SKYRC D400 Ultimate Duo 400W AC/DC Balance Charger Instruction Manual

1. Pengenalan

The SKYRC D400 Ultimate Duo is a high-performance, dual-channel AC/DC balance charger designed for charging various battery types, including LiPo, LiHV, LiFe, LiIon, NiMH, NiCd, and Pb batteries. It features two independent circuits, allowing simultaneous charging of two different battery types. The charger supports power distribution in both AC and DC modes to optimize charging efficiency and reduce charging time. Additionally, Channel 2 can function as a DC power supply, providing up to 150 watts for external DC devices.

2. Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• SKYRC D400 Charger Unit
• Kord Kuasa AC
• Cable XH Adaptor
• Banana connectors with XT60 connector Charging Cable
• Additional Charging Cable
• Manual Arahan

Image: The SKYRC D400 charger with its AC power cord, XH adaptor, banana connectors with XT60 charging cable, and instruction manual.

3. Produk Lebihview

The SKYRC D400 features a robust design with clear labeling for all ports and controls. Understanding the layout is crucial for safe and efficient operation.

Imej: Atas ke bawah view of the SKYRC D400 charger highlighting the output sockets (4mm Banana Plug), Temperature Sensor Port, USB Port, Micro USB Port for PC Link, Balance Lead Socket, and Cooling Fan.

Komponen utama termasuk:

• Output Sockets (4mm Banana Plug): For connecting main battery leads.
• Port Sensor Suhu: For connecting an optional temperature sensor to monitor battery temperature during charging.
• Port USB: For firmware updates or charging USB-powered devices.
• Micro USB Port for PC Link: For connecting to a computer for advanced settings and data logging.
• Balance Lead Socket: For connecting battery balance leads to ensure even cell voltage semasa mengecas.
• Kipas Penyejuk: Aktif secara automatik untuk menghilangkan haba semasa operasi.
• DC Input (11-18V): For connecting to an external DC power source.
• Output DC: Channel 2 can provide up to 150W DC power for external devices.

Imej: Sisi view of the SKYRC D400 charger, clearly showing the DC Input (11-18V), DC Output, and Smart Fan with a "DO NOT COVER!" warning.

4. Persediaan

4.1 Sambungan Kuasa

The D400 charger can be powered by either AC (Alternating Current) or DC (Direct Current) sources.

• Kuasa AC: Connect the provided AC power cord to the AC input port on the charger and then to a standard 100-240V AC mains outlet.
• Kuasa DC: Connect an external DC power source (11-18V) to the DC input port on the charger. Ensure the polarity is correct.

4.2 Sambungan Bateri

Before connecting any battery, ensure the charger is powered on and the correct battery type and charging parameters are selected on the display.

1. Connect the main charging cable (e.g., banana connectors with XT60) to the appropriate output socket (CHA or CHB) on the charger.
2. Connect the main charging cable to your battery.
3. Connect the battery's balance lead to the corresponding balance lead socket on the charger. This is crucial for balanced charging of multi-cell batteries.
4. Repeat for the second channel if charging two batteries simultaneously.

5. Arahan Operasi

5.1 Basic Charging Process

After connecting the battery, the charger will typically detect the battery type or prompt you to select it. Follow the on-screen instructions to set the charging parameters.

1. Navigate through the menu using the control buttons to select the desired charging mode (e.g., Charge, Balance Charge, Fast Charge, Storage, Discharge).
2. Select the battery type (e.g., LiPo, NiMH) and the number of cells (e.g., 1S-7S for LiPo).
3. Set the desired charging current (Amps). Refer to your battery's specifications for recommended charging rates.
4. Confirm the settings and start the charging process. The charger will display real-time charging information.

5.2 Operasi Dwi-Saluran

The D400 features two independent charging channels (CHA and CHB), allowing you to charge two different batteries simultaneously with different settings.

• Connect the first battery to CHA and configure its settings.
• Connect the second battery to CHB and configure its settings independently.
• Start charging for both channels.

5.3 Pengagihan Kuasa

The charger supports intelligent power distribution. For example, if the total power is 400W, Channel 1 can draw 300W while Channel 2 draws 100W. Note that the maximum power for Channel 2 is 200W, while Channel 1 can reach 400W. This feature optimizes charging speed when using both channels.

5.4 DC Power Supply Function

Channel 2 of the D400 can act as a DC power supply, providing a maximum of 150 watts DC power. This allows you to power various DC devices directly from the charger.

• Ensure no battery is connected to Channel 2 for charging.
• Select the DC Power Supply mode for Channel 2 from the menu.
• Tetapkan vol keluaran yang dikehendakitage (6-15V DC adjustable).
• Connect your DC device to the DC Output port on Channel 2.

5.5 App Remote Control and Monitoring

The charger may support remote control and monitoring via a dedicated mobile application (e.g., ISDT Link or similar). This allows you to view charging status, adjust parameters, and end charging processes remotely.

6. Penyelenggaraan

• Pastikan pengecas bersih dan bebas daripada habuk dan serpihan. Gunakan kain lembut dan kering untuk pembersihan.
• Ensure proper ventilation around the charger. Do not block the cooling fan or air vents.
• Simpan pengecas di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
• Regularly inspect cables and connectors for any signs of wear or damage. Replace damaged components immediately.

7. Penyelesaian masalah

• Pengecas tidak dihidupkan: Check the AC power cord connection or DC input source. Ensure the power outlet is functional.
• Battery not detected: Verify that the main charging leads and balance leads are securely connected to both the charger and the battery. Ensure the battery type and cell count are correctly selected.
• Charging error message: Consult the charger's display for specific error codes or messages. Refer to the full manual (if available) for detailed explanations and solutions. Common issues include incorrect battery settings, damaged battery, or connection problems.
• Terlalu panas: Ensure the charger has adequate ventilation and the cooling fan is not obstructed. Reduce the charging current if necessary.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please contact SKYRC directly or refer to the official product webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.