DS18 PRO-X6.4BMPK Car Speaker Package Instruction Manual

pengenalan

Thank you for choosing the DS18 PRO-X6.4BMPK Car Speaker Package. This manual provides essential information for the proper installation, operation, and maintenance of your new car audio components. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and safety.

Image: The complete DS18 PRO-X6.4BMPK package, showcasing two 6.5-inch midrange speakers and two 1-inch tweeters.

Maklumat Keselamatan

To prevent injury or damage to the product, observe the following safety precautions:

• Sentiasa putuskan sambungan terminal negatif bateri kenderaan sebelum memulakan sebarang kerja elektrik.
• Pastikan semua pendawaian mempunyai penebat yang betul untuk mengelakkan litar pintas.
• Mount speakers securely to prevent them from becoming projectiles in the event of a sudden stop or collision.
• Avoid prolonged exposure to very high volume levels, which can cause permanent hearing damage.
• Jika anda tidak pasti tentang sebarang langkah pemasangan, rujuk pemasang audio kereta profesional.

Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

• 2 x DS18 PRO-X6.4BM 6.5-inch Midrange Loudspeakers
• 2 x DS18 PRO-TWX1 1-inch Super Tweeters (with built-in capacitor filters)

Image: A pair of DS18 6.5-inch midrange speakers and a pair of 1-inch tweeters, as included in the package.

Persediaan dan Pemasangan

Proper installation is crucial for the performance and longevity of your speakers. Consider professional installation if you are not familiar with car audio wiring.

Mounting the Midrange Speakers

1. Choose a suitable location in your vehicle, typically door panels, that can accommodate the 6.5-inch diameter and mounting depth.
2. Ensure there is sufficient clearance behind the speaker for the magnet structure and proper air movement.
3. Use the provided mounting hardware to securely fasten the midrange speakers. Avoid over-tightening screws.

Imej: A terperinci view of the DS18 6.5-inch PRO-X midrange speaker, highlighting its cone and surround.

Memasang Tweeter

1. Select a location for the tweeters that allows for optimal sound dispersion, such as A-pillars or dashboard corners.
2. The tweeters can be flush-mounted or surface-mounted depending on your vehicle and preference.
3. Drill necessary holes carefully, ensuring no damage to existing wiring or vehicle components.
4. Secure the tweeters using the appropriate mounting accessories.

Image: A close-up of the DS18 1-inch PRO-TWX1 tweeter, showing its compact design and integrated capacitor for high-pass filtering.

Sambungan Pendawaian

The PRO-TWX1 tweeters feature a built-in capacitor that acts as a high-pass filter, eliminating the need for an external crossover for the tweeter. Connect the midrange and tweeter in parallel to a single ampsaluran penguat.

• Connect the positive (+) terminal of the midrange speaker to the positive (+) output of your ampsaluran penguat.
• Connect the negative (-) terminal of the midrange speaker to the negative (-) output of your ampsaluran penguat.
• Connect the positive (+) terminal of the tweeter to the same positive (+) output of your ampsaluran penguat.
• Connect the negative (-) terminal of the tweeter to the same negative (-) output of your ampsaluran penguat.
• Ensure all connections are secure and free from corrosion. Use appropriate gauge speaker wire.

Penting: The combined impedance of the midrange and tweeter connected in parallel will be lower than the individual speaker impedance. Ensure your amplifier is stable at the resulting load. For example, two 4-ohm speakers in parallel result in a 2-ohm load.

Arahan Operasi

Once installed, follow these guidelines for optimal performance:

• Kuasa Permulaan: Mulakan dengan anda amplifier's gain settings at their lowest. Gradually increase the volume from your head unit.
• Pelarasan Keuntungan: Carefully adjust the amplifier gain. The goal is to match the amplifier's output to the head unit's output without introducing distortion. Do not use the gain control as a volume knob.
• Tetapan Crossover: Jika anda amplifier or head unit has adjustable crossover settings, a high-pass filter for the midrange speakers is recommended to protect them from low bass frequencies. A common starting point is 80-100 Hz. The tweeters have a built-in high-pass filter.
• Tahap Mendengar: Avoid playing audio at excessively high volumes for extended periods to prevent speaker damage and hearing loss.

Penyelenggaraan

Your DS18 speakers require minimal maintenance:

• Pembersihan: Use a soft, dry cloth to gently wipe away dust from the speaker cones and surrounds. Avoid using harsh chemicals or excessive moisture.
• Pemeriksaan: Periodically check speaker grilles and mounting points for any signs of looseness or damage. Ensure wiring connections remain secure.
• Faktor Persekitaran: Protect speakers from extreme temperatures and direct exposure to water or excessive humidity.

Menyelesaikan masalah

Jika anda menghadapi masalah dengan pembesar suara anda, rujuk masalah dan penyelesaian biasa berikut:

Spesifikasi

Detailed technical specifications for the DS18 PRO-X6.4BMPK package components:

Image: Back label of the DS18 PRO-X6.4BM 6.5-inch midrange loudspeaker, showing key specifications.

Image: Back label of the DS18 PRO-TWX1/BK tweeter, displaying its power handling and impedance.

Waranti dan Sokongan

DS18 products are designed for durability and performance. This product comes with a limited warranty.

• Perlindungan Waranti: The specific terms and duration of the limited warranty are provided at the time of purchase or can be found on the official DS18 webtapak. Sila simpan bukti pembelian anda untuk tuntutan waranti.
• Sokongan Teknikal: For technical assistance, installation questions, or troubleshooting beyond this manual, please contact DS18 customer support directly. Refer to the DS18 official webtapak untuk maklumat hubungan.