1. Persediaan dan Pemasangan
The Anet ET4 3D Printer comes pre-assembled, requiring minimal setup before its first use. Follow these steps to quickly assemble and prepare your printer for operation.
1.1 Membuka Kotak dan Pemeriksaan Awal
Carefully open the packaging and remove the printer components. Ensure all parts are present and undamaged according to the packing list provided in the manual.
Image: The Anet ET4 3D Printer as it appears in its packaging, accompanied by example 3D printed models of a snowman and a Christmas tree.
1.2 Main Frame Assembly
The printer's metal frame is designed for quick assembly, typically within 10 minutes. Secure the main frame components using the provided screws and connect the necessary cords.
Image: Visual guide illustrating the simple assembly process of the Anet ET4, highlighting the minimal number of screws and cords required for quick setup.
For a detailed visual guide on assembly, refer to the official setup video:
Video: Official Anet Auto Leveling ET4 DIY 3D Printer setup guide, demonstrating the assembly process including connecting components and initial power-up.
1.3 Perataan Katil
The Anet ET4 features 25-point automatic bed leveling, simplifying the calibration process. This function ensures optimal print adhesion and quality. Before leveling, it is crucial to adjust the sensor. You may also need to remove the rubber under the heatbed for proper calibration.
Image: Illustration of the automatic bed leveling feature, showing the print head moving towards the print bed to detect optimal height.
The printer's intuitive 2.8-inch color touchscreen allows for easy navigation and control of leveling settings.
Imej: A terperinci view of the printer's touchscreen interface, displaying key functions for printing, preparation, and settings.
2. Mengendalikan Pencetak
The Anet ET4 is designed for user-friendly operation, incorporating features that enhance the printing experience.
2.1 Filament Management
The printer supports automatic loading and unloading of filament. It also includes a filament detection system that alerts you when the filament is running low or has ended, preventing "air-printing" (printing without filament).
The ET4 is compatible with PLA 1.75mm filament.
2.2 Fungsi Percetakan Resume
One of the key features of the Anet ET4 is its ability to resume printing from the exact point it left off in case of unexpected power outages. This industrial-grade chipset ensures reliable and continuous operation.
Image: Visual representation of the printer's power outage recovery, demonstrating its capability to resume prints after an interruption.
2.3 Printing with PLA and TPU
The Anet ET4 is versatile and can print with various materials, including PLA and TPU. Ensure proper settings are applied for each material to achieve optimal results.
Video: A customer-shared video demonstrating the Anet ET4 in action, including the printing of various objects and showing the process of designing and preparing molds for concrete using 3D printed parts.
3. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your Anet ET4 3D Printer.
3.1 Post-Print Care
After each print, carefully remove the printed object from the print bed. If printing molds, ensure to spread petroleum jelly or baby oil inside the mold pieces for easy removal of the cast material. Any imperfections on printed parts can be repaired by sanding.
3.2 Ciri-ciri Keselamatan
The Anet ET4 is designed with safety in mind, incorporating features such as overcurrent protection, overload protection, over-temperature protection, and pre-over-temp alarms. Always ensure these systems are functioning correctly and do not bypass them.
4. Penyelesaian masalah
If you encounter issues with your Anet ET4, refer to the following common troubleshooting tips. For more complex problems, consult the official Anet support channels.
4.1 Isu Kualiti Cetakan
If prints are not adhering to the bed or show inconsistencies, re-check your bed leveling. Ensure the auto-leveling sensor is correctly adjusted, especially if you have changed the print surface (e.g., from aluminum to glass). Perform adjustments with the bed and nozzle at operating temperatures for best results.
4.2 Masalah Kesambungan
If the printer fails to connect to your computer or software, verify all cable connections. Ensure the correct drivers are installed and that the printer's firmware is up to date. In some cases, a firmware re-flash might be necessary, but proceed with caution as incorrect procedures can lead to further issues.
4.3 Filament Feeding Issues
If the filament is not loading or unloading correctly, check for any blockages in the extruder or Bowden tube. Ensure the filament detection sensor is clean and unobstructed. If the printer pauses and requests filament, ensure you load the new filament promptly to avoid print failures.
5. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | ET4 |
| Teknologi Percetakan | FDM |
| Filamen | PLA 1.75mm |
| Kuasa Mesin | 200W |
| Bekalan Kuasa | 240W |
| Saiz Cetakan | 220x220x250mm |
| Saiz Mesin | 440x340x480mm |
| Kelajuan Mencetak | ≤150mm/s (recommended speed 30-60mm/s) |
| Resolusi Cetakan | ±0.1mm |
| Ketebalan kepingan | 0.1-0.3mm |
| Mesin Berat Bersih | 7.2 ± 0.2kg |
| Diameter muncung Piawai | 0.4mm |
| Suhu Hotbed | ≤100°C |
| Suhu Kerja Extruder | ≤250°C |
| Bahasa | Inggeris/Cina |
| Dispenser Filamen Auto | ya |
| Pengesanan Filamen | ya |
| Meratakan Auto | ya |
| Resume Percetakan | ya |
| Offline Print | ya |
6. Waranti dan Sokongan
Anet is committed to providing high-quality products and services. The ET4 3D Printer comes with a one-year warranty for the assembled machine. For detailed warranty conditions, please refer to the Warranty Card included with your product.
For any comments or suggestions about our products and services, please feel free to contact us. Anet provides support and responds within 24 hours.
- rasmi Webtapak: www.anet3d.com
- Halaman Facebook: facebook.com/anettech
