E-flite Carbon-Z Cessna 150 2.1M BNF Basic RC Airplane Instruction Manual

1. Produk Lebihview

The E-flite Carbon-Z Cessna 150 2.1M BNF Basic is a large-scale remote control aircraft designed for sport flying. This model offers a wide flight envelope, suitable for various flying styles. It incorporates scale details and features for an enhanced experience.

Ciri-ciri Utama:

• Large sport-scale model suitable for diverse flight maneuvers.
• Wide flight envelope, accommodating both gentle and aggressive flying.
• Scale details including LED lights, functional flaps, and wheel pants.
• Designed for field assembly without requiring tools.
• Innovative hands-free servo connection system for simplified setup.

Rajah 1.1: Depan view of the E-flite Carbon-Z Cessna 150 2.1M RC Airplane.

2. Maklumat Keselamatan

AMARAN: Baca manual arahan KESELURUHAN untuk membiasakan diri dengan ciri-ciri produk sebelum beroperasi. Kegagalan untuk mengendalikan produk dengan betul boleh mengakibatkan kerosakan pada produk, harta peribadi dan menyebabkan kecederaan serius. Ini adalah produk hobi yang canggih. Ia mesti dikendalikan dengan berhati-hati dan akal dan memerlukan beberapa keupayaan mekanikal asas. Kegagalan untuk mengendalikan Produk ini dengan cara yang selamat dan bertanggungjawab boleh mengakibatkan kecederaan atau kerosakan pada produk atau harta benda lain. Produk ini tidak bertujuan untuk digunakan oleh kanak-kanak tanpa pengawasan orang dewasa secara langsung. Jangan gunakan dengan komponen yang tidak serasi atau ubah produk ini dalam apa jua cara di luar arahan yang diberikan oleh Horizon Hobby, LLC. Manual ini mengandungi arahan untuk keselamatan, operasi dan penyelenggaraan. Adalah penting untuk membaca dan mengikuti semua arahan dan amaran dalam manual, sebelum pemasangan, persediaan atau penggunaan, untuk beroperasi dengan betul dan mengelakkan kerosakan atau kecederaan serius.

3. Apa yang ada di dalam Kotak

• Carbon-Z Cessna 150 BNF Basic RC Airplane

Note: Additional components such as a compatible Spektrum DSMX/DSM2 transmitter, flight battery, and charger are required and sold separately.

4. Persediaan dan Pemasangan

4.1 Wing Assembly

1. Carefully slide each wing panel onto the wing tube until it is fully seated against the fuselage.
2. Ensure the hands-free servo connections engage properly.
3. Secure each wing panel using the provided fasteners or pins, as indicated in the manual.

Figure 4.1: Detail of component assembly, showing a pin being inserted.

4.2 Pemasangan Gear Pendaratan

Attach the main landing gear and tail wheel assembly according to the diagrams. Ensure all connections are secure. The model features wheel pants for scale appearance.

4.3 Servo Connections

The Carbon-Z Cessna 150 utilizes an innovative hands-free servo connection system. When assembling the wings, ensure the servo connectors align and engage automatically. Verify all control surfaces move freely and correctly after assembly.

Figure 4.2: Detail of the hands-free servo connection system.

4.4 Battery Installation and Binding

1. Install the recommended flight battery (sold separately) into the designated battery compartment. Secure it to prevent movement during flight.
2. Follow the instructions for your Spektrum DSMX/DSM2 compatible transmitter to bind it with the aircraft's receiver. Refer to your transmitter's manual for specific binding procedures.
3. After binding, perform a control surface test to ensure all controls (ailerons, elevator, rudder, throttle) respond correctly to transmitter inputs.

5. Arahan Operasi

5.1 Pemeriksaan Pra-Penerbangan

• Pastikan bateri penerbangan dicas sepenuhnya dan dipasang dengan selamat.
• Verify all control surfaces move freely and in the correct direction relative to transmitter inputs.
• Check propeller for any damage or looseness.
• Confirm the transmitter battery is adequately charged.
• Lakukan pemeriksaan jarak sistem radio anda sebelum penerbangan pertama pada hari tersebut.

5.2 Berlepas

Place the aircraft on a smooth surface facing into the wind. Gradually advance the throttle. Apply slight up-elevator as speed increases to lift off. Maintain a steady climb rate.

5.3 Penerbangan

The Carbon-Z Cessna 150 is designed for stable flight characteristics. Use the ailerons for roll control, elevator for pitch, and rudder for yaw. Adjust throttle to control speed. Utilize flaps for slower flight and improved lift during takeoff and landing, if desired.

Figure 5.1: The Carbon-Z Cessna 150 in stable flight.

5.4 Mendarat

Approach the landing strip into the wind. Reduce throttle and gradually deploy flaps if using them. Maintain sufficient airspeed for control. Flare gently by applying up-elevator just before touchdown to achieve a smooth landing.

6. Penyelenggaraan

6.1 Post-Flight Inspection

• Periksa kerangka pesawat udara untuk sebarang kerosakan, retakan atau komponen yang longgar.
• Check all control linkages and hinges for wear or looseness.
• Examine the propeller and spinner for damage. Replace if necessary.
• Ensure landing gear is secure and undamaged.

6.2 Pembersihan dan Penyimpanan

Bersihkan pesawat dengan kain lembut,amp cloth. Avoid using harsh chemicals. Store the model in a cool, dry place, away from direct sunlight and extreme temperatures, to preserve its materials and electronics.

7. Penyelesaian masalah

8. Spesifikasi

Figure 8.1: The Carbon-Z Cessna 150 demonstrating its substantial size.

9. Maklumat Waranti

This product is covered by a limited warranty provided by Horizon Hobby, LLC. For detailed warranty terms and conditions, please refer to the official Horizon Hobby weblaman web atau hubungi khidmat pelanggan mereka. Bukti pembelian mungkin diperlukan untuk tuntutan jaminan.

10. Sokongan Pelanggan

For technical assistance, spare parts, or further information regarding your E-flite Carbon-Z Cessna 150, please visit the official E-flite or Horizon Hobby website. You can also contact their customer service department directly for support.

E-flite Store: Lawati Kedai E-flite di Amazon