Huskie Tools REC-B6510 12 Ton Compression Tool Kit User Manual

1. Produk Lebihview

The Huskie Tools REC-B6510 is a 12-ton battery-operated compression tool designed for crimping electrical connectors. It is engineered for single-handed operation, making it suitable for overhead applications and situations where one hand is needed to manage the work piece. This tool eliminates the need for external hoses and heavy equipment, offering enhanced portability and ease of use.

Ciri-ciri utama termasuk:

• Operasi Satu Tangan: Facilitates use in challenging environments.
• Tested Up to 75kV: Ensures safety in high-voltage aplikasi.
• Rotational Head: Provides flexibility for various crimping angles.
• Rapid Advance System: Reduces crimp cycle time, increasinkecekapan g.
• Ergonomically Balanced: Designed for user comfort and reduced fatigue.
• Wide Jaw Opening: 1.65" opening accommodates mid-span copper and aluminum splices and lugs up to 750 MCM Cu/Al.
• Die Compatibility: Accepts all standard "U" type dies.
• Pintasan Automatik: A built-in 10,000 psi bypass cartridge audibly signals when optimal pressure is reached.

2. Maklumat Keselamatan Penting

Baca dan fahami semua amaran keselamatan, arahan, ilustrasi dan spesifikasi yang disediakan dengan alat kuasa ini. Kegagalan mematuhi semua arahan yang disenaraikan di bawah boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.

• Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and protective clothing.
• Pastikan kawasan kerja bersih dan terang. Kawasan yang berselerak atau gelap boleh mengundang kemalangan.
• Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Jauhkan kanak-kanak dan orang ramai semasa mengendalikan alat kuasa. Gangguan boleh menyebabkan anda hilang kawalan.
• Elakkan bermula secara tidak sengaja. Pastikan suis berada dalam kedudukan mati sebelum menyambung ke pek bateri, mengambil atau membawa alat.
• Jangan melampaui batas. Pastikan pijakan dan keseimbangan yang betul pada setiap masa. Ini membolehkan kawalan alat kuasa yang lebih baik dalam situasi yang tidak dijangka.
• Putuskan sambungan pek bateri daripada alat kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
• Gunakan alat kuasa, aksesori dan bit alat dsb. mengikut arahan ini, dengan mengambil kira keadaan kerja dan kerja yang perlu dilakukan.
• Mengekalkan alatan kuasa dan aksesori. Periksa untuk tidak jajaran atau pengikatan bahagian yang bergerak, pecah bahagian dan sebarang keadaan lain yang boleh menjejaskan operasi alat kuasa.
• Only use battery packs and chargers specified by the manufacturer.

3. Komponen Produk

Familiarize yourself with the main parts of your REC-B6510 compression tool:

Figure 1: Huskie Tools REC-B6510 12 Ton Compression Tool. This image displays the complete tool, featuring its blue and black housing, the crimping head, trigger, and battery compartment.

• Crimping Head: The front part of the tool where dies are inserted and the crimping action occurs. It features a rotational design for versatility.
• Die Retainer Pin: Secures the crimping dies in place.
• Suis Pencetus: Activates the hydraulic pump for crimping.
• Butang Kembali: Releases hydraulic pressure to retract the ram and open the dies.
• Handle/Grip: Direka secara ergonomik untuk pengendalian yang selesa dan selamat.
• Petak Bateri: Located at the base of the handle, houses the Lithium-Ion battery.
• Pek bateri: Provides power to the tool. (Not visible in main image, but implied)
• Pengecas: Used to recharge the battery pack. (Not visible in main image, but implied)

4. Persediaan dan Persediaan

4.1 Mengecas Bateri

1. Ensure the battery charger is connected to a suitable power outlet.
2. Insert the battery pack into the charger. The charger's indicator light will show the charging status.
3. Allow the battery to fully charge before first use. Refer to the charger's manual for specific charging times and indicators.
4. Setelah dicas, keluarkan bateri daripada pengecas.

4.2 Memasang Bateri

1. Ensure the tool's trigger is not engaged.
2. Align the charged battery pack with the battery compartment at the base of the tool's handle.
3. Luncurkan pek bateri dengan kuat ke tempatnya sehingga ia berbunyi klik, menunjukkan ia telah dikunci dengan selamat.
4. To remove, press the battery release button (if present) and slide the battery out.

4.3 Installing Dies

1. Pastikan alat dimatikan dan bateri ditanggalkan untuk keselamatan.
2. Retract the ram fully by pressing the return button.
3. Open the die retainer pin or mechanism on the crimping head.
4. Insert the appropriate "U" type dies for the specific connector and cable size you are working with.
5. Close and secure the die retainer pin. Ensure dies are properly seated and aligned.

5. Arahan Operasi

5.1 Pemeriksaan Pra-Operasi

• Verify the correct dies are installed for the application.
• Pastikan bateri dicas sepenuhnya dan dipasang dengan selamat.
• Inspect the tool for any visible damage or loose parts.
• Confirm the work piece (cable and connector) is clean and prepared according to manufacturer specifications.

5.2 Performing a Crimp

1. Open the crimping head by pressing the return button until the dies are fully retracted.
2. Position the cable and connector within the open dies. Ensure the connector is properly seated and aligned for the crimp.
3. If necessary, rotate the crimping head to achieve the optimal working angle.
4. Press and hold the trigger switch. The dies will advance rapidly until they contact the connector, then slow down as crimping pressure builds.
5. Continue holding the trigger until the tool's internal bypass system audibly "bypasses" (a distinct click or hiss), indicating that optimal crimping pressure has been reached.
6. Lepaskan suis pencetus.
7. Press the return button to retract the ram and open the dies.
8. Remove the crimped connector and inspect the crimp for quality and completeness.

5.3 Operasi Satu Tangan

The REC-B6510 is designed for single-handed use. This allows the operator to hold the tool with one hand while the other hand is free to position the cable or connector, particularly useful in overhead or confined spaces. Ensure a firm grip and stable footing when operating with one hand.

6. Penyelenggaraan dan Penjagaan

6.1 Pembersihan Am

• After each use, wipe down the tool with a clean, dry cloth to remove dirt, dust, and debris.
• Pay special attention to the crimping head and die areas to prevent accumulation that could affect performance.
• Do not use harsh chemicals or solvents that could damage the tool's housing or internal components.

6.2 Penjagaan dan Penyimpanan Bateri

• Simpan bateri di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
• Jangan simpan bateri dalam keadaan dinyahcas untuk tempoh yang lama. Cas semula bateri secara berkala jika tidak digunakan.
• Avoid dropping or physically damaging battery packs.
• If a battery pack becomes hot during use or charging, discontinue use and allow it to cool before handling.

6.3 Die Maintenance

• Keep dies clean and free of debris.
• Inspect dies regularly for wear, cracks, or damage. Replace worn or damaged dies immediately to ensure proper crimps.
• Lightly lubricate dies with a suitable non-conductive lubricant if recommended by the manufacturer.

6.4 Perkhidmatan Profesional

For internal repairs or hydraulic system maintenance, contact authorized Huskie Tools service centers. Attempting to service the tool yourself may void the warranty and could lead to injury or damage to the tool.

7. Penyelesaian masalah

This section addresses common issues you might encounter with your REC-B6510 tool. For problems not listed here, contact Huskie Tools customer support.

8. Spesifikasi Teknikal

9. Waranti dan Sokongan

For detailed warranty information, please refer to the warranty card included with your product or visit the official Huskie Tools webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

For technical support, service, or to order replacement parts, please contact Huskie Tools customer service:

• Webtapak: Visit the Huskie Tools Store on Amazon (untuk maklumat jenama umum)
• Refer to your product packaging or included documentation for direct contact information.