pengenalan
This manual provides essential information for the setup, operation, and maintenance of your Klipsch Synergy Black Label F-300 Floorstanding Speaker. Designed with Klipsch Tractrix Horn technology, an aluminum diaphragm compression driver, and dual 8-inch copper IMG woofers, this speaker delivers room-filling sound for movies, music, and gaming. Please read these instructions carefully to ensure optimal performance and longevity of your speaker.
Persediaan
1. Membongkar
Keluarkan pembesar suara dari pembungkusannya dengan berhati-hati. Periksa sebarang tanda kerosakan. Simpan pembungkusan untuk pengangkutan atau penyimpanan pada masa hadapan.
2. penempatan
For optimal sound performance, place your F-300 speakers 6 to 15 feet (approximately 1.8 to 4.5 meters) apart. Ensure they are positioned at least 24 inches (approximately 60 cm) from both the back and side walls. This spacing helps to create a balanced soundstage and prevent excessive bass buildup.
Figure 1: Klipsch Synergy Black Label F-300 Floorstanding Speaker, showcasing its tall, black cabinet and copper-colored woofers.
3. Sambungan
The F-300 speaker must be connected to an AV receiver or amplifier for both audio signal and power. Speaker wire is not included and must be purchased separately. Ensure proper polarity (+ to + and - to -) when connecting the speaker to your amplifier to avoid phase issues that can degrade sound quality.
Figure 2: Detail of the dual 8-inch spun copper Injection Molded Graphite (IMG) woofers, designed for tight, musical bass reproduction.
Mengendalikan Speaker
Once properly set up and connected to your audio system, the Klipsch F-300 is ready to deliver high-fidelity sound. These speakers are designed to fill large rooms with lifelike music and film sound reproduction, offering accurate, non-fatiguing sound for hours of listening pleasure.
Ciri-ciri Bunyi
- Dynamic Tweeter: Features a 1-inch aluminum diaphragm compression driver with Klipsch Tractrix Horn technology for crisp, clear high frequencies and wide dispersion.
- High-Output Woofers: Dual 8-inch copper IMG woofers provide powerful, deep bass and rich mid-range.
- Kecekapan: Highly efficient design produces more output using less energy, allowing for louder playback with less distortion.
Figure 3: The aluminum diaphragm compression driver (tweeter) integrated into the Tractrix Horn, responsible for producing crystal-clear high frequencies.
Penyelenggaraan
To maintain the aesthetic and acoustic performance of your Klipsch F-300 speakers, follow these simple maintenance guidelines:
- Pembersihan: Use a soft, dry cloth to gently wipe the cabinet surfaces. Avoid abrasive cleaners or solvents, which can damage the finish.
- Penjagaan gril: The speaker features a magnetic grille. It can be easily removed for cleaning or for a different aesthetic preference. Handle the grille gently to prevent damage.
- Berhabuk: Regularly dust the speaker, especially the tweeter and woofer cones if the grille is removed, using a soft brush or microfiber cloth.
- Keadaan Persekitaran: Avoid placing the speaker in direct sunlight, near heat sources, or in areas with high humidity to prevent material degradation.
Figure 4: The F-300 speaker featuring its contemporary black ash vinyl finish, designed to complement various home decors.
Menyelesaikan masalah
If you encounter any issues with your Klipsch F-300 speaker, please refer to the following common troubleshooting steps:
- Tiada Bunyi:
- Ensure the speaker is correctly connected to the amplifier/receiver with proper polarity.
- Sahkan amplifier/penerima dihidupkan dan sumber input yang betul dipilih.
- Periksa semua sambungan kabel untuk kelonggaran atau kerosakan.
- Bunyi Herot:
- Kurangkan tahap kelantangan pada anda amppenguat/penerima.
- Check speaker wire connections for any frayed strands that might be shorting.
- Ensure the speaker is not overdriven beyond its recommended power handling.
- Weak or Missing Bass:
- Confirm speaker polarity is correct (+ to + and - to -). Incorrect polarity can cause bass cancellation.
- Adjust bass settings on your amppenguat/penerima.
- Review speaker placement relative to walls and corners; repositioning can significantly impact bass response.
- Uneven Soundstage:
- Ensure speakers are equidistant from the primary listening position.
- Check that both speakers are connected and functioning correctly.
For advanced troubleshooting or issues not covered here, consult your AV receiver/amplifier manual or contact Klipsch customer support.
Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nama Model | Klipsch Synergy F-300 |
| Jenis Pembesar Suara | Berdiri lantai |
| Diameter Woofer | 8 Inci (Dwi) |
| Diameter Tweeter | 2.54 Centimeters (1 Inch) |
| Kuasa Output Maksimum Pembesar Suara | 600 Watt |
| Impedans | 8 ohm |
| Respons Kekerapan | 20 Hz (Lower limit, full range not specified) |
| Dimensi Produk (D x W x H) | 22.25"D x 14.5"W x 47.25"H |
| Berat Barang | 60 paun |
| warna | Hitam |
| bahan | Aluminum (for tweeter diaphragm) |
| Teknologi Ketersambungan | berwayar |
| Komponen yang Disertakan | Speaker, Power Cord (external wiring not included) |
Waranti dan Sokongan
Your Klipsch Synergy Black Label F-300 Floorstanding Speaker comes with a Waranti Penuh. For detailed information regarding warranty terms, conditions, and how to obtain service, please refer to the warranty card included with your product or visit the official Klipsch website. For technical support or further assistance, please contact Klipsch customer service.
