Tempur-Pedic 1539761 Mesh Back Fabric Task Chair User Manual

pengenalan

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Tempur-Pedic 1539761 Mesh Back Fabric Task Chair. Please read these instructions carefully before use to ensure proper function and longevity of your product.

Maklumat Keselamatan Penting

• Jangan melebihi kapasiti berat maksimum bagi 250 paun (113 kg). Exceeding this limit may cause damage to the chair or personal injury.
• Pastikan semua bolt dan skru diketatkan dengan selamat sebelum digunakan dan periksa kekejangan secara berkala.
• Pastikan tangan dan jari bebas daripada bahagian yang bergerak semasa pelarasan.
• Gunakan kerusi di atas permukaan yang rata untuk mengelakkannya daripada terbalik.

Produk Selesaiview

The Tempur-Pedic 1539761 Mesh Back Fabric Task Chair is designed for comfort and support in an office environment. Key features include a breathable mesh back, a plush Tempur foam seat cushion, adjustable armrests, and a robust five-star nylon base with rolling casters.

Rajah 1: Depan view of the Tempur-Pedic 1539761 Mesh Back Fabric Task Chair. This image displays the chair's overall design, including the mesh back, fabric seat, and adjustable armrests.

Persediaan dan Perhimpunan

Assembly typically requires two people and approximately 30-60 minutes. Ensure all components are present before beginning. Refer to the included assembly diagram for detailed visual instructions.

1. Pasang Kastor ke Pangkalan: Masukkan lima roda pemukul ke dalam lubang di hujung setiap kaki tapak lima bintang. Tolak dengan kuat sehingga ia klik pada tempatnya.
2. Masukkan Pengangkat Gas: Letakkan silinder pengangkat gas ke dalam lubang tengah pangkalan lima bintang.
3. Assemble Seat and Back: Attach the backrest to the seat mechanism using the provided hardware. Ensure all screws are tightened securely.
4. Pasang tempat letak tangan: Pasangkan tempat letak tangan pada pemasangan tempat duduk. Note: Pay close attention to the visual diagrams for armrest orientation, as printed arrows may sometimes be misleading. Ensure the armrests are positioned correctly for comfortable use.
5. Sambungkan Tempat Duduk ke Lif Gas: Carefully place the assembled seat and back onto the gas lift cylinder, ensuring it is centered and stable.

Figure 2: Chair dimensions. This image illustrates the overall height (44.1 inches), width (27.95 inches), and depth (27.2 inches) of the assembled chair.

Arahan Operasi

Your chair features several adjustable components to customize your seating experience.

1. Pelarasan Ketinggian Tempat Duduk

Untuk menyesuaikan ketinggian tempat duduk:

• To raise the seat, lift the pneumatic seat-height adjustment lever (typically located on the right side, under the seat) while taking your weight off the seat.
• To lower the seat, lift the same lever while remaining seated.

2. Pelarasan Tempat Letak Tangan

The armrests are both width and height adjustable:

• Pelarasan Ketinggian: Press the button located on the side of each armrest support and slide the armrest up or down to your desired height. Release the button to lock.
• Pelarasan Lebar: Loosen the knobs or levers located underneath the seat, near the armrest attachment points, to slide the armrests inward or outward. Retighten to secure.

3. Synchro-Tilt Mechanism (Recline, Tension, Lock)

The synchro-tilt mechanism allows the backrest and seat to recline in a synchronized motion.

• Bersandar: To recline, lean back in the chair.
• Ketegangan Condongkan: Adjust the round knob located underneath the seat, usually at the front. Turn clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline). Note: This knob can be stiff; apply firm, steady pressure.
• Kunci Condong: To lock the chair in an upright or reclined position, push the lever (often the same as the height adjustment lever, pushed inward) to engage the lock. Pull the lever outward to unlock and allow reclining.

4. Sokongan Lumbar

The chair includes integrated lumbar support. This support can be adjusted vertically (up and down) to better fit the curve of your lower back. Locate the adjustment mechanism on the back of the chair and slide it to your preferred height.

Rajah 3: Belakang view of the chair. This image highlights the mesh backrest and the visible lumbar support adjustment mechanism.

Penyelenggaraan

• Pembersihan: For the fabric seat and mesh back, use a damp kain dan sabun lembut untuk pembersihan kotoran. Elakkan bahan kimia yang keras atau pembersih yang kasar.
• Pemeriksaan: Periksa semua skru dan bolt secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu untuk mengekalkan kestabilan dan keselamatan.
• Kastor: Pastikan roda bebas daripada serpihan (rambut, habuk) untuk memastikan penggelekkan yang lancar.

Menyelesaikan masalah

Spesifikasi

• Jenama: Tempur-Pedic
• Nombor Model: 1539761
• warna: Hitam
• Dimensi (Keseluruhan): 27.2" (Depth) x 27.95" (Width) x 44.1" (Height)
• Kedalaman Tempat Duduk: 20.1 inci
• Berat Barang: 58.7 paun
• Kapasiti Berat: Sehingga 250 lbs
• Gaya Belakang: Belakang Jaring
• Bahan Isi: Foam (Tempur foam)
• Ciri Khas: Arm Rest, Cushion Availability, Lumbar Support, Synchro-Tilt Mechanism
• Penjagaan Produk: Bersih Tempat

Waranti dan Sokongan

For warranty information, replacement parts, or further assistance, please contact Tempur-Pedic customer support. You can often find contact details on the manufacturer's webtapak atau melalui tempat pembelian anda.

Lawati pegawai Tempur-Pedic Store untuk maklumat lanjut produk.