ONKRON G120-BLK Single Monitor Wall Mount Instruction Manual
Model: G120-BLK
pengenalan
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
Maklumat Keselamatan
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- Pastikan permukaan pelekap dapat menyokong berat gabungan pelekap dan monitor anda dengan selamat.
- Jangan melebihi kapasiti berat maksimum 17.6 lbs (8 kg).
- Dudukan ini direka bentuk untuk monitor antara 13 dan 34 inci.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- Jauhkan kanak-kanak dan haiwan peliharaan semasa pemasangan.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- Plat VESA
- Plat Dinding
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- Kunci Allen (6mm)
- Manual Arahan
Persediaan dan Pemasangan
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
Panduan Video Pemasangan
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
Langkah 1: Menanda Lubang Gerudi
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
Langkah 2: Memasang Mount
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- Pasangkan plat dinding pada dinding menggunakan skru dan sauh yang sesuai. Pastikan ia dipasang dengan kukuh dan rata.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- Gunakan kekunci Allen yang disediakan untuk memutar skru:
- pusing lawan arah jam for lighter screens (to reduce tension).
- pusing mengikut arah jam for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal viewkeselesaan.
- Pelarasan Ketinggian: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- Pelanjutan/Penarikan Balik: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- Condong: Adjust the monitor tilt from +90° to -45° to reduce glare and find your preferred viewsudut ing.
- Pusing: Swivel the monitor 180° left or right.
- Putaran: Putar monitor 360° untuk orientasi landskap atau potret.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
Pengurusan Kabel
Utilize the integrated cable management system to keep your workspace tidy.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
Imej: Jarak dekat view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your monitor mount.
- Pembersihan: Lap pelekap dengan lembut, damp kain. Elakkan pembersih atau pelarut yang melelas.
- Pemeriksaan Berkala: Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu.
- Pelarasan Spring Gas: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
Menyelesaikan masalah
Rujuk bahagian ini untuk penyelesaian kepada isu biasa.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Monitor sags or does not stay at desired height. | Gas spring tension is too low for the monitor's weight. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | Gas spring tension is too high for the monitor's weight. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Gunung berasa tidak stabil atau goyah. | Loose connections or improper wall installation. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | Sendi terlalu ketat. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
Spesifikasi
- model: G120-BLK
- Keserasian Saiz Skrin: 13 - 34 inci
- Kapasiti Berat: 2.2 - 17.6 paun (1 - 8 kg)
- Keserasian VESA: 75x75mm, 100x100mm
- Sudut Kecondongan: +90° hingga -45°
- Sudut Pusing: 180°
- Putaran: 360°
- Pelarasan Ketinggian: 11 inci (28 cm)
- Arm Extension: 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm)
- Bahan: aluminium
- Dimensi Produk: 16.34 x 2.28 x 6.61 inci (41.5 x 5.8 x 16.8 cm)
- Berat Barang: 3.96 paun (1.8 kg)
Waranti dan Sokongan
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON webtapak.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
Maklumat Hubungan: Please refer to the ONKRON website or product packaging for the most up-to-date contact details.
