ThreeH AC10 Digital Wood Cube Alarm Clock User Manual

1. Pengenalan

This manual provides comprehensive instructions for the ThreeH AC10 Digital Wood Cube Alarm Clock. This device features a clear LED display, sound control, and multiple functions including time, date, temperature, and alarm settings. Please read this manual carefully to ensure proper operation and to fully utilize all features.

Image 1.1: The ThreeH AC10 Digital Wood Cube Alarm Clock showcasing its primary functions: Time, Alarm, Calendar, 3-Level Brightness, Temperature, and Snooze.

2. Produk Lebihview

The ThreeH AC10 is designed with a modern wood cube aesthetic, integrating seamlessly into various home and office environments. Its key features include:

• Paparan led: Menunjukkan masa, tarikh dan suhu.
• Pelbagai fungsi: Time (12/24H), Alarm (up to 3), Calendar, Temperature (F/C).
• Kawalan Bunyi: Display activates with sound or touch, conserving energy.
• Kecerahan boleh laras: Three levels of display brightness.
• Pilihan Kuasa Dwi: USB cable or AAA batteries.
• Time Memory Function: Retains settings during power interruptions (with backup batteries).

Imej 2.1: Depan view of the ThreeH AC10 Digital Wood Cube Alarm Clock.

3. Persediaan

3.1 Bekalan Kuasa

The clock can be powered by either a USB cable or AAA batteries.

• Kuasa USB: For continuous display and optimal performance, connect the provided USB cable to a 5V DC adapter (not included) or a USB port.
• Kuasa Bateri: For portable use or as a backup, install 4 AAA batteries (not included). Note that battery power is primarily for the sound control mode to conserve energy, as continuous display will drain batteries quickly.

3.2 Pemasangan Bateri

1. Cari petak bateri di belakang jam.
2. Buka penutup bateri.
3. Masukkan 4 bateri AAA baharu, pastikan kekutuban yang betul (+/-).
4. Tutup penutup bateri dengan selamat.

Image 3.1: Battery compartment and USB cable connection.

3.3 Button Identification

The control buttons are located on the back of the clock:

• SET: Used to enter setting modes and confirm selections.
• KE ATAS: Used to increase values or navigate menu options.
• TURUN: Used to decrease values or navigate menu options.
• TETAP SEMULA: A small button (often recessed) to reset the clock to factory defaults. Use a thin object like a paperclip to press.

Image 3.2: Back panel with control buttons and power input.

4. Arahan Operasi

4.1 Basic Settings (Time, Date, Temperature Unit)

1. Tekan ke SET button once to enter the setting mode. The display will flash.
2. guna UP or TURUN untuk menyesuaikan nilai. Tekan SET untuk mengesahkan dan beralih ke tetapan seterusnya.
3. The sequence is typically: Year → Month → Day → 12/24H Format → Hour → Minute → Temperature Unit (Celsius/Fahrenheit).
4. After setting the temperature unit, press SET sekali lagi untuk keluar dari mod tetapan.

4.2 Tetapan Penggera

The clock supports up to three independent alarms (A1, A2, A3).

1. From normal display mode, press SET repeatedly until 'A1' (or 'A2', 'A3') appears.
2. Tekan dan tahan SET to enter the alarm setting mode. The alarm hour will flash.
3. guna UP or TURUN untuk menetapkan jam penggera yang diingini, kemudian tekan SET.
4. guna UP or TURUN untuk menetapkan minit penggera yang diingini, kemudian tekan SET.
5. The display will show 'ON' or '--' (OFF). Use UP or TURUN to enable (ON) or disable (OFF) the alarm, then press SET untuk mengesahkan.
6. Repeat for A2 and A3 if needed.

Image 4.1: Setting multiple alarms (A1, A2, A3).

4.3 Fungsi Tunda

When an alarm sounds, press any button (except RESET) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (default snooze duration is typically 5 minutes, refer to specific product documentation if available for exact duration). To turn off the alarm completely, press the TETAP SEMULA button or let it ring for its full duration.

4.4 Display Modes (DP-1, DP-2)

The clock offers different display modes:

• DP-1 (Fixed Display): The display shows time continuously.
• DP-2 (Alternating Display): The display cycles between time, date, and temperature.

To switch between DP-1 and DP-2, press the UP button in normal display mode.

Image 4.2: Display modes DP-1 and DP-2.

4.5 Sound Control Mode (Energy-saving)

In sound control mode, the display will turn off after a short period to save energy. It will reactivate when a sound (e.g., clap, tap) or touch is detected.

• To enable/disable sound control, press the TURUN button in normal display mode.
• When sound control is active, the display will show 'SD' (Sound Detect) or similar indicator. When disabled, it may show '--' or remain continuously on (if powered by USB).

Image 4.3: Illustration of sound control activation.

4.6 Pelarasan Kecerahan

The display has three brightness levels (L1, L2, L3).

1. Tekan dan tahan butang UP button in normal display mode.
2. The display will show the current brightness level (e.g., 'L3').
3. guna UP or TURUN to cycle through L1 (lowest), L2 (medium), and L3 (highest).
4. Lepaskan UP butang untuk mengesahkan pilihan anda.

Image 4.4: Brightness levels L1, L2, L3.

5. Penyelenggaraan

• Pembersihan: Wipe the clock surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Penggantian Bateri: Replace all 4 AAA batteries simultaneously when the display dims or functions become erratic. Do not mix old and new batteries.
• penempatan: Place the clock on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity.

6. Penyelesaian masalah

• Display is off or not staying on:
      a. Check if the clock is in Sound Control (SD) mode. Press the TURUN button to toggle this mode. If you desire a continuous display, ensure SD mode is off and the clock is powered via USB.
      b. If using batteries, they might be low. Replace with fresh AAA batteries.
• Difficulty setting time/alarms:
      a. Ensure you are pressing and holding the SET button to enter the setting mode, and pressing it briefly to confirm each step.
      b. Refer to sections 4.1 and 4.2 for detailed instructions.
• Clock resets after power failure:
      a. Ensure backup AAA batteries are installed and have sufficient charge. The batteries provide power memory during USB power interruptions.
• Display is too bright or too dim:
      a. Adjust the brightness levels as described in section 4.6.
• Tiada paparan:
      a. Check power source. Ensure USB cable is securely connected or batteries are correctly installed and charged.
      b. Tekan TETAP SEMULA button using a thin object to perform a factory reset.

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information and customer support, please refer to the documentation included with your purchase or contact the seller directly. Keep your purchase receipt for any warranty claims.