pengenalan
The 8Bitdo M30 2.4G Wireless Gamepad is designed to provide a classic gaming experience with modern wireless convenience. This controller is specifically engineered for compatibility with the SEGA Genesis Mini, Mega Drive Mini, and Nintendo Switch consoles, offering a redefined 6-button layout for optimal gameplay. Its 2.4G wireless technology ensures a stable and responsive connection, enhancing your gaming sessions.
Panduan Persediaan
Apa yang ada dalam Kotak
- 8Bitdo M30 2.4G Controller
- Penerima Wayarles 2.4G
- Kabel Pengecas USB
Image: The 8Bitdo M30 2.4G Wireless Gamepad shown alongside its compact 2.4G USB receiver.
Mengecas Pengawal
The M30 controller features a built-in rechargeable battery. To charge, connect the supplied USB cable to the controller's micro USB port and the other end to a USB power source (e.g., a computer USB port or a USB wall adapter). The LED indicator on the controller will show charging status.
Connecting to SEGA Genesis Mini / Mega Drive Mini
- Plug the 2.4G wireless receiver into an available USB port on your SEGA Genesis Mini or Mega Drive Mini console.
- Press the Start button on the M30 controller to power it on. The controller will automatically connect to the receiver.
Connecting to Nintendo Switch
- Ensure your Nintendo Switch is docked. Plug the 2.4G wireless receiver into an available USB port on the Switch dock.
- On your Nintendo Switch, navigate to Tetapan Sistem > Pengawal dan Penderia > Komunikasi Berwayar Pengawal Pro and set this option to On. This step is crucial for the controller to function correctly with the Switch.
- Press the Start button on the M30 controller to power it on. The controller will automatically connect to the receiver and be recognized as a Pro Controller by the Switch.
Image: A user demonstrates playing a game on a Sega Genesis Mini console using the 8Bitdo M30 2.4G Wireless Gamepad.
Arahan Operasi
Kawalan Asas
The M30 controller features a classic 6-button layout, a D-pad, and Start/Mode buttons. Familiarize yourself with the button placement for optimal gameplay.
Fungsi Turbo
The controller supports a Turbo function for rapid button presses. Please note that the Turbo function is unavailable when connected to the Nintendo Switch. Refer to the specific instructions provided with the controller for activating and deactivating Turbo mode for other compatible systems.
Button Swapping (A/B and X/Y)
For enhanced compatibility and personal preference, you can swap the functions of the A/B and X/Y buttons. To do this, hold down the D-pad Ke Bawah butang dan Pilih button simultaneously for approximately 5 seconds. This will toggle the button mapping.
Quick Menu Access (Genesis Mini / Mega Drive Mini)
When playing on the SEGA Genesis Mini or Mega Drive Mini, the M30 controller allows for quick access to the console's system menu. This feature provides immediate access to options such as saving game progress, loading states, or returning to the main menu, without needing to press and hold the Start button for an extended period.
Hidupkan/Mati Kuasa
- Hidupkan kuasa: Tekan butang Mula.
- Matikan: Hold the Start button for 3 seconds, or the controller will automatically power off after 1 minute of inactivity when not connected, or 15 minutes when connected.
Penyelenggaraan
Pembersihan
To clean your 8Bitdo M30 controller, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the controller's openings. Avoid using harsh chemicals or abrasive materials.
Penjagaan Bateri
To prolong the life of the internal lithium metal battery, avoid fully discharging it frequently. Recharge the controller when the battery indicator is low. If storing the controller for an extended period, charge it to approximately 50% capacity and store it in a cool, dry place.
Menyelesaikan masalah
Controller Not Connecting / Not Recognized
- Check Receiver Connection: Ensure the 2.4G receiver is firmly plugged into the console's USB port.
- Nintendo Switch Specific: Verify that "Pro Controller Wired Communication" is enabled in your Switch System Settings (System Settings > Controllers and Sensors > Pro Controller Wired Communication > On).
- Recharge Controller: A low battery can prevent connection. Charge the controller fully.
- Kemas kini Firmware: If issues persist, visit the official 8Bitdo support website to check for and install any available firmware updates for both the controller and the receiver.
Input Lag or Sticky Inputs
While the 2.4G wireless technology is designed for low latency, rare instances of perceived input lag or sticky inputs may occur. Ensure there are no significant wireless interferences nearby. If the issue persists, try updating the controller's firmware.
Controller Not Recognized by PC / Other Systems
The 8Bitdo M30 2.4G Wireless Gamepad is primarily designed for SEGA Genesis Mini, Mega Drive Mini, and Nintendo Switch. While it may have compatibility with other systems or emulators (e.g., RetroArch), full functionality is not guaranteed. Ensure your system's drivers are up to date and check for specific configuration guides for your intended platform.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | 6922621501015 |
| Ketersambungan | Teknologi Wayarles 2.4G |
| Keserasian | SEGA Genesis Mini, Mega Drive Mini, Nintendo Switch |
| Jenis Bateri | 1 bateri Litium Logam (termasuk, boleh dicas semula) |
| Dimensi | 6.18 x 3.9 x 1.69 inci |
| Berat Barang | 4.16 auns |
Waranti dan Sokongan
Maklumat Waranti
8Bitdo products typically come with a manufacturer's warranty covering defects in materials and workmanship. For specific warranty terms and duration, please refer to the warranty card included with your product or visit the official 8Bitdo webtapak.
Sokongan Pelanggan
For technical assistance, troubleshooting, or general inquiries, please visit the official 8Bitdo support page. You can often find FAQs, firmware updates, and contact information for customer service there.
8Bitdo rasmi Webtapak: www.8bitdo.com
