and fan mounting.

Aerocool Bolt Mini PC Case Top I/O Panel

Rajah 2.4: Atas view of the AeroCool Bolt Mini case, showing the front I/O panel with USB ports and audio jacks.

2.2.1 Pemasangan Motherboard

  1. Keluarkan panel sisi.
  2. Pasangkan pelindung I/O ke dalam bukaan belakang bekas.
  3. Align your Micro-ATX or Mini-ITX motherboard with the standoffs and gently place it into position.
  4. Selamatkan papan induk dengan skru.

2.2.2 Pemasangan Pemacu Storan

Sarung ini menyokong pelbagai konfigurasi storan. Rujuk susun atur dalaman untuk lokasi ruang pemacu tertentu.

2.2.3 Pemasangan Bekalan Kuasa

Install your ATX power supply into the bottom mounting area of the case. Secure it with screws from the rear.

2.2.4 Cooling System Installation

The case comes with one 120mm black fan pre-installed at the rear. Additional fans or radiators can be installed as follows:

  • Depan: Supports 2 x 120mm fans or a 120mm radiator.
  • Atas: Menyokong 2 kipas x 120mm.
  • belakang: Supports 1 x 120mm fan (included) or a 120mm radiator.

3. Arahan Operasi

3.1 I/O Panel Hadapan

The top front panel provides convenient access to essential ports and controls:

  • Butang Kuasa: To turn your system on or off.
  • Butang Tetapkan Semula: To restart your system.
  • Port USB: Includes USB 2.0 ports for connecting peripherals.
  • Bicu Audio: Untuk fon kepala dan mikrofon.

3.2 Kawalan Pencahayaan RGB

The AeroCool Bolt Mini features an integrated RGB LED strip on the front panel with 13 lighting modes. These modes can be cycled using the dedicated LED control button located on the top panel.

  • 6 RGB Flow Modes: Dynamic lighting effects that cycle through colors.
  • 7 Static Color Modes: Solid color illumination (e.g., Red, Green, Blue, Yellow, Cyan, Purple, White).

Press the LED control button repeatedly to cycle through the available lighting modes. Hold the button for a few seconds to turn off the RGB lighting.

4. Penyelenggaraan

Regular maintenance helps ensure the longevity and optimal performance of your PC case and components.

4.1 Membersihkan Kes

  • Luaran: Gunakan yang lembut, damp kain untuk mengelap permukaan luar. Elakkan pembersih atau pelarut yang kasar.
  • Panel Kaca Terbaja: Clean the tempered glass with a glass cleaner and a microfiber cloth to prevent streaks. Do not apply excessive force.
  • Penapis Habuk: Periodically remove and clean any dust filters (e.g., top magnetic filter, PSU filter) to maintain good airflow. Rinse with water if necessary and ensure they are completely dry before reinstallation.
  • Dalaman: Use compressed air to blow out dust from inside the case, especially around fans and components. Ensure the system is powered off and unplugged before cleaning the interior.

5. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi dengan sarung PC anda.

5.1 RGB Lighting Not Functioning

  • Semak Sambungan: Ensure the RGB LED strip is properly connected to the case's internal controller and that the controller is powered (usually via a SATA power connector from your PSU).
  • Butang LED: Press the LED control button to cycle through modes. If it's unresponsive, check the button's internal connection to the controller.
  • Kitaran Kuasa: Turn off your PC, unplug it from the wall, wait 30 seconds, then plug it back in and restart.

5.2 Poor Airflow or Overheating

  • Clean Dust Filters: Ensure all dust filters are clean and not obstructed.
  • Orientasi Peminat: Verify that installed fans are oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top).
  • Pengurusan Kabel: Poor cable management can obstruct airflow. Reroute cables behind the motherboard tray where possible.
  • Add More Fans: Consider installing additional fans in available mounting locations to improve cooling.

5.3 Front Panel Ports Not Working

  • Check Motherboard Connections: Ensure the USB and audio headers from the front panel are securely connected to the correct pins on your motherboard.
  • Isu Pemandu: For audio, ensure your motherboard's audio drivers are up to date.

6. Spesifikasi

Ciri Perincian
Nama Model Bolt Mini
Nombor Model Item ACCS-PV20013.11
Jenama AeroCool
Jenis Kes Menara Mini
Keserasian Papan Induk Mini ITX, Micro ATX
Dimensi (LxWxH) 15.43 x 7.91 x 14.96 inci (39.2 x 20.1 x 38.0 cm)
Berat Barang 8.03 paun (3.64 kg)
bahan Tempered Glass (Side Panel)
Panel Depan I / O Power, Reset, USB 2.0 (x3), Audio In/Out
Kaedah Penyejukan Air, Water
Sokongan Peminat Front: 2x 120mm (Optional), Top: 2x 120mm (Optional), Rear: 1x 120mm (Included)
Sokongan Radiator Front: 120mm (Optional), Rear: 120mm (Optional)
Jenis Pemasangan Bekalan Kuasa Pelekap Bawah
Warna Cerah Changeable (RGB)
Penggunaan yang Disyorkan Permainan

7. Waranti dan Sokongan

AeroCool products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official AeroCool webtapak.

For technical support, troubleshooting assistance, or inquiries regarding your AeroCool Bolt Mini case, please contact AeroCool customer service through their official support channels.

Pengeluar: Aerocool

Jenama: AeroCool

Dokumen Berkaitan - Bolt Mini

Praview Manual Pengguna Sarung Komputer Aerocool Rift BG Miditower
Manual pengguna untuk sarung komputer Aerocool Rift BG Miditower. Panduan ini menyediakan spesifikasi, arahan pemasangan dan maklumat hubungan sokongan untuk sarung PC kaca terbaja hitam.
Praview Panduan Pemasangan Sarung PC Mini AeroCool Cylon
Panduan pemasangan komprehensif untuk sarung PC Mini AeroCool Cylon, meliputi pemasangan komponen, sambungan panel hadapan dan tetapan mod LED.
Praview Panduan Pemasangan Sarung PC Aerocool Ore - Pemasangan Langkah demi Langkah
Manual pemasangan yang komprehensif untuk sarung PC Aerocool Ore Miditower (model ORE FRGB-G-BK-V1). Meliputi papan induk, PSU, kad tambahan, pemacu storan (SSD/HDD) dan pemasangan kipas/radiator. Termasuk butiran panel I/O dan panduan aksesori.
Praview AeroCool B310A Flow Mini Tower Case Installation Guide and Safety Information
Comprehensive guide for installing the AeroCool B310A Flow Mini Tower Case, including component mounting, I/O connections, fan and radiator support, and essential safety warnings for safe assembly and use.
Praview Panduan Pemasangan Casing Komputer AeroCool FLO
Panduan komprehensif untuk memasang komponen ke dalam bekas PC AeroCool FLO, meliputi papan induk, PSU, pemacu storan, kad pengembangan dan penyelesaian penyejukan.
Praview AeroCool Hive Computer Case Installation Guide
Comprehensive installation guide for the AeroCool Hive computer case, detailing motherboard, PSU, SSD, radiator, and fan mounting, along with front panel I/O connections and controls.