pengenalan
This manual provides essential instructions for the safe operation, assembly, maintenance, and troubleshooting of your FERM MSM1038 255mm Radial Mitre Saw. Please read this manual thoroughly before using the tool to ensure proper and safe usage.
Arahan Keselamatan
Sentiasa ikuti langkah berjaga-jaga keselamatan asas untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan diri. Simpan manual ini untuk rujukan masa hadapan.
- Pakai peralatan pelindung diri (PPE) yang sesuai seperti cermin mata keselamatan dan pelindung pendengaran.
- Pastikan kawasan kerja bersih, terang dan bebas daripada halangan.
- Jauhkan kanak-kanak dan orang ramai dari kawasan operasi.
- Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
- Always unplug the saw from the power source before making adjustments, changing accessories, or performing maintenance.
- Secure the workpiece firmly with a clamp sebelum dipotong.
- Use only sharp, correctly sized saw blades suitable for the material being cut.
- Jangan sekali-kali sampai ke kawasan bilah semasa gergaji sedang berjalan atau disambungkan kepada kuasa.
Kandungan Pakej
Sahkan bahawa semua item ada semasa membongkar:
- 1 x FERM MSM1038 Radial Mitre Saw
- 1 x Mata Gergaji TCT (80 gigi)
- 1 x Workpiece Clamp
- 1 x Beg Habuk
- 1 x Hex Key (for blade changes/adjustments)
- 1 x Gogal Keselamatan
- 1 x Ear Plugs
- Manual Arahan
Image: The FERM MSM1038 Radial Mitre Saw, showcasing its main components along with the included safety goggles, ear plugs, and hex key for assembly and maintenance.
Produk Selesaiview
Familiarize yourself with the main parts of the FERM MSM1038 Mitre Saw:
- Handle with Trigger Switch: Ergonomically designed for control and safety.
- Pengawal Bilah: Transparent guard for visibility and protection.
- Bilah Gergaji: 255mm TCT blade for efficient cutting.
- Mitre Table: Base for workpiece support, adjustable for angle cuts.
- Bahan kerja Clamp: Secures material during cutting.
- Pelabuhan Pengekstrakan Habuk: Connects to a dust bag or vacuum system.
- Panduan Laser: Mengunjurkan garisan untuk pemotongan yang tepat.
- Pelarasan Serong: Allows for angled cuts on the vertical axis.
- Radial Slide Mechanism: Extends cutting capacity for wider workpieces.
Imej: Perincian view of the saw's handle, trigger, and the transparent blade guard covering the saw blade.
Imej: View of the mitre table with angle markings, the workpiece clamp, and the laser guide mechanism.
Persediaan
1. Membongkar dan Pemeriksaan
Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during transit. Do not operate the saw if any damage is observed.
2. Mounting the Saw
For stability and safety, it is recommended to securely mount the mitre saw to a workbench or a dedicated mitre saw stand using appropriate bolts and nuts (not included). Ensure the mounting surface is stable and level.
3. Memasang Bilah Gergaji
- Putuskan sambungan gergaji daripada bekalan kuasa.
- Angkat pelindung bilah bawah.
- Tekan butang kunci gelendong untuk mengelakkan bilah daripada berputar.
- Use the provided hex key to loosen the blade retaining bolt.
- Tanggalkan bebibir luar dan bilah lama.
- Place the new blade onto the spindle, ensuring the rotation arrow on the blade matches the arrow on the blade guard.
- Reinstall the outer flange and tighten the blade retaining bolt securely.
- Release the spindle lock and lower the blade guard.
4. Memasang Beg Habuk
Attach the dust bag to the dust extraction port located at the rear of the blade guard assembly. Ensure it is securely fitted to collect sawdust during operation.
Arahan Operasi
1. Sambungan Kuasa
Connect the saw to a 230V, 50Hz power outlet. Ensure the power cord is not damaged and is routed safely away from the cutting path.
2. Adjusting Mitre Angle
To adjust the horizontal cutting angle (mitre), loosen the mitre lock knob. Rotate the mitre table to the desired angle (up to 45 degrees left or right), then tighten the lock knob firmly. Common angles like 0°, 15°, 22.5°, 30°, and 45° often have detents for quick setting.
Imej: Terperinci view of the mitre angle scale on the saw's base, showing markings for various angles and the adjustment mechanism.
3. Melaraskan Sudut Serong
To adjust the vertical cutting angle (bevel), loosen the bevel lock lever. Tilt the saw head to the desired angle (typically up to 45 degrees to one side), then secure the lever. Refer to the bevel scale for precise angle settings.
4. Menggunakan Panduan Laser
Activate the laser guide by pressing its dedicated switch. The laser projects a line onto the workpiece, indicating the exact cutting path of the blade. Align your cut line with the laser for improved accuracy.
5. Securing the Workpiece
Always use the workpiece clamp to firmly secure the material against the fence and the mitre table. This prevents movement during cutting, ensuring safety and accuracy.
6. Membuat Potongan
- Pastikan bahan kerja berada dalam keadaan selamatamped and the desired angles are set.
- Hold the saw handle firmly.
- Press the trigger switch to start the motor and allow the blade to reach full speed.
- Slowly lower the saw blade into the workpiece, applying steady, even pressure. For radial cuts, pull the saw head forward, lower it, and push it back through the material.
- Setelah potongan selesai, lepaskan suis picu dan biarkan bilah berhenti sepenuhnya sebelum mengangkat kepala gergaji.
- Remove the cut workpiece.
Penyelenggaraan
1. Pembersihan
Regularly clean the saw to remove sawdust and debris. Use a brush or compressed air. Ensure the ventilation openings are clear. Do not use solvents or abrasive cleaners.
2. Blade Inspection and Replacement
Inspect the saw blade before each use for sharpness and damage. A dull or damaged blade can cause kickback and poor cut quality. Replace blades as described in the "Setup" section when necessary.
3. Pelinciran
Periodically apply a small amount of light machine oil to the radial slide mechanism to ensure smooth operation. Avoid over-lubrication.
4. Berus Karbon
The carbon brushes may need replacement after extended use. Consult a qualified service technician for carbon brush inspection and replacement.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Saw tidak bermula | Tiada bekalan kuasa; Suis rosak; Berus karbon usang | Check power connection; Inspect switch; Have carbon brushes checked by technician |
| Kualiti potongan yang buruk / Pengikat bilah | Dull or incorrect blade; Workpiece not secured; Incorrect feed rate | Replace blade; Secure workpiece firmly; Adjust feed rate |
| Getaran yang berlebihan | Bilah longgar; Bilah rosak; Pemasangan tidak stabil | Tighten blade bolt; Replace blade; Securely mount saw |
| Panduan laser tidak berfungsi | Laser switch off; Laser lens dirty; Laser module fault | Turn on laser switch; Clean laser lens; Contact service for module replacement |
Spesifikasi
- model: MSM1038
- Input Kuasa: 1900W
- Sesalur Voltage: 230V
- Kekerapan: 50Hz
- Tiada Kelajuan Muatan: 4800/min (RPM)
- Diameter Mata Gergaji: 255mm
- Bilangan Gigi: 80
- Max. Cutting Capacity (0°/0°): 70 x 310 mm
- Max. Cutting Capacity (45° Mitre/0° Bevel): 70 x 210 mm
- Max. Cutting Capacity (0° Mitre/45° Bevel): 40 x 310 mm
- Max. Cutting Capacity (45° Mitre/45° Bevel): 40 x 210 mm
- Sudut Miter: 0° hingga 45° Kiri/Kanan
- Sudut Serong: 0° hingga 45° Kiri
- Berat Barang: 14.3 kg
- Dimensi Produk: 70 x 40 x 50 cm
Waranti dan Sokongan
This FERM MSM1038 Radial Mitre Saw comes with a Waranti 6 Bulan dari tarikh pembelian. Sila simpan bukti pembelian anda untuk tuntutan waranti.
For technical assistance, spare parts, or warranty service, please contact your local FERM authorized service center or the retailer where the product was purchased. Do not attempt to repair the tool yourself, as this may void the warranty and pose safety risks.
