1. Pengenalan
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.
2. Maklumat Keselamatan
- Baca semua arahan dengan teliti sebelum pemasangan dan operasi.
- Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
- Pastikan peranti dipasang di lokasi yang stabil untuk mengelakkan terjatuh secara tidak sengaja.
- Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
- Jauhkan peranti daripada capaian kanak-kanak.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
- Pendakap Pemasangan 1x
- 1x Set of Screws and Wall Plugs
- 1x Battery (Alkaline)
- 1x Quick Start Guide (this manual)
4. Produk Lebihview
The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.
Rajah 1: Depan view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.
Komponen Utama:
- PIR Lens: Detects infrared radiation from moving bodies.
- Penunjuk LED: Provides status feedback (e.g., detection, low battery).
- Petak Bateri: Meletakkan sumber kuasa.
- Titik Pemasangan: For secure installation on a wall.
- Tamper Suis: Triggers an alarm if the sensor cover is opened.
5. Persediaan
5.1. Pemasangan Bateri
- Open the sensor's front cover by gently prying it open from the bottom notch.
- Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
- Close the front cover, ensuring it clicks securely into place.
5.2. Memasang Penderia
The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.
- Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
- Gunakan pendakap pelekap sebagai templat untuk menandakan kedudukan skru pada dinding.
- Drill holes at the marked positions and insert the wall plugs.
- Pasangkan pendakap pelekap pada dinding menggunakan skru yang disediakan.
- Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.
5.3. Pairing with a Security System
Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:
- Putting your security system into "pairing" or "enrollment" mode.
- Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
- Confirming successful pairing through the system's interface or LED indicators.
6. Mengendalikan Penderia
6.1. Detection Principle
The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.
6.2. Status Penunjuk LED
- Brief Flash: Indicates motion detection.
- Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
- Tiada Cahaya: Normal standby mode, or battery is completely depleted.
6.3. Detection Range and Coverage
The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view bukannya langsung ke arahnya.
7. Penyelenggaraan
7.1. Pembersihan
Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.
7.2. Penggantian Bateri
When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.
7.3. Pemeriksaan Berkala
Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Sensor tidak mengesan gerakan. |
|
|
| Penggera palsu. |
|
|
| LED indicator flashing continuously. | Bateri lemah. | Gantikan bateri. |
| Sensor not communicating with the security system. |
|
|
9. Spesifikasi
- Jenama: Intelbras
- model: IVP2000SF
- Sumber Kuasa: Dikuasakan bateri
- Jenis Bateri: Beralkali
- Jenis Pemasangan: Lekap di dinding
- Peranti Serasi: Intelbras security systems and smart home hubs
- Dimensi Produk: Kira-kira 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 inci)
- Kaedah Pengesanan: Inframerah Pasif (PIR)
- Julat Pengesanan: Sehingga 12 meter (39 kaki)
- Sudut Pengesanan: Lebih kurang 90 darjah
- Persekitaran Operasi: Penggunaan dalaman sahaja
10. Maklumat Waranti
Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras weblaman web atau hubungi khidmat pelanggan mereka. Simpan bukti pembelian anda untuk tuntutan jaminan.
11. Sokongan
If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:
- Webtapak: Lawati Intelbras rasmi webtapak untuk sumber sokongan, Soalan Lazim dan maklumat hubungan.
- telefon: Refer to the contact section on the Intelbras webtapak untuk nombor sokongan tempatan.
