Oster Day Light Programmable Coffee Maker OCAF500

Perlindungan Penting

Apabila menggunakan peralatan elektrik, langkah berjaga-jaga keselamatan asas hendaklah sentiasa diikuti untuk mengurangkan risiko kebakaran, kejutan elektrik dan/atau kecederaan kepada orang, termasuk yang berikut:

• Baca semua arahan sebelum menggunakan produk ini.
• Jangan sentuh permukaan panas. Gunakan pemegang atau tombol.
• Untuk melindungi daripada renjatan elektrik, jangan rendam kord, palam atau perkakas dalam air atau cecair lain.
• Pengawasan rapi diperlukan apabila sebarang perkakas digunakan oleh atau berhampiran kanak-kanak.
• Cabut plag dari soket apabila tidak digunakan dan sebelum membersihkan. Biarkan sejuk sebelum memakai atau menanggalkan bahagian, dan sebelum membersihkan perkakas.
• Jangan kendalikan sebarang perkakas dengan kord atau palam yang rosak atau selepas perkakas tidak berfungsi, atau telah rosak dalam apa jua cara. Kembalikan perkakas ke kemudahan servis sah terdekat untuk pemeriksaan, pembaikan atau pelarasan.
• Penggunaan lampiran aksesori yang tidak disyorkan oleh pengilang perkakas boleh mengakibatkan kebakaran, renjatan elektrik atau kecederaan kepada orang.
• Jangan gunakan di luar rumah.
• Jangan biarkan kord tergantung di tepi meja atau kaunter, atau menyentuh permukaan panas.
• Jangan letakkan pada atau berhampiran gas panas atau penunu elektrik, atau dalam ketuhar yang dipanaskan.
• Sentiasa pasangkan plag pada perkakas dahulu, kemudian palamkan kord ke dalam salur keluar dinding. Untuk memutuskan sambungan, matikan mana-mana kawalan kepada "mati", kemudian tanggalkan palam dari alur keluar dinding.
• Jangan gunakan perkakas untuk kegunaan selain daripada yang dimaksudkan.
• Melecur mungkin berlaku jika penutup ditanggalkan semasa kitaran membancuh.
• Perkakas ini adalah untuk kegunaan rumah sahaja.

Produk Selesaiview

Familiarize yourself with the components of your Oster Day Light Programmable Coffee Maker.

Rajah 1: Depan view of the Oster Day Light Programmable Coffee Maker. It features a black and stainless steel design with a glass carafe and a digital control panel at the base.

• Takungan Air: Located at the back, with a clear window for water level indication.
• Tudung: Hinged lid covering the water reservoir and filter basket area.
• Bakul Penapis: Removable basket that holds the permanent filter or paper filter.
• Penapis Kekal: Penapis boleh diguna semula, menghapuskan keperluan penapis kertas.
• Kepala Pancuran: Mengagihkan air secara merata ke atas serbuk kopi.
• Teko Kaca: 1.2-liter capacity glass carafe with a handle and measurement markings.
• Plat Pemanas: Membuat kopi yang dibancuh tetap hangat.
• Panel Kawalan: Digital display with buttons for programming, setting time, and auto-brew functions.

Rajah 2: Atas view of the coffee maker with the lid open, revealing the removable filter basket and the permanent filter inside. This shows where coffee grounds are placed.

Rajah 3: Close-up of the coffee maker's base, highlighting the digital control panel with 'Prog', 'Hora' (Hour), 'Min' (Minute), and 'Auto' buttons, along with the heating plate for the carafe.

Persediaan

Membongkar

1. Keluarkan semua bahan pembungkusan dari pembuat kopi dengan berhati-hati.
2. Ensure all parts listed in the Product Overview section are present and undamaged.

Sebelum Penggunaan Pertama

Before brewing coffee for the first time, it is recommended to clean the coffee maker.

1. Wash the glass carafe, permanent filter, and filter basket in warm, soapy water. Rinse thoroughly and dry.
2. Isi takungan air dengan air bersih sehingga paras pengisian MAKSIMUM.
3. Place the permanent filter (or a paper filter) into the filter basket, and then place the filter basket into its housing. Do not add coffee grounds.
4. Letakkan bekas kaca kosong di atas plat pemanas.
5. Plug the coffee maker into a 110V electrical outlet.
6. Run a full brewing cycle with only water. Discard the water from the carafe.
7. Repeat this process once more to ensure the appliance is clean and free of any manufacturing residues.

Menetapkan Jam

After plugging in the coffee maker, the digital display will flash. Set the current time:

1. Tekan ke Hora (Hour) button repeatedly until the correct hour is displayed. The clock cycles through AM and PM.
2. Tekan ke Min (Minute) button repeatedly until the correct minute is displayed.
3. The clock will set automatically after a few seconds of inactivity.

Arahan Operasi

Membancuh Kopi

1. Open the lid and fill the water reservoir with fresh, cold water to the desired level, indicated by the markings on the side of the reservoir. Do not exceed the MAX fill line.
2. Place the permanent filter (or a #4 cone paper filter) into the filter basket.
3. Add the desired amount of ground coffee to the filter. A general guideline is one tablespoon of coffee per cup (150ml), but adjust to your taste.
4. Tutup penutup dengan selamat.
5. Pastikan karafe kaca kosong diletakkan dengan betul di atas plat pemanas.
6. Tekan ke HIDUP/MATI button (if available, otherwise the main power button) to start the brewing cycle. The indicator light will illuminate.
7. Once brewing is complete, the coffee maker will automatically switch to the 'keep warm' function. The heating plate will keep the coffee warm for up to 2 hours before automatically shutting off.

Programming the Delay Brew Timer

The intelligent timer allows you to program the coffee maker to start brewing at a specific time up to 24 hours in advance.

1. Prepare the coffee maker for brewing as described in steps 1-5 of "Brewing Coffee" (water, coffee, filter, carafe in place).
2. Tekan ke Prog button. The display will show "AUTO" and the programmed time will flash.
3. Gunakan Hora (Jam) dan Min (Minute) buttons to set the desired time for brewing to begin.
4. After setting the time, press the Prog button again to confirm, or wait a few seconds for it to set automatically. The "AUTO" indicator will remain lit, indicating the delay brew is active.
5. Pembuat kopi akan mula membancuh secara automatik pada masa yang diprogramkan.
6. To cancel the delay brew, press the HIDUP/MATI button (or the main power button) once. The "AUTO" indicator will turn off.

Pembersihan dan Penyelenggaraan

Pembersihan tetap memastikan prestasi optimum dan memanjangkan hayat pembuat kopi anda.

Pembersihan Harian

1. Sentiasa cabut plag pembuat kopi dan biarkan ia sejuk sepenuhnya sebelum dibersihkan.
2. Remove the glass carafe, permanent filter, and filter basket. Wash these parts in warm, soapy water. They are also top-rack dishwasher safe.
3. Lap bahagian luar pembuat kopi, termasuk plat pemanas, dengan kain lembutamp kain. Jangan gunakan pembersih yang melelas atau pad penyental.
4. Never immerse the main unit of the coffee maker in water or any other liquid.

Menyahkerak (Bulanan atau mengikut keperluan)

Mineral deposits from water can build up in your coffee maker, affecting its performance. Descale regularly.

1. Fill the water reservoir with a mixture of one part white vinegar and two parts cold water.
2. Place the permanent filter (without coffee) and the empty glass carafe in position.
3. Jalankan kitaran pembuatan bir penuh.
4. Selepas kitaran, matikan pembuat kopi dan biarkan ia berdiri selama 15 minit.
5. Buang larutan cuka.
6. Fill the water reservoir with fresh, cold water and run two full brewing cycles with only water to rinse thoroughly.

Menyelesaikan masalah

If you experience issues with your coffee maker, consult the following table before contacting customer service.

Spesifikasi

Technical details for the Oster Day Light Programmable Coffee Maker OCAF500.

• Jenama: Oster
• model: OCAF500
• Voltage: 110 Volt
• Kuasa: 800 Watt
• kapasiti: 1.2 Liters (up to 30 small cups of 40ml)
• Bahan: Plastic, Stainless Steel, Glass (carafe)
• Ciri Khas: Automatic shut-off, Programmable timer (up to 24 hours), Reusable filter
• Dimensi Produk (lebih kurang): 29.7 cm (Dalam) x 40.2 cm (Lebar) x 34.9 cm (Tinggi)
• Berat: 2.1 kg
• INMETRO Registration: BRA19-00005

Rajah 4: Dimensional diagram of the coffee maker, indicating approximate measurements of 29.69cm depth, 34.9cm width, and 40.21cm height.

Rajah 5: Safety certification marks, including INMETRO and SGS OCP 0040, indicating compliance with Brazilian safety standards.

Waranti dan Sokongan

For warranty information, product support, or to inquire about replacement parts, please refer to the warranty card included with your product or visit the official Oster website. You may also contact Oster customer service directly for assistance.

Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.